Low loader semitrailer

KÄSSBOHRER K.SLS 3 / 0N 18/30 Tieflader mit hydr. Rampen

Condition: good (used), Truck crane Renault 270 DCI 19 tonnes Year : 2002 470.000 km Echange standard engine done at 250 000 km Crane capacity : 5,5 tonnes Technical check : OK Gsdpjrhzy Hjfx Af Teua Pas de télécommande de la grue

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm Guodsxiu Dtspfx Af Tea max. cutting width 600 mm max. cutting height 170 mm motor 11 kW

Condition: like new (used), functionality: fully functional, machine/vehicle number: ZCFC635C805516960, mileage: 80,000 km, power: 132.39 kW (180.00 HP), first registration: 01/2023, fuel type: diesel, maximum load weight: 750 kg, tire size: 195/75 R16C 110/108R, wheelbase: 4,100 mm, energy efficiency: D, color: white, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 400 mm, Year of construction: 2022, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, all-season tires, central locking, crane, cruise control, fog lights, onboard computer, power assisted steering, soot filter, Serviced exclusively at authorized IVECO workshops. Available for test drive. Warranty from 12 to 48 months at advantageous rates. Euro 6D HI-MATIC 8-speed automatic transmission 3 seats in the cab Driver airbag Suspended and heated driver’s seat Manual air conditioning Fog lights Bluetooth DAB car radio with steering wheel controls Adaptive cruise control Assisted braking system Fixed body Copma 35.3 crane with 3 hydraulic extensions Front pole carrier stand Removable rear pole carrier stand Gedpfxjw Ducue Af Tsua Winches for cable tensioning Reinforced leaf springs

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Guedpewuppwsfx Af Toa Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Safety devices and protective guards

Condition: new, Year of construction: 2026, Mini Crawler Crane TB5000 Gujdsibqraspfx Af Toa A mini crane on a crawler chassis designed for indoor and outdoor work. Maximum lifting capacity: 2400 kg. * radio control of the device - driving, working, spreading the feet * double power supply of the crane - diesel and electric 230 V * maximum lifting capacity - 2400 kg * anti-overload system as standard * maximum horizontal reach over 11 m * four hydraulic extensions + 1 manual extension * maximum vertical reach over 13 m * 4 hydraulically lowered supports * weight approx. 2200 kg * height approx. 195 cm * width approx. 88 cm * active arm 16 degrees Additional, optional equipment: * search hook * hydraulic winch 990 kg * Li-ion battery power supply * pads for support feet * hydraulic FLY JIB Available in the selected color.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches Gusdpfxergzv Nj Af Tja * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 11441, At the moment we are working with the following version: 9.23.12.102733-12 The equipment of the K2: a 4-axis universal milling machine 2 drilling rigs Gusdpfxswvih Ae Af Tja a finger cutter below a slotter Hydraulic beam turning station Machine is fully working, can be visiited upon agreed time. avaible from 01/05/2026 Disassembly from our company and loading to truck, and is included in the price. Sale is as a used machine with exclusion of any warranty.

Condition: used, mileage: 206,000 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,000 kg, first registration: 04/2016, next inspection (TÜV): 02/2027, emission class: euro6, color: white, number of seats: 9, Year of construction: 2015, total length: 4,963 mm, total width: 2,050 mm, total height: 2,254 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, 2nd owner since 2018. German minibus. Only original 206,000 km. TÜV (roadworthiness certificate) valid until 02/2027. In 2025, €2,000 were invested in this Citroen Jumper, including: - Rear brakes NEW, parking brake partially new - Rear tyres NEW (all-season tyres) - Front tyres as-new (all-season tyres, DOT 17/2024) Last service in November 2024. Auxiliary heater (functions well). Air conditioning. 9 seats. Radio system. Central locking with remote key. ABS. ESP. Electric windows and exterior mirrors. Unladen weight: "2025-2293 kg" as per vehicle registration certificate. Gross vehicle weight rating: 3,000 kg. Standard registration as "vehicle for passenger transport up to 8 seats / multi-purpose vehicle". Original COC (Certificate of Conformity) document available. Euro 6 emissions standard. Guedpfxsv I Idbe Af Tsa 6-speed manual gearbox. The Citroen drives powerfully and very well. This offer is valid only for businesses, freelancers, farmers, forestry operations, and comparable legal entities. Sale to purely private individuals is strictly excluded. Subject to prior sale and errors at any time. Net price: €10,500. For export, we reserve the right to initially retain a deposit equal to the statutory 19% VAT until receipt of the final export confirmation (the export document or confirmation of arrival).

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Hundegger Speed Cut SC1 CNC 2005 vintage, in good technical condition, looking for a new owner. Excellent for the production of nailed sheet metal roofs. Gedpfx Aexftalef Teua Videos show the machine in operation.

Condition: excellent (used), mileage: 117,563 km, fuel type: diesel, color: red, lifting height: 36,500 mm, first registration: 05/2015, mast type: telescopic, Year of construction: 2015, = Additional Options and Accessories = - PTO = Further Information = General Information Intended use: Construction Technical Information Number of cylinders: 6 Engine displacement: 6,374 cc Drive: Wheel Dimensions (L x W): 1,103 x 255 cm Functional Mast length: 35.2 m Lifting capacity: 40,000 kg Body brand: TADANO ATF 40G-2 CE marking: yes Condition Technical condition: very good Optical condition: very good TADANO ATF 40G-2 CRANE UNDERCARRIAGE: 279 HP 4x4 drive 117,563 km Automatic transmission Air conditioning Refrigerator Tyre size: 445/95/R25 MERCEDES-BENZ OM 906 LA engine SUPERSTRUCTURE: Heating 3 RASIER wooden blocks 20T 1 RASIER wooden block 10T Min / Max boom length: 10.5 m / 35.2 m Max lifting capacity: 40,000 kg Maximum hook height: 36.5 m Full counterweight All documents and papers available CE certificate Godouxu Dyopfx Af Teua FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL