passage width:1300x800 mm
weight of the machine ca.:18 t
dimensions of the machine ca.:2400 x 2400 x 5500 m
draw back pressure:50 t
column diameter:200 mm
work height max.:700 mm
Table dimensions:1900 x 800 mm
table height over floor:1000 mm
pestle plate:1300 x 800 mm
pre-running speed:150 mm/sec
work speed:5-10 mm/sec.
return speed:150 mm/sec
quantity of oil:1400 l
pressure 250 t
surface area 1600x500 mm
ram surface 4000x400 mm
distance between table / ram 750 mm
Cylinder 320 mm
total power requirement . kW
weight of the machine ca. 10 t
dimensions of the machine ca. 2000x3500x1700 m
nstallation size: 750 mm Installation height: 600 mm Table: 500 x 1600 mm Ram: 400 x 400 mm Cylinder diameter: 320 mm
Max. cutting force 30 tonnes
Cutting head 400 x 500 mm
Bed size 2300 x 510 mm
Stroke length (adjustable) 10 - 120 mm
Belt width 1800 mm
Operating height 990 mm
Pump motor capacity 1.1 kW 1.5HP
Approx.weight 3560 Kg
Traverse and feed drives closed loop, D.C. servo motors
Feed System “Ping and grab” clamp feed - two fixed,
one travelling clamp
Nylon belt cutting and feeding system
Intermediate cutting board and boar...
Press power of moulding press: 4500 kN (450)
Press table measurements ( width x length: 2200 x 2600 mm
Press stroke: max. 1.310 mm
Diameter of guide column: 4 x 300 mm
Opening speed fast traverse: max. 300 mm/sec.
Closing speed: max. 300 mm/sec.
Control system not available, press was in a line system
Adaptations to the hydraulics + control system are possible by request.
It is available in five equipment variants (35B, 35B-1, 35B-2, 35B-3, 35B-4). The basic machine is equipped with a 4-station turntable and can be expanded to increase the level of automation.
The Illig HSP 35B Heat Welding Press is a machine technology optimized for different packaging solutions
The Illig HSP 35B-3 is semi-automatic: a higher level of automation is achieved by combining the board loader and the packaging lifting device. In this mode of operation, only the blister with the produ...
With 58 years of experience, Collin is a leading company in the field of plastic processing. They mainly focus on R&D and Pilot Lines.
This press was manufactured in 2003 and has fewer than 2000 working hours, which means that the machine is as good as new.
Nominal plate dimensions: 196 x 196 mm
Max. pressing force: 196kN
Max. temperature: 300°C
Max. vacuum pressure: 200 mBar
The press is equipped with a SPS controlling system which is still being serviced and supported by SPS.
passage width:1100 mm
work height max.:900 mm
Table dimensions:1000 x 1000 mm
table height over floor:900 mm
pestle plate:1000 x 1000 mm
Main cylinder:Ø 500 mm
Auxiliary cylinder:2x Ø 120x70 mm
Daylight Opening:900 mm
Approach Speed:150 mm/sec
Pressure Speed:15-3 mm/sec
Return Speed:150 mm/sec
Heating collectors:max 250 °C
Light sensors sick:900 + 150 mm
Monitor:12" SIEMENS Zoll
Machine description: NETSTAL Hdraulic press
Dimensions: 1500 x 1400 x 3500 mm
Weight: approx. 8 tons
Manufacturer: Netstal-Maschienen AG
Year of manufacture: 2002 (Hydraulics and electronics were renovated)
Pressing table dimensions: 840 x 900 mm
Installation height: 520 mm
Shock: 450 mm (HUB)
Opening: 970 mm
Compression force: 162 tons (130 B)
The machine is being worked.
There are electrical and hydraulic drawings about the system.
Net price: 5.000, -USD (without VAT)
The mould carriers are currently in their original condition and the tool can be customized according to customer requirements.
Technical details: -.
Type: Electric FT
Werkzeugeinbaumaße max: B: 1 000 x D: 1, 000 x H: 550mm
Clamping force: Max 10 tons
Swivel base: ± 30 ° swivel upper part: ± 30 °
Machine weight: 2.0 ton
Machine dimensions: (WxDxH) 1,550 x 1,300 x 2,900 mm mould carriers are electrically controlled.
Autonomous Siemens S7 control per mould carriers, the beams can be operated th...
This hose press Parkrimp 1 from the brand manufacturer Parker convinces with its compact design and versatile application possibilities. The hose press is ideal for crimping hydraulic hoses. Hose sizes from DN 6 up to and including DN 32 can be processed with this press. In addition, the machine is equipped with a powerful ABB drive motor with an output of 1.5 kW.
Type: Park crimp 1
Drive motor manufacturer: ABB Motors
Laboratory press, LZT-OK-300-L
in UPPER PISTON DESIGN and CE-compliant.
Year of construction: 04/2015, but the machine is brand new (30 operating hours)
Press area: 1500x1000 mm
Press force: 3,000 kN
One floor - floor clearance 1000 mm
Cylinder stroke range: 800 mm
Working height: approx. 750 mm
Prepared for steel heating plates designed as a tool max. Temp. 250 ° C
Heavy torsion-free and reinforced steel girder construction
Press System for processing freeflowing thermosets
Frame and Tank
- Welded construciton with intergral body
-Safety doors made of perforated sheet metal with a viewing window
-Platen aren 600 x 600 mm
-Min. mould high 350 mm
- Stroke 400 mm
-Clamping Force 150 t/ 1500kN
-Material preheating for process optimization and cycle time reduction
-Manual high adjustme...
The mould carriers are currently in their original condition and can be adapted to the mould according to customer requirements.
Type: Hydraulic Frimo FT
Tool installation dimensions max: W: 1,410x D: 1,350x H: 700 mm
tool weight: 1300Kg max. total
Closing force: max. 17 tons
Parallel stroke: 25 mm
Pivot lower part: ± 61°.
Swivel mould carrier: ± 35°.
Machine weight: 2.5 tons
Machine dimensions: (WxDxH) 2,010 x 1,791 x 1,500 mm
Electr. connected load: 10 KW
The Machineseeker Trust Seal gives buyers the ability to detect at a glance whether they are dealing with a trusted seller or not .
What do we verify?
Check of trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of accessibility to main phone number.
Credit report may not contain negative criteria.
Buyer complaints can lead to withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no entitlement to the grant of the Machineseeker Trust Seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.