2019 KÖGEL SN 24 -SLIDING ROOF- COIL - SAF DISC.

KÖGEL SN 24 -SLIDING ROOF- COIL - SAF DISC.

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm Todpju Idkzefx Abuod total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Todpfjvpfzyex Abujd Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *

Condition: used, Technical details: throat: 510 mm number of strokes: 34 Hub/min height of stroke: 100 mm sheet thickness - max.: 16 mm round bar steel: Ø 60 (scheren) mm square edge steel: 60 (scheren) mm angle steel: 90°: 200x200x18 und 45°: 100x100x13 (scheren) mm flat steel: 750x20 und 400x30 (scheren) mm knife length: 765 mm total power requirement: 15 kW weight of the machine ca.: 5,1 t dimension machine approx.LxWxH: 2,4 x 1,2 x 2,0 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Punching: -Hold-down device -throat 510mm -Punching force 150t -Hole size max. Ø 40x28mm -Ø max. 165mm -max. punch holder Ø 31mm, currently installed punch Ø 25mm Notching: -max. sheet thickness 16mm -max. angle steel 120mm -Cutting depth x width: 110 x 58mm -Pipe notching device Ø 60mm Accessories: various dies and various punches and small punches (see photo) Tsdsxcay Hspfx Abuod *

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK Tedpfx Abekahu Rsued table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 40 mm throat 350 mm bore stroke 180 mm Tsdpoupxhisfx Abuod spindle taper MT 4 MK table: 560 x 560 mm column diameter 140 mm turning speeds 50 - 1450 U/min feeds 0,1 - 0,2 mm/U total power requirement 1,5 kW weight of the machine ca. 580 kg range L-W-H 2,27 x 0,7 x 1,1 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment

Condition: new, Year of construction: 2026, CORMAK Z5040L Column Drill Press The CORMAK Z5040L column drill press is an industrial metal drilling machine designed for intensive and precise operation in production plants and tool rooms. Equipped with an automatic spindle feed, tapping function, and a rotary tilting cube table, it enables efficient execution of the most demanding drilling and threading operations. This complete industrial drilling machine provides full adjustment flexibility and safe operation. Main advantages of the machine Automatic spindle feed – two feed rates (0.1 mm and 0.2 mm/rev) ensure stable and repeatable operation during deep drilling processes. Rotary tilting cube table – adjustable around the column and tiltable by ±45°, providing access to difficult-to-reach working surfaces at various angles. Tapping function – automatic spindle rotation change (right/left) enables fast and safe threading in steel (M22) and cast iron (M24). Wide spindle speed range – 18 speeds from 75–1450 rpm allow optimal machining parameters depending on the material and tool used. High structural rigidity – achieved through a large-diameter column and a massive base with 18 mm T-slots. Drilling depth indicator – provides precise control of hole depth. Standard cooling system – an independent 75 W pump improves drilling quality and protects tools against overheating. Construction and technology The CORMAK Z5040L column drill press has been designed with high stability, durability, and versatility in mind. The cast iron spindle head and column construction provide excellent vibration resistance, resulting in higher machining accuracy. The main worktable, measuring 560 × 520 mm, and the side table measuring 560 × 250 mm provide a large working area with the possibility of mounting various types of fixtures and machine vices. The large spindle stroke of 185 mm allows deep drilling without interrupting the machining process. Precision and work efficiency The CORMAK Z5040L drill press with automatic feed is designed for continuous operation while maintaining maximum accuracy. Thanks to the 18-speed gearbox, two automatic feed rates, and extensive angular adjustment options of the table, the operator can precisely adapt working parameters to the requirements of a specific workpiece. High-quality LED lighting enables accurate tool positioning even during complex machining operations. Standard equipment Angular cube table with T-slots Side table with mounting slots Cooling system with pump Tedpfx Aberidxxjued Automatic spindle feed LED work light Drilling depth indicator Technical specifications Parameter Value Maximum drilling diameter 40 mm Maximum tapping diameter (steel/cast iron) M22 / M24 Spindle stroke 185 mm Spindle taper MK4 Automatic feed range 0.1 / 0.2 mm/rev Spindle speed range 75–1450 rpm Number of speeds 18 Spindle-to-column distance 350 mm Maximum spindle-to-table distance 770 mm Maximum spindle-to-base distance 1215 mm Main table dimensions 560 × 520 mm Side table dimensions 560 × 250 mm Base dimensions 730 × 500 mm T-slot width 18 mm Motor power 1.5 kW Coolant pump power 75 W Overall dimensions 2230 × 560 × 850 mm Weight 510 kg

