Tanker semitrailer

Kotte / Garant 30m³ Gülletankauflieger/Gelenkt

Condition: used, maximum load weight: 31,420 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, loading space volume: 34 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Trailer STC 34 Code L4BH, for chemicals First registration 05/2023 Tedpfex Rtafex Abusd German registration, from first owner Ø Unladen weight approx. 7,580 kg Ø Stainless steel chassis, highly polished Ø BPW axles with large disc brakes, 430 mm Ø 1st axle: LIFT AXLE Ø Crank-operated support legs, steel, for full load Ø 6 tires, size 385/65 R 22.5 Ø Aluminum rims ALCOA Dura-Bright, high-gloss Ø WABCO trailer EBS with RSS anti-roll protection Ø Tank: 34,000 liters, stainless steel 1.4571 AISI 316 Ti Ø Operating pressure: 3.0 bar / Test pressure: 4.0 bar Ø Insulation: 100 mm glass wool Ø 1 compartment with 4 bulkheads Ø 5 manholes, 3x DN500 and 2x DN350 Ø 1 vent valve, Fort Vale Ø 1 safety valve Ø 1 check valve Ø Air line on the right side, DN 50, with TW 50 connection at the front right Ø Heating preparation, 4-channel hot water Ø 1 outlet, DN 100, uninsulated, with sampling tap at the rear right and TW 80 coupling Ø 1 purge device Ø Pneumatic bottom valve Ø Hoses on the left and right, DN 150, approx. 6 m long RENTING is the new BUYING, also available with us in a full-service rental arrangement.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,135 h, load capacity: 4,000 kg, lifting height: 9,600 mm, free lift: 9,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,390 mm, power: 100 kW (135.96 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 9,300 kg, total length: 5,170 mm, drive type: Diesel, construction width: 2,390 mm, Telescopic forklift, rigid frame Load center: 500 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Speed class: 40 Condition: Ready for use and fully functional Technical condition: good Tjdpfxsz Am A Is Abusd Front tire type: Pneumatic Front tire size: 460/70R24 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 460/70R24 Rear tire condition: 40 - 60% Battery voltage: 24V Battery type: Starter Battery year of manufacture: 2018 Battery condition: 40 - 60% 3-point hitch, rear work light, front work light, heater, compliant with German Road Traffic Licensing Regulations (STVZO), full cabin, air conditioning, full free lift, CE certificate, joystick, rotating beacon, seat

