Aligner

Kolle

Condition: used, Year of construction: 1993, Working width: 630 mm Planing height: 220 mm Cutterhead: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: digital display Feed speed: 4 / 6 / 12 m/min Infeed roller: steel, segmented Outfeed roller: rubber Table rollers: yes Motor power: 7.5 kW Bjdpfxoyxgaho Al Ielg Extraction port: 160 mm Machine length: 1200 mm Machine width: 1000 mm Weight: 1000 kg

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Voltage: 230 Volt Bedob Auu Ropfx Al Ijlg 5 amps, 50 Hz, Machine no.: 4/14242 Dust bag Location: Ex warehouse Bitburg

Condition: used, Year of construction: 1993, Working width: 500 mm Cutter block: Leitz - Centrofix Number of knives: 4 Surfacing table length: 2800 mm Surfacing table adjustment: Lever Chip removal display: Scale Adjustable fence angle: Yes Motor power: 5.5 kW Machine length: 2800 mm Machine width: 1000 mm Bjdpfx Asyhgiael Ijlg Weight: 900 kg

Condition: used, functionality: fully functional, Thickness planer HDA 63 - 630 mm planing width - 230 mm planing height Bljdox Htbzopfx Al Iog - Table length: 1200 mm - 5.5 kW - Weight: 100 kg - 2 feed speeds - Dial gauge for height adjustment - Digital display at the mitre fence - 4-knife cutterhead - Rubber outfeed roller - Steel infeed roller - Width: 1100 mm The outfeed of the cutterhead (1050 x 1230 mm) can be electrically braked. Transport available at extra cost!

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm Bljdpehlp D Njfx Al Isg -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Tilting Spindle Moulder KÖLLE F45 with power feed and integral fence Very good condition; the machine comes from a small model making workshop and has only seen light use. Everything works perfectly. All bearings and guides are in proper condition; the machine runs extremely smoothly. Year of manufacture: 1992 The moulder fence features one adjustable jaw with fine adjustment and scale, enabling jointing operations such as for gluing profiles. The entire fence can also be accurately and quickly adjusted in depth via a handwheel and leadscrew, with the milling depth displayed digitally. Spindle locking by lever. The machine is equipped with an eye-level control panel. Fitted with AIGNER integral fence. Efficient chip extraction with two extraction ports (125 mm and 100 mm). Equipped with a 30 mm spindle, continuously tiltable from -5 to 45°, tilting is electrically operated; for fine adjustment, there is a handwheel and digital readout. A 40 mm spindle can also be installed. Reverse/forward rotation capability. Nationwide personal delivery and demonstration within Germany for €220, eliminating all risk on purchase. Shipping to Austria and other EU countries available on request. Large table opening, adjustable by multiple insert rings (enabling use of both large and small diameter cutters with optimal safety). Spindle speeds: 3000, 4000, 5000, 6000, 8000, and 10,000 rpm. Spindle height adjustment is also electric, with fine adjustment via handwheel and digital readout. Includes 2200 mm long extendable auxiliary support. Very robust and durable construction, built for heavy-duty milling tasks and suitable for all routing operations. Optimal power transmission via belt drive system. Supplied with operating manual. Includes 4-roller HAFFNER power feed, model 904. The feed unit features forward/reverse operation and 4 speeds, with individually mounted feed rollers. Bedpfxjy Hxtps Al Ielg Machine table is 1200 mm wide and 1000 mm deep, with 500 mm table extensions on both left and right sides. Ready to use immediately. 380V, 6000 and 8600W motor thanks to two speed ranges; fitted with a heavy-duty motor. Comes with all necessary safety features, including motor brake and emergency stop. The machine is certified by the Woodworkers' Professional Association and carries the GS tested safety mark. Weight: approx. 1000 kg Fitted with motor overload protection. Professional-grade machine, not DIY store quality. Optimal, simple, fast, and safe handling.

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Table height: 850 mm Swivel range: -5° to +45° Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 120 mm Tool holder: MK5 incl. integral fence Weight: approx. 1000 kg Storage location: Nattheim Bodpfxsx It Aus Al Ijlg

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine Blsdsh Nvyzspfx Al Ieg -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: used, Year of construction: 1984, used, in good condition Cleaned Function-tested Test run Manufacturer: Kölle Model: L2 Year of manufacture: 1984 Machine no.: 1788 Motor: 1.5 kW 2-lever operation Chuck runout max. 8/100 mm Table size: 520 x 290 mm Drill chuck: 20 mm Dowel drilling unit with 4 stops: 16, 22, 25, 32 mm Bsdpfx Asy Apfnsl Ijlg Workpiece stop Digital height adjustment display Required space approx. 1000 x 1200 x 1300 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition as inspected, function-tested without refurbishment, without warranty or guarantee

Condition: excellent (used), functionality: fully functional, Panel saw KFS40 Blodst Ecabjpfx Al Iog Upper extraction Rear roller table 1250 mm to the right of the blade Tiltable 45° Table 2600 mm Transport available at extra cost!

Condition: used, Year of construction: 1995, Swivel spindle: Yes -5 to 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling jaw adjustment: manual Height display: mech. counter Bsdpfx Alouzkwzj Islg Swivel angle display: mech. counter Milling stop display: mech. counter Milling spindle diameter: 30mm / new milling spindle Speeds: 3000, 4500, 6000, 9000 Motor power: 5.5 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2000mm Machine depth: 1400mm weight: 900kg

Condition: good (used), Slot Mortising Machine L2 - Year of manufacture: 1977 - Weight approx. 220 kg - Overall dimensions approx. 1,120 x 880 x 1,120 mm (W x D x H) - Table height approx. 980 mm - Table size approx. 820 x 350 mm - Power consumption 3.2 A / 3-phase power connection - Drilling depth approx. 150 mm - Drilling length approx. 200 mm - Max. drilling height approx. 120 mm - Drill chuck approx. 3–20 mm Bljdpfx Ajywnuwjl Iog

Condition: used, Year of construction: 1992, hollow 770 mm 450 mm 800 mm Table dimensions 900 x 900 mm table height 1000 mm Table tiltable 15 Grad cutting speed 2500 - 3600 m/min sawblade width 35 mm sawblade length 5450 - 5600 mm Bedpeyv I Rpsfx Al Iolg weight of the machine ca. 1250 kg dimensions 1900 x 1200 x 2470 mm

Condition: reconditioned (used), machine/vehicle number: 591, functionality: fully functional, Motor power 4kW table size 800 x 800 mm spindle Ø 30 mm suction nozzle 120 mm Handwheel height adjustment Bljdpoiw D Uhefx Al Ieg fence jaws individually adjustable right/left rotation speeds 3/4/6/9000 rpm no brake

Condition: good (used), Year of construction: 1977, functionality: fully functional, Table milling machine Type F - Year of manufacture: 1977 - 3, 4, 5, 6, 8, 10,000 rpm - Right-/left-handed rotation - Milling spindle 30 mm - Clamping length 140 mm - Wooden-jaw fence with fine adjustment, rotatable Blsdpsx E Dctofx Al Iog - Table size: 1200 x 800 mm - Weight: 700 kg - With Holz Her 3-roller feed unit - Margin scheme taxed Shipping available at extra cost!