Working platform semitrailer

KRONE SDP 27 Plattform Auflieger

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg Ndodpsic Rl Djfx Aazeb The hydraulic unit is functional, the drive motor is in the removed state.

Year of construction: 1988, condition: used, 480 x 325 mm; 14,000 units/hour; 7 stations 6 feeders 279 Card gluing unit 1 folding feeder 1529 Stapling station 300 Ndodpfsbnczbex Aazeb Trimmer

Condition: used, mileage: 891,000 km, power: 228 kW (309.99 HP), first registration: 01/2010, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 4x2, fuel: diesel, gearing type: automatic, Year of construction: 2010, The turbocharger is defective! (TURBOCHARGER DAMAGE) Not roadworthy! Nedpfx Aast Tw Szozedb Otherwise, the engine and transmission are in good condition! Length of the box: 6.50 m Height of the box (inside): approx. 2.25 m

Condition: new, Year of construction: 2026, Equipment: ABS, 5 Axle Lowbed Ndodpsrlm Txofx Aazob Please get contact with us for more informaiton;

Year of construction: 2025, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement: Nedpfxomdn Tro Aazsdb

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors Ndjdpfodf Ud Sjx Aazeb A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector Ndodpfxotycdke Aazjb - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 Nsdpfxjiyya Ao Aazjdb 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: used, mileage: 645,465 km, power: 332 kW (451.39 HP), first registration: 07/2008, fuel type: diesel, empty load weight: 7,610 kg, maximum load weight: 10,390 kg, overall weight: 18,000 kg, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, parking heater, power assisted steering, seat heater, spoiler, traction control, Vehicle location: Bovenden, Grr. Haus, 1x comfort seat, 2x recliner, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, electric roof, auxiliary heating, switch 16, ABS (anti-lock braking system), traction control (ASR), constant throttle, front exhaust, roof spoiler, side spoiler, differential lock, fog lights, leaf air suspension, aluminum tank, low noise G1 Wheelbase: 3800 mm ONLY FOR SPARE PARTS! ONLY FOR SPARE PARTS! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Ndodpfx Aovhhtceazsb - .

Condition: like new (used), functionality: fully functional, mileage: 400,000 km, first registration: 06/2017, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, emission class: euro6, Year of construction: 2017, Equipment: air conditioning, crane, trailer coupling, MAN TGS 26.420, year 2017, 400,000 EUR, Euro 6 emission standard, air conditioning, automatic transmission, Bonfiglioli 30500 XL crane with 6 extensions, tipper body, 6.20 m x 2.55 m, 60 cm sideboards. Nedjzhv Iqepfx Aazsdb