Rotary valve 0.55 kW 19 rpm

JKF JK-S w/

Year of construction: 2026, condition: new, Magnetic separator for spool transport line Pipe magnet with 4 magnetic plates ( permanent magnet ) Hinged door for easy removal of the metal parts Tube diameter: 180 mm Available immediately Ppedecqvhxopfx Adler Location: From stock 54634 Bitburg

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm Ppsdpfofyadbox Adler - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Year of construction: 2022, condition: as good as new (ex-display), AL-KO grinding table AST 1.5 BASIC The AL-KO grinding table AST 1.5 BASIC is the entry-level model for the AL-KO grinding table program. He is certified according to GS-HO-11 and carries the seal of "Holzstaubgeprueft according to BGI 739-1" THEIR advantages accessible from 4 sides Take loads up to 150kg Manual, tool-free height adjustment with scale Contrasting sides for edge grinding Workpiece-friendly beech wood grid (removable) Funnel-shaped air Guide to the dust extraction spout Pedsdqzhbspfx Adlepr TECHNICAL DATA LOAD 1.5 BASIC Intake 140 / 160 mm Required suction power 1.500 m ³/h Negative pressure at the connection at 22 m/s 1.000Pa in DN140mm 700Pa at DN160mm Working height adjustable from 735-1.015 mm Working surface (BxL) 946 x 1, 500 mm Dimensions (Wxl) 1, 000 x 1 600mm Weight 73 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 3,200 h, functionality: fully functional, repeat accuracy: 0.01 mm, travel distance X-axis: 3,002 mm, travel distance Y-axis: 1,502 mm, travel distance Z-axis: 300 mm, positioning accuracy: 0.02 mm, workpiece weight (max.): 4,500 kg, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 300 mm, operating pressure: 4,000 bar, cutting speed: 8,000 mm/min, power of the servo motor: 2,000 W, table load: 4,500 kg, compressed air connection: 6 bar, product height (max.): 300 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Machine: STM 1530 PremiumCut 3D 12° angle compensation Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Great condition, fully functional, purchased new in October 2018. Machine is located in EU, Zagreb, Croatia, possible cutting test at our place. Only 3200 pump operating hours, automatic pressure control, automatic abrasive control, cutting angle compensation, possible upgrade with turning machine and drilling unit for piercing sensitive materials, durable machine frame (aluminium alloy + stainless steel), equipped with high quality parts. 1. Waterjet cutting system STM 1530 PremiumCut 3D 12° angle compensation Robust CNC milled absolutely rust-proof construction in aluminium and stainless steel High-precision robust rack and pinion drive with helically toothed racks Premium guide X & Y axis with Bosch Rexroth™ with high-precision ball-bearing carriage and stainless steel balls Threefold dirt scraper package Working area accessible from 3 sides for simplified loading and unloading Underwater cutting is possible CNC milled workpiece holder with heavy-duty frame for parts with weights of up to 1,000 kg/m² The scope of supply contains the required lubricants and special tools for servicing and maintenance 1.1 CNC operating range X axis: ..... 1,502 mm Y axis: ..... 3,002 mm (bridge) Z axis clearance: ..... 300 mm A axis: ..... 12 degrees B axis: ..... +/- ∞ 1.2 Precision and feed Positioning precision: ..... ± 0.02 mm (per metre at 20°C) Repeatable precision: ..... ± 0.01 mm (per metre at 20°C) Max. feed: ..... 60 m/min A axis feed: ..... 360 deg/s B axis feed: ..... 360 deg/s 1.3 Dimensions & weight Length: ..... approx. 3,750 mm (incl. high-pressure tubing) Width: ..... approx. 4,700 mm Height: ..... approx. 3,400 mm (incl. high-pressure tubing) Weight: ..... 1,500 kg (without water) 2. High pressure pump ECOTRON® 40.37 420 MPa max. design pressure 400 MPa max. permissible operating pressure 380 MPa max. continuous operating pressure 3.8 l/min max. flow rate 37 kW driving power 2.1 Technical details Drive hydraulics with axial piston pump and hydraulic pressure/flow rate control Gear pump for separate cooler/filter circuit Pressure intensifier with drive cylinder and high pressure cylinder 2.49 litre pulsation damper according to Pressure Equipment Directive 97/23/EC Connection for external emergency stop circuit Ppodjvla U Tepfx Adler Electrical and electronic components fitted in control cabinet Hydraulic and high pressure components mounted on a common base frame Compact design, all tubing fitted, all pipework fitted and wired 2.2 Options Included Automatic pressure adjustment from 50 - 400 MPa Cooling via oil/water heat exchanger Pressure relief valve with pneumatic control Check valve on the feed water inlet Double filter element for pre-filtration of the feed water Sound insulation casing Special tools for fitting the high pressure seals incl. torque wrench Water stop check valve Included: machine, high pressure pump, control unit (PC in electronic box), abrasive, spare parts

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free Ppodpfx Adjhqnl Telsr We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: used, functionality: fully functional, Work surface: 1,400 x 5,000 mm Stainless steel lining Drive with 2 x 2.2 kW unbalance motors Psdpetpg A Esfx Adljpr

Condition: good (used), Year of construction: 1990, Rolled metal uncoiling, cutting and coiling line LTs. Line 1300mm/3mm. for precise cutting. For uncoiling, cutting metal, cutting into smaller rolls, coiling into small rolls. The line was bought new, owned by one owner, serviced on time by LTs representatives. The machine is connected and can be tested at any time in Vilnius, Lithuania. The LTs 1300/3 cutting line consists of: Uncoiling decoiler Multi-blade scissors Stop and cut-off segment Spinner with separator Trolley Wardrobe with control panel Technical specifications: Metal width: 1250 mm. Thickness: 700 mm. Diameter min.: 508 mm. Diameter max.: 620 mm. Outer circle diameter: 1200 mm. Maximum weight: 7 T. Width of cut strips min.: 75 mm. Cut tape max. width: 1250 mm. Ppodjpbwapopfx Adlsr Supply voltage: 3 x 380 V. Power: 18 kW. Made in: Poland Year: 1990 If you have more questions, welcome.

Condition: repair required (used), Year of construction: 1997, Hazemag impact separator with air classifier, ready for operation, with vibrating chute and fan Pedpfxjmfq Szj Adljpr

Condition: used, external dimensions: Podpfeb N Nd Usx Adljpr Width/Height: 65 mm Length: 2600 mm Weight: 70 kg

Condition: used, Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan Ppsdpforh Niasx Adlsr -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type EC2-HS160M2-2 -Engine power: 15 kW / 2935 rpm -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 580 x 470 mm -Total dimensions: 930/820/H1220 mm -Weight: 395 kg