Year of construction: 2025, operating hours: 210 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VAUZ1973KZT03151, Liebherr Telescopic Handler T 33-10, Generation 6 For sale is a Liebherr telescopic handler T 33-10, originally owned, acquired as new from an authorized Liebherr dealer. Used exclusively in biogas and substrate logistics. Maintenance performed according to manufacturer specifications throughout, records available. ENGINE AND DRIVE - Deutz TCD 3.6 L4, 4-cylinder inline engine, water-cooled, turbocharger with intercooler - 105 kW / 143 hp, 3.6 l displacement, 500 Nm at 1,600 rpm - Emission stage EU V / Tier 4f, electronic common rail fuel injection - Hydrostatic closed-loop drive, infinitely variable - Permanent all-wheel drive, 45% limited-slip differential in the front axle - 3 electronically adjustable steering modes, full lock in 3.5 turns - 20 km/h, 41 kN traction force, reversible fan drive LIFTING AND WORKING HYDRAULICS - Max. load capacity 3,300 kg, lifting height 9,747 mm, reach 7,176 mm - Load capacity at max. lifting height 1,500 kg, at max. reach 300 kg - Working hydraulics 106 l/min, single-lever control via multi-function joystick - Lowering brake valves on lifting, tilting, and telescopic cylinders - Auxiliary work circuit on the telescopic head, adjustable flow rate - Hydraulic quick hitch Liebherr Compact and Stereo - Tilting kinematics 126.4°, telescopic cylinder with end-of-stroke damping CABIN - Elastomer mounting, integrated ROPS/FOPS structure internally - Tinted safety glazing front and roof, one-piece windshield wiper - Windshield washer system front and rear, rear window tilting - Driver's door with opening window, lockable when open - 3-stage fan with fresh air intake and filter - Steering column tilt adjustable via foot pedal, driver's seat with artificial leather upholstery SAFETY AND EQUIPMENT - Overload warning device EN 15000 with automatic shut-off, audible/visual Tsdpfjz Hx Rcex Abued - Hill start assist Auto Hill Assist, level adjustment via the front axle - Battery main switch with automatic battery disconnection - Air filter with automatic dust extraction - Central lubrication system, tool-free access to telescopic cylinder lubrication - Work spotlights 2x front, 2x rear, display matrix - Liebherr hydraulic oil HVI (-20 to +40 °C) - Tires Firestone Duraforce-Utility 460/70 R24 INCLUDED ACCESSORIES All attachments fit the hydraulic Liebherr quick hitch and were acquired new along with the machine. - Pallet forks detachable - Fixed pallet fork, load capacity 3.6 t, fork length 1,200 mm - Light goods bucket LSB 3.0 m³, width 2,500 mm, undercutting blade, overflow guard, wear strip hardened steel 400 HB (bulk density max. 0.2 t/m³) - Lattice boom extension 3.9 m - Front sweeper FKM 2.4, working width 2,500 mm, mounting plate CAT 2, hydraulic dirt collection container, splash guard, parallelogram mounting system with pivot joint, mechanical adjustment via locking lever, height adjustment via fine-step locking system, polypropylene sweeping roller also suitable for snow removal, 3 heavy-duty swivel rollers, support legs, lashing eyes TRANSPORT DIMENSIONS Length 5,104 mm, width 2,327 mm, height 2,465 mm, operating weight 8,050 kg SCOPE OF DELIVERY Operating manual digital (MyLiebherr) and printed in German, emergency kit, lifting cylinder support, complete maintenance history Inspection by appointment. Sale from commercial to commercial, price net plus statutory VAT. Transport can be arranged upon request.

Condition: new, machine/vehicle number: CAT00C13JDH404550, fuel type: diesel, motor manufacturer: Caterpillar C13, General information Year of manufacture: 2025 Field of application: Construction Weights Empty weight: 4.667 kg Functional Todowzgxcjpfx Abued Generator capacity: 450 kVA Dimensions of cargo space: 493 x 162 x 222 cm CE mark: yes Other information Fuel consumption: 69.9 Liter / Hour at 75% Load Generator: Caterpillar A2955L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 842 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 4,000 kg, lifting height: 9,100 mm, fuel type: diesel, mast type: telescopic, construction height: 2,380 mm, power: 100 kW (135.96 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 8,440 kg, total length: 5,120 mm, drive type: Diesel, construction width: 2,390 mm, Telescopic forklift, rigid Load center: 500 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Speed class: 40 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 460/70 R24 159A8 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 460/70 R24 159A8 Rear tire condition: 80 - 100% Tedpfx Abezyxcnoued Battery voltage: 12V Battery type: Starter Battery year of manufacture: 2026 Battery condition: 80 - 100% 3rd valve, rear work light, front work light, heater, soot filter, full cabin, air conditioning, full free lift, CE certificate, LED, seat Equipment: Classic

Condition: used, empty load weight: 11,860 kg, maximum load weight: 22,140 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 07/2008, next inspection (TÜV): 07/2026, suspension: air, tire size: 385/65R22.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, 1st axle liftable, last axle steering, ABS (anti-lock braking system), catwalk, side underrun protection, supports, storage box, rotating beacon, rear discharge. Superstructure: Suction and pressure tank semi-trailer with 1 compartment approx. 26,000 l with ADR (FL/AT), 3x 9t BPW axles, disc brakes, 1st axle liftable, 3rd axle steered! Next tank inspection: 07/2026! Leakage and functional test valid until 07/2029! Tedpfx Abjy Twmbeujd Accessory information without guarantee. Subject to change, prior sale and errors excepted!

