KUKA Central Hand ZH 125/150 II VA6

KUKA ZH 125/150 II VA6

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Dodsfzk Ewspfx Al Soku Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: used, Year of construction: 2018, Industrial robot Manufacturer: Kuka Type: KR16 R1610 Cybertech Year of manufacture: 2018 Reach: 1,612 mm Weight: 263 kg Payload: 16 kg Kuka KRC4 controller Weight: 145 kg Software version: V8.5.4 Dodpfx