Wheel loader

KOMATSU Radlader WA 80 - 6 Radlader

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Variable speed, (inverter) Kfedpst Hdh Nefx Ah Uja With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Condition: used, functionality: fully functional, fuel type: diesel, overall weight: 11,000 kg, Year of construction: 1980, operating hours: 28,000 h, All-wheel drive Kfedpfx Aji Tmhljh Uea

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle Kfsdpsk Egrpsfx Ah Uja - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: good (used), functionality: fully functional, power: 201 kW (273.28 HP), fuel type: diesel, color: yellow, overall weight: 26,300 kg, machine/vehicle number: 63X1784, Equipment: cabin, hydraulics, Product Description Kodpfx Ahoum Ebqe Uefa Used Wheel Loader Machine Manufactured by Caterpillar Model CAT 980C Operates on Diesel Engine Machine sold as its condition VIJAY JPN Industrial Trading Pte Ltd 13A pandan crescent, Singapore 128478

Condition: new, Year of construction: 2025, machine/vehicle number: 988906827, fully mobile concrete fuel station Frumecar Fastmix * THE STRESSED GAS STATION * - Year of construction: New - 2-4 chambers with 7-14 m³ capacity - capacity: 14-25 m³-h depending on mixer size - mixer size: 0,5 m³ - 0,75 m³ -1,0 m³ - Concrete software from Siemens with self-service terminal and new barcode method and EC card terminal - concrete discharge conveyor 9m length - Cement silo 32 to. incl. cement screw conveyor - installation, commissioning and training incl. - 2 years warranty - Highest quality plant on the market. All components produced in produced. Electric motors and gearboxes from Siemens installed. Other plant components from the market leader VAM. Input errors and mistakes in this offer are expressly reserved. Only the specific agreements in the order confirmation or in the purchase contract are decisive. more construction machines and mixing plants on our website Ksdpfohd I Smjx Ah Uofa Further information Purpose: construction, Usable material: concrete, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: used, mileage: 247,575 km, power: 77 kW (104.69 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 2,248 kg, maximum load weight: 551 kg, overall weight: 2,799 kg, next inspection (TÜV): 01/2025, fuel: diesel, CO₂ emissions: 172 g/km, fuel consumption (urban): 7.3 l/100km, fuel consumption (extra-urban): 6.1 l/100km, fuel consumption (combined): 6.5 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 5,120 mm, Year of construction: 2016, construction height: 1,980 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, trailer coupling, AdBlue system malfunction. The Ford Transit Custom 290 2.0 TDCi is a reliable used car, ideal for business people. It was first registered in November 2016 and has a mileage of 247,575 km. With a powerful 2.0-liter diesel engine and an output of 77 kW (105 hp), it offers efficient performance and meets the Euro 5 emissions standard. The vehicle is equipped with a manual transmission and has an average consumption of 6.5 l/100 km. The panel van model is characterized by practical equipment features, including air conditioning, cruise control, trailer hitch (AHK) and workshop fittings. Driver and passenger airbags as well as modern assistance systems such as the hill start assist ensure safety. Additional features such as an on-board computer, parking pilot system front and rear, and adjustable steering column increase driving comfort. The rear wing doors with a 180 degree opening angle and a sliding door allow for flexible loading options. The vehicle is in good condition, but the AdBlue system has a fault. The loading volume is optimized by a high partition. Other highlights include the medium-high roof variant, tinted glazing and an extensive interior filter. The dimensions are 5,120 mm in length, 2,032 mm in width and 1,982 mm in height. With a green environmental sticker, the Transit can be used in many environmental zones. Special equipment: Airbag on passenger side, vehicle without vinyl floor covering in the loading/passenger compartment, rear wing doors with glazing (opening angle 180 degrees), tailgate without glazing, high loading compartment partition behind driver and passenger, with window and through-loading option below, parking pilot system front and rear, visibility package 1 Other equipment: Airbag on driver side, traction control (ASR), basic, indicator light integrated in exterior mirror, on-board computer, electric brake force distribution (EBD), driver assistance system: hill start assist, interior filter: pollen filter, body/structure: high-space box, body variant: medium-high roof, steering column (steering wheel) adjustable in height/length, truck registration, engine 2.0 liter - 77 kW TDCi KAT, radio preparation, 4 speakers, wheelbase 2933 mm, spare wheel in driving tires, low emissions according to Euro 6 emission standard, headlights H4, sliding door in the loading/passenger compartment on the right, mud flaps at the front and rear, side protection strips, bumpers partially painted, tinted glazing, paneling in the loading/FG compartment: half-high, lashing rails on the side of the loading compartment Kedpfx Ahstyz D Ns Usfa Equipment was determined using a VIN query, errors can occur here for technical reasons COC is available Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: excellent (used), Year of construction: 2004, winch inkl. lifting capacity max. 2t. auf 2,7 Meter lifting capacity max. 1 Tonne auf 5,3 Mete Kedpfx Aheq N E U Ao Ujfa Number of working hours 270 h electrical ja