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2004, next inspection (TÜV): 02/2027, loading space volume: 39 m³, Year of construction: 2004, Equipment: ABS, ALSO AVAILABLE AS A COMPLETE ROAD TRAIN!! AT EXTRA COST!! Stock no. 5771 36,000 L AP slurry tank body with HFR swap chassis / hydraulic arm with 3 knuckle joints / 10,000 L centrifugal pump / rear steering axle ---- * Manufacturer: Schwarzmüller chassis with AP tank * Type: Slurry tanker semi-trailer * First registration of chassis: 11/2004 * Year of tank construction: 2006 * Gross vehicle weight: 39,000 kg * Axles: 3 x BPW with 1st axle as lift axle / 3rd axle rear steering / drum brakes * Suspension: Air suspension with raise and lower function * Tyres: 385/65 R 22.5 approx. 50% tread * Colour: Chassis and tank body black-grey * EBS * AP slurry tank body, year: 2006 * 3-fold articulated hydraulic arm for loading/unloading with camera and 10,000 L centrifugal pump * Radio remote control * 6,000 L centrifugal pump at the rear for application * Reversing camera * Fill level indicator front left * Service hatch front left * Docking funnel at rear * Individual mudguards * Full-length support legs * LED work lights * LED reversing lights German papers!! ALSO AVAILABLE AS COMPLETE ROAD TRAIN!! AT EXTRA COST!! Stock no. 5770 Scania R480 with dual-circuit hydraulics / adjustable fifth wheel coupling / 6x2 / full fairing / Topline Tedpfoywq N Rox Abusd ---- Manufacturer: Scania Model: R480 First registration: 09/2007 Mileage: approx. 1,208,916 km Transmission: Automatic Gross vehicle weight: 26,000 kg Unladen weight (registration): 8,630 kg Axles: 6x2 with 3rd axle as lift axle Wheelbase: approx. 3.10 m Suspension: Air suspension front and rear Tyres: 1st axle 385/65 R 22.5, 2nd axle 315/70 R 22.5, 3rd axle 385/55 R 22.5 Cab: Topline / 2 bunks Colour: Blue TÜV valid until: 02/2027 ABS Dual-circuit hydraulics Adjustable fifth wheel Roof spoiler Side spoilers Chassis fairing LED work lights in entry steps LED work lights on rear upper cab Beacons Sun visor Electric roof hatch Automatic climate control Auxiliary heater Refrigerator Electric windows and mirrors Heated mirrors Multifunction steering wheel Differential lock Cruise control CD radio German vehicle!! German papers!! Note on possible errors in this advertisement: Despite careful preparation, errors or inaccuracies may occasionally occur in the text or details. We do not accept liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or clarify any questions.

Condition: used, maximum load weight: 33,450 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2024, Equipment: ABS, 3-axle tank semi-trailer KÄSSBOHRER, type STC 28/1-10/24 First registration 04/2024, German semi-trailer, first owner Mileage only 52,629 km Permissible total weight 39,000 kg Permissible saddle load 12,000 kg Unladen weight approx. 5,550 kg Wheelbase approx. 5,900 mm Saddle height approx. 1,200 mm Tank semi-trailer made of V2A stainless steel, material 1.4301 Insulation 100 mm Volume 28 cbm, with 2 baffle plates Discharge via outlet with butterfly valve, ending in the rear compartment 1 x filling dome/manhole DN 500, walkway around the dome Fixed access ladder, on the right side of the tank Aluminum short chassis Mechanical landing gears JOST, 24 tons Tjdpfjzbwy Nsx Abusd Wabco Trailer-EBS-E Type 4S/2M with RSS anti-roll protection BPW axles with disc brakes Tires 6 x 385/65 R 22.5, tread depth 10 to 12 mm Aluminum rims, polished 1st and 3rd axles are lift axles Access ladder on the right side of the tank with APOLLO pump, type Magnum L, self-priming centrifugal pump 3" in the rear compartment. Due to the special design of the Magnum centrifugal pump, the pump can also draw in a gas/liquid mixture. For the transport of liquid fertilizers, pesticides, urea, AHL, whey, etc. Pressure Hmax: 0-3 bar Flow rate Qmax 500 - 1000 liters/min. Free-fall connection RENTING is the new BUYING, with us, full-service rental is also IMMEDIATELY available.

Condition: new, Wilo dry-running pump IPN50/180-7.5/2 AT, DN50 PN 16, Art. 307833 /2120882 - Wilo dry-running pump - IPN50/180-7.5/2 AT - DN50 PN 16 - 7.5 kW - max. 140°C - 2900 rpm - Art. 307833 /2120882 The data listed below is identical to that of our previous model. Ordering information Manufacturer: Wilo Product designation: CronoLine-IL 50/180-7.5/2 Net weight approx. 106 kg Article number: 2120882 Operating data Fluid conveyed: Water Fluid temperature T: -20 °C Ambient temperature T: -15 °C Maximum operating pressure PN: 16 bar Design note: 16 bar up to 120°C, 13 bar up to 140°C Minimum Efficiency Index (MEI): 0.4 Hydraulic data Minimum Efficiency Index (MEI): 0.4 Max. operating pressure p: 16 bar Maximum operating pressure PN: 16 bar Min. fluid temperature Tmin: -20 °C Max. fluid temperature Tmax: 140 °C Max. ambient temperature Tmax: 40 °C Design note: 16 bar up to 120°C, 13 bar up to 140°C Motor data Mains connection: 3~400 V, 50 Hz Voltage tolerance: ±10% Motor efficiency class: IE3 Motor rated power P2: 7.50 kW Rated current IN: 13.30 A Rated speed n: 2900 1/min Power factor cos φ: 0.90 Tsdpfxoivdz Ne Abuod Motor efficiency ηM at 50% load: 88.9% Motor efficiency ηM at 75% load: 90.3% Motor efficiency ηM at 100% load: 90.1% Motor winding up to 3 kW: - Motor winding from 4 kW: - Insulation class: F Motor protection: IP55 Motor protection: no Materials Pump housing: 5.1301/EN-GJL-250, KTL-coated Impeller: EN-GJL-200 (GG-20) cast iron Shaft: stainless steel Mechanical seal: AQ1EGG Lantern: 5.1301/EN-GJL-250, KTL-coated Condition: "New". Pumps from stock. Some may be without the original packaging. May have dirt or storage marks/minor dents. They appear unused when looking at the drill holes. There are no mounting marks. See pictures. Shipping via special/parcel/freight transport. P4 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: new, maximum load weight: 28,900 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, Year of construction: 2026, Equipment: ABS, FOR SALE, FOR RENT, AND AVAILABLE FOR LEASE WITH OPTION TO PURCHASE!! Schwarte Jansky 30m³ V2A slurry tank semi-trailer / Steered trailing axle / Börger pump ----* Manufacturer: Schwarte Jansky * Type: Agrarliner * Color: Body V2A natural, chassis MB 7350 Novagrau * Volume: 30m³ / Ø 2.10m / 1 chamber * Tare weight according to vehicle registration: 6,100 kg * Gross vehicle weight: 35,000 kg * Payload: 28,900 kg * Axles: 3x SAF axles / 1st axle liftable + starting aid / Steered trailing axle * Tires: 385/65 R22.5 / Disc brakes * Suspension: Air suspension with raising and lowering function * EBS Wabco * Saddle height 1,200 mm * Börger rotary lobe pump FL 1036 * Output: 6m³/minute * 1x dome cover with dome tray * Tank ventilation with pneumatic slide valve * 1x brass vacuum safety valve DN80 * 1x brass overpressure safety valve DN65 * 1x collection tray with approximately 150 liter volume * 1x tank outlet at the rear with pneumatic slide valve DN200 * 1x free outlet with pneumatic slide valve DN200 * 1x flushing line DN150 is mounted along the entire tank length and has one outlet in front of each baffle, with pneumatic slide valve * 1x rear docking funnel with pneumatic slide valve DN200 * Overfill protection with automatic shut-off * 1x 6.00m hose tray on the left * 1x control box at the rear left + remote control * 1x stainless steel toolbox on the left * 1x aluminum ladder * Individual fenders Tjdpoz Sigbofx Abued * Outrigger supports for full load * 1x LED work light on the left * 1x LED work light on the right * Additional LED reversing lights FOR SALE, FOR RENT, AND AVAILABLE FOR LEASE WITH OPTION TO PURCHASE!!