Swap body semitrailer

KRONE 3-Achs-Containerchassis 20'

Condition: used, maximum load weight: 37,570 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 07/2026, total width: 2,420 mm, Year of construction: 2019, Equipment: ABS, You can find our complete vehicle inventory, including all vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Chassis: * Double-T longitudinal beams welded with cross members, front frame height approx. 147 mm (including kingpin plate) * 'Compact-Rear' chassis design * Exchangeable 2-inch kingpin, 1 position, front overhang approx. 570 mm * Container rails in rectangular tube, approx. 200 x 120 x 8 mm wall thickness, reinforcements at impact edge * Fixed steel rear underrun protection * Rear underrun protection according to EC directive * Side impact protection according to EC directive * Side protection approx. 460 mm high * Quick-Lock full specification – locks at every possible position – locks are theft-protected * Container locks suitable for accommodating the following container: 1 x 20' container flush with the rear * Length from kingpin to rear edge of vehicle: approx. 6,620 mm Landing Gear: * Two mechanical landing legs, 2 x 12 t, semi-round with base plate, single-sided operation on front right (FR) Axles/Aggregate: * Axles with 9,000 kg load capacity each * Wheelbase: approx. 1,410 / 1,310 mm with center alignment * KRONE axles with air suspension and disc brakes, ET 120 * Axle group spacing = approx. 4,625 mm * Brake discs approx. 430 mm diameter * Extended warranty for KRONE axle: 6 years with unlimited mileage for on-road use within the EU * All wear-related components have a 3-year construction and manufacturing warranty, with natural wear excluded. Applies to EU 2014, Norway, Switzerland, Turkey * Fully automatic load-dependent electronic lift axle control for 1st axle * Manual control function via control panel for forced lifting (starting aid per Directive 97/27/EC) and forced lowering via rotary switch * Preparation of lift/trailing axle(s) for operation from the truck (without truck-side installation), according to selected light/signal connector(s) – to be activated through contact 6 of 7-pin auxiliary socket (ISO 3731) and/or contact 12 of the 15-pin socket (ISO 12098) and/or contact 8A of the VBG socket * With lift and lowering device, including automatic ride height reset Tires (Rims): * 6 units, 385/65 R 22.5 * Without spare wheel * Tread: M+S (mud and snow) * Wheel nuts with protective caps * No spare wheel holder Mudguards: * Plastic wheel arch covers * Splash guard according to EC directive Brake System: * Brake system according to ECE Regulation 13 (including vehicle stability function) * Spring-loaded parking brake * Diagnostics via ISO7638 socket (EBS supply cable) * Brake line connectors below upper frame edge * 4 wheel chocks with bracket * Wheel chock(s) secured with chain * Standard air connections ISO 1728 (palm coupling) * Brake system manufacturer: Wabco * Note: The trailer may only be towed by vehicles that ensure proper ABS operation! * Audible reversing alarm (activated via reversing light) * EBS system, 2S/2M, 2 sensors on one axle Lighting: * Lighting and signaling equipment per UN ECE Regulation No. 482 * Outline marker lights with rubber arm, LED design * Electrical connections below upper frame edge * LED side marker lights * 24 volt front connection with 15-pin socket per DIN ISO 12098 * Additionally, two 7-pin sockets at the front per DIN ISO 1185 and 3731 * Connector contacts (2x7-pin and/or 15-pin) as per ISO11 Pgedpfxexmpwpj Ah Aju

Condition: used, maximum load weight: 37,600 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 09/2026, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment list available on request. Chassis * Double-T longitudinal beams welded with cross members, front construction height: approx. 147 mm (including fifth wheel plate) * ‘Compact rear’ chassis version * Interchangeable 2-inch king pin, single position, front overhang: approx. 570 mm * Container rails made of rectangular tube, approx. 200 x 120 x 8 mm * Reinforcements at the approach slope * Fixed external steel rear impact guard * Rear underrun protection in accordance with EU regulations * Side guard device in accordance with EU regulations * Side protection device approx. 460 mm high * Full Quick-Lock package – lockings at every possible position – theft-protected locking system * Container locks for securing the following containers: 1 x 20' container, rear flush * Length from king pin to rear edge of vehicle: approx. 6,620 mm Support Equipment * Two mechanical landing gears, 2 x 12 t, half-round with base plate, brand: Jost * Operation of landing gears on one side, on right side in direction of travel Axles/Aggregates * 3 axles, each with 9,000 kg load capacity * Wheelbase: approx. 1,410/1,310 mm * KRONE axles with air suspension and disc brakes, ET 120 * Aggregate spacing = approx. 4,625 mm * Brake discs approx. 430 mm in diameter * Optional warranty extension on the KRONE axle: 6 years with unlimited mileage for on-road use within the EU. All wear-related parts: 3 years construction and manufacturer warranty, excluding normal wear. Applies to EU 2014, Norway, Switzerland, Turkey * Fully automatic, load-dependent electronic lift axle control for 1st axle * Manual function via operating console for forced lifting (=start-up aid per Directive 97/27/EC) and forced lowering via rotary switch * Preparation of lift/trailing axle(s) for operation from the tractor unit (installation in tractor not included), per selected electrical connections: - Lighting, for activation via Contact 6 of the 7-pin auxiliary connector (ISO 3731) - and/or Contact 12 of the 15-pin connector (ISO 12098) - and/or Contact 8A of the VBG connector * With lift and lowering facility, including automatic ride height reset Tyres (rims) * 6 pieces, 385/65 R 22.5 * No spare wheel, tread: M+S (mud + snow) * Wheel nuts with protective caps Mudguards * Plastic wheel covers * Splash protection in accordance with EU regulations Brakes * Braking system conforms to ECE Regulation 13 (including vehicle stability function) * Spring-loaded parking brake * Diagnostics via ISO 7638 connection (EBS supply cable) * Brake line connections below upper edge of beam * 4 wheel chocks with holder Pedpfx Asxgk U Aoh Ajgu * Standard air connections ISO 1728 (Palm) * Lightweight alloy air tanks * Brake system manufacturer: Wabco Note: The trailer must only be towed by tractor units that ensure correct ABS function! * EBS system, 2S/2M, 2 sensors on one axle Lighting * Lighting and signal system per UN ECE Regulation No. 48 * 2 marker lights with rubber arm, LED version * Electrical connections below upper edge of beam * LED side marker lamps with directional indicator (flashing function) * 24 volt, front 7-pin socket DIN ISO 1185 * 7-pin socket DIN ISO 3731 at front, for auxiliary functions * Additionally, front 15-pin socket DIN ISO 12098 Note: Connector pins (2 x 7-pin and/or 15-pin) per ISO 1185/3731 and/or ISO