Condition: used, Year of construction: 2022, operating hours: 550 h, Lightly used and well-maintained Komatsu PC 20 R-5 mini excavator Technical data: * Operating weight incl. attachments approx. 2,000 kg * Komatsu 3D67E-2A engine with 11.8 kW * Overall length: 3,845 mm * Overall height: 2,370 mm * Overall width (minimum): 1,280 mm (990 mm) * Track width: 230 mm * Tail swing radius: 1,120 mm * Track length: 1,570 mm * Max. digging reach: 4,100 mm * Max. digging depth: 2,370 mm * Minimum swing radius: 1,515 mm Equipment included: * 2 travel speeds with auto shift-down * Servo control * Long dipper arm * 2-way auxiliary hydraulics to the boom (switchable for hammer operation) * Protective cover on the boom lift cylinder * Work light on the boom * Dozer blade * Travel alarm (acoustic) * Tool kit * CE conformity * Cab with heater * 1x standard hydraulic circuit (with pedal) * Suspension driver's seat with fixed 2-point safety belt * Rubber tracks * Mechanical quick coupler LEHNHOFF MS01 + load hook Other: * Attachments are NOT included - sale on request Kfodpfjrwvvyox Ah Usa

Condition: used, Year of construction: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line. The equipment comes with a 2-year warranty (in single-shift operation) and all components of the equipment can be purchased separately.  Technical details Capacity: 9000 containers/h (varies according to bottle volume and product).  Container  Max. Diameter: 100mm  Max. Height: 300mm  Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally wired with attached control cabinet in mild steel, painted Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 Combined filling and closing machine (block machine) | ALWID | SUPERIOR-16MDM-5SK Fully automatic rotary filler Filling system: mass flowmeter system, type: Endress+Hauser LPG MASS Number of filling stations: 16 filling stations Filling valve diameter: Ø12mm Max. tank dimensions: height: 50-300 mm, Ø: 20-100 mm Fully automatic round capper Number of capping heads: 5 With torque adjustment via slip clutches With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator With inside drop switch to switch off the machine in case of missing closures Checkweigher | ALWID | OCS-HC-M-2000-1 Applied safety and machinery directives CE compliant Industrial load cell with stainless steel housing based on the principle of electromagnetic force compensation Force shunt free current transfer at the load cell Front protection to reduce interference on the weighing result Stainless steel control cabinet Graphics-capable color TFT touch screen, 10.4 inch, VGA resolution Flexible operability due to tiltable stainless steel operator terminal Freely configurable user interface with simple, intuitive operation Inkjet Printer | Domino | Ax350i  Fast printing of text and multi-line codes at high speeds  Labeler | ALWID | SES-120-III Tandem design Max. Label height: 120mm  Photocell for label scanning 2 x automatic winding station incl. counter pressure plate Mounting device with height adjustment for lateral label dispensers With adjustable side guides - passage width up to 150mm Kedpfx Ahomfqm Ds Usfa

Year of construction: 1982, condition: used, In Good Condition Kodedq Ug Iepfx Ah Uefa