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 spindle turning speed - stepless 160 - 2250 U/min Center of spindle to wall or column 293 mm Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Tjdeyvvmropfx Abusd Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: used, mileage: 824,000 km, power: 222 kW (301.84 HP), first registration: 05/2017, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Additional information: * Maximum axle load | Second axle: 11500 kg * Payload: 12014 kg * Width: 2550 mm * Tire size | Second axle: 315/80 R22.5 * Wheelbase: 375 cm * Tire size | First axle: 385/65 R22.5 * Height: 3900 mm * Length: 5960 mm * Tire tread depth inner left | First axle: 80% * Tire tread depth inner right | First axle: 80% * Tire tread depth outer left | Second axle: 80% * Tire tread depth inner left | Second axle: 80% * Tire tread depth outer right | Second axle: 80% * Tire tread depth inner right | Second axle: 80% * Maximum axle load | First axle: 8000 kg * Type | First axle: Prometeon R * Type | Second axle: Prometeon R * Cab: Yes * Position | First axle: Front * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Steering | First axle: Yes * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Reduction | Second axle: Single reduction * Twin tires | Second axle: Yes * Driven | Second axle: Yes * Differential lock | Second axle: Yes Additional equipment: * 27 MC / CB * Adaptive cruise control * Aluminum fuel tank Tjdpfezkfc Nex Abujd * Anti-lock braking system * Anti-slip control * Automatic climate control * Hill start assist * Bluetooth * Differential lock * Double glazing * Double fuel tank * Electric windows * Electrically adjustable exterior mirrors * Electronic braking system (EBS) * ESP * Cruise control * Homepage * Air conditioning * Refrigerator * Air suspension * Air-suspended seats * Navigation system * Fog lights * Particulate filter * Radio/CD player * Retarder * Disc brakes * SemCollection * SemStars * Side skirts * Spoiler * Parking heater * Parking air conditioning * Xenon lighting * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about the costs and procedures for your respective country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: used, mileage: 1,022,000 km, power: 243 kW (330.39 HP), first registration: 12/2018, fuel type: diesel, overall weight: 19,500 kg, axle configuration: 2 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Additional information: * Payload: 11042 kg * Maximum axle load | Second axle: 11500 kg * Width: 2550 mm * Tire tread depth inner left | First axle: 30% * Tire tread depth inner right | First axle: 30% * Tire tread depth outer left | Second axle: 30% * Tire tread depth inner left | Second axle: 30% * Tire tread depth outer right | Second axle: 30% * Tire tread depth inner right | Second axle: 30% * Tire size | Second axle: 315/70 R22.5 * Wheelbase: 375 cm * Height: 3780 mm * Tire size | First axle: 385/65 R22.5 * Length: 5960 mm * Maximum axle load | First axle: 8000 kg * Type | First axle: Bridgestone R * Type | Second axle: Michelin R * Cabin: Yes * Position | First axle: Front * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Steering | First axle: Yes * Position | Second axle: Rear * Brand | Second axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Reduction | Second axle: Single reduction * Twin tires | Second axle: Yes * Driven | Second axle: Yes * Differential lock | Second axle: Yes Additional features: * Adaptive cruise control * Aluminum fuel tank * Trailer coupling * Anti-lock braking system (ABS) * Traction control * Automatic climate control * Bluetooth * Roof spoiler * Differential lock * Double glazing * Double fuel tank * Electric windows * Electronic Braking System (EBS) * ESP * Cruise control * Website * Air conditioning * Refrigerator * Air suspension * Air-suspended seats * Air horn * Metallic paint * Particulate filter * Radio/CD player * Retarder * SemCollection * Side skirts * Xenon headlights * Central locking Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We ask that you inquire in advance about the costs and procedures in your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Tjdpez Em R Iofx Abued Subject to changes, prior sale and errors.

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 The positioning table is unfortunately defective; otherwise, the machine is in good used condition. Specifications: Punching force            70 t Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm Tjdpfx Abewrkcyjued or Rectangular             50 in 8.0 mm or Rectangular             60 in 7.0 mm or Rectangular             70 in 6.0 mm Projection                     750 with -Foot switch