Automatic Die Cutter

Kama TS 74-60 Automatic Die Cutter

Condition: good (used), Year of construction: 1997, Heidelberg SM74-2 Year: 1997 Configuration: 2 Colors – Straight Njdjxxaa Espfx Ad Howp Max Sheet Size: 520 × 720 mm Max Plate Cylinder prinitng 460 × 660 mm Condition: Clean, well-maintained Machine Specifications CP-Tronic Alcolor film dampening Technotrans cooling unit Autoplate (automatic plate changing) Ink roller washing device Blanket washing device Suction tape feeder Puncher & bender Grafix Alphatronic dry sprayer Included with the Machine Complete set of rollers Standard tools Manuals (digital or printed) Test print available before dismantling

Condition: ready for operation (used), Year of construction: 1995, Heidelberg SM 74-2 L Nwsdjxtf Ahspfx Ad Hep Year 1995 Straight 95 mil CPC 1.04 Alcolor Autoplate Autowash Non Stop Feeder IR Dryer hor air still in printing

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device Nwsdpfx Adjwypp Ie Hep - Tab insertion device

Condition: good (used), Year of construction: 2010, Herzog Heymann M7.32 Min. folding length: 25 mm Max. working width: 52 cm 12 folding pockets Noise protection Double rear knife shafts Transfer unit 2nd station Herzog Heymann M7.40 Min. folding length: 30 mm Nedpfxjwtp Hto Ad Howp Max. working width: 52 cm 6 folding pockets 1 altar folding pocket with control unit Noise protection Height adjustment via spindles

Year of construction: 2021, condition: ready for operation (used), Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible. Nwsdpfx Adjw Tc R Ro Hop

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 620130, color channels: 2, paper width (min.): 520 mm, paper width (max.): 740 mm, HEIDELBERG SM74-2+ Year 1994 Serial number: 620.130 92 million impressions Sheet-fed offset press – 2-color, low-pile delivery Straight printing configuration Sheet size: 20 x 28 inches (520 x 740 mm) Technical specifications: – Maximum speed: 15,000 sheets/hour – Maximum sheet size: 520 x 740 mm – Minimum sheet size: 210 x 280 mm – Maximum substrate thickness: 0.04–0.6 mm – Maximum print area: 510 x 740 mm – Plate size: 605 x 745 mm, 0.30 mm thick – Blanket size: 616 x 772 mm, 1.90 mm thick Machine dimensions: – Length: 3.6 m – Width: 2.8 m – Height: 1.9 m – Power requirement: approx. 29 kW – Weight: approx. 9,150 kg Included equipment and accessories: – Stream feeder – Double sheet detector – electric – Electronic side lay control – Alcolor continuous dampening with chiller – Cooling and recirculation unit – CPTronic: Digital machine control and diagnostics with axial, circumferential, and diagonal register controls – Autoplate: semi-automatic plate change – Automatic blanket washing device – Automatic impression cylinder washing device – Automatic ink roller washing device – Preset feeder (automatic paper size adjustment) – Chromed impression cylinders – Chromed plate cylinders – Grafix powder spray unit – Plus version (prepared for numbering unit) – Oil drip tray, tools, documentation – Complete with all standard parts and accessories Nwedpoxznmfofx Ad Hsp Condition: No damage to cylinders or gears Availability: Immediate Inspection: Machine can be demonstrated under power

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station still in production available immediately Sheet size, max. 760 x 600 mm Nsdpsxzvamjfx Ad Hjwp Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: "Machine under power" _____ Nwjdpfxjxzr Hpo Ad Hsp Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)