Used CHP unit

Köhler / Ziegler SY 050 GKT

Year of construction: 2024, condition: new, Universal testing machine H 5 TMNI (L) 250mm, extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm 1 working area up to nominal load: Working area width: 420 mm Max. testing stroke without testing tools, adapters, and central measuring device: 1270 mm Max. testing area height (between lower fixed and moving crosshead) without testing tools, adapters, and central measuring device: 1325 mm Travel speeds: Fgedpoiq Hxvsfx Al Soh Testing speed 0.001 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Measuring range depending on the force measuring sensor used, 0.4 - 100% of the nominal load, Class 1 (optionally Class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/- 160,000 and +/- 900,000 digits. The machine is supplied with a factory test certificate. If a factory or DAkkS calibration is to be performed at the installation site upon customer request, this effort must be calculated separately. Crosshead travel measurement: Incremental square-wave input with encoder monitoring, storage of the crosshead position Resolution of the crosshead travel measurement:

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 873 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,450 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, empty load weight: 7,850 kg, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 Fedpjvgh U Rsfx Al Ssgh Mast type: Duplex Technical condition: good Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Sideshift, 3rd valve, 4th valve, front working lights, heater, full cab, CE certificate, safety light,

Year of construction: 2025, condition: new, Complete compact vertical packaging system including auger dosing unit, screw conveyor and outfeed conveyor. Suitable for powdery products with a high or a low fluidity. The vertical packaging machine (VFFS) is equipped with PLC (control via color touchscreen user interface, different languages available e.g. English, German, etc.), date printer, automatic program set-up, mark sensor registration control, quick change former assembly, pneumatic sealing unit, servo motor film pulling, double pulling possible, air expeller/exhausting device (expels air from the bag before closing – vacuum is not generated), supporting device of finished bags, euro hole punching device, suitable for OPP and PE film (possibly additional costs for the PE unit). - Specifications of VFFS packaging machine: filling range: up to 5000ml; film width: max. 620mm; bag size (mm): min.-max. L(80-400)xW(180-300); max. speed of the machine in neutral: 45 cycles/min; stainless steel 304; 220V, 5kW; 6bar, 0.4m³/min; packaging machine dimensions LxWxH: approx. 1780x1850x1950mm; machine weight: 700kg. The auger dosing unit has a capacity up to 50l (hopper) and following specifications: filling range: 10-5000g; max. speed of the machine in neutral: 40 cycles/min; accuracy: ±0.3~1.5% (depending on product); 380V, 3kW; auger filler dimensions LxWxH: 600x1250x1200mm; weight: 220kg. Screw conveyor for automatic transport of powdery materials to the auger filler. The vibration motor assured an evenly product flow. Capacity of infeed hopper up to 150 l. - Specifications: Hopper, conveyor length and angle can be customized to meet individual customer requirements. Total dimension depends on it. Length of conveyor: 3~4m; stainless steel 304; conveying speed: : 3.0m³/h - 12.0m³/h; 380V, 0.8kW-4.1kW; weight: 130kg – 270kg. Deviations from specifications are possible. Supporting pole optional. The outfeed conveyor has a stainless steel 304 frame. - Specifications: conveying speed 30m/min; 220V, 0.55kW; conveyor dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Total dimensions of complete system approximately L2980xW3650xH2600mm, depending on final layout. Generally the system has to be customized to meet individual customer/product requirements. Therefore deviations of shown specifications of modules and machines are possible. Main components: Color touchscreen SIEMENS, PLC controller SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, film pulling motor SIEMENS. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Fodpfjv Nmk Ajx Al Sjgh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2024, functionality: fully functional, fuel type: diesel, color: white, power: 550 kW (747.79 HP), output voltage: 690 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 550 kW (747.79 HP), motor manufacturer: Caterpillar, type of cooling: water, 3x Lloyds Approved marine generator sets, brand new. All required Lloyds documentation available for class registration. Cat C32 generatorset / 550eKW / 690 Volt / IMO II Fgjdpfxjx Ec D To Al Sjh

Year of construction: 1999, condition: excellent (used), 600 KG 10 BAR Fjdpfxexy Ikbo Al Ssgh

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Fedpsxc Ni Rofx Al Segh

Year of construction: 2004, condition: good (used), A used, well-maintained double miter cold circular sawing machine from KASTO, model: “KASTOdisc A10” Fgjdpfxjkfvhks Al Soh - Fully automatic operation - Single cut - Hydraulic clamping cylinders - Central lubrication for saw guides - Coolant system - Documentation Saw blade diameter 350 mm Cutting range: Round 90°/45° 100/100 mm Square 90°/45° 100x100/100x100 mm Rectangle 90°/45° 170x100/130x100 Shortest remaining piece length in single cut at 90°: 30 mm Shortest remaining piece length in automatic operation at 90°: 260 mm Working height 950 mm Dimensions (W x D x H) 1530x1348x1890 mm Weight 980 kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 2,900 kg, input frequency: 50 Hz, nominal power: 1,250 kW (1,699.52 HP), One used oil transformer, TRANSFIX brand, with aluminum windings and ONAN cooling. 1250 kVA, 20,000 Volt / 20 kV. Manufactured in 1999, in excellent condition. Always available; please contact us for more information. Fjdozbyq Rjpfx Al Sjgh

Condition: used, Year of construction: 2004, Technical details: rated capacity: 60 kVA control: Modulsteuerung type of fuel: Biogas weight of the machine ca.: 1,9 t dimensions L x W x H: 2,9 x 1,4 x 1,9 m output: 55 KW Functionality unknown. The generator is sold as a spare part donor at a very reasonable price! Fgodpfx Alju Nvcle Ssh Ambient temperature 221°F / 105° C Operation via control panel on the control cabinet door. Base frame is a steel construction on which the generator is mounted. Hour counter digital Engine: -4-cylinder; Liebherr type G 924 TI, turbo with intercooling; speed 1,500 rpm. Generator: -VEM Motors; 400 V / 690 V, speed 1,555 rpm; power max. 75 hp / 55 kW. Gas mixer: -RMG Regel- Messtechnik GmbH; type RMG 983-100/50 *

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors Fodpfon Hwl Aox Al Sogh with chain bed Technical specification: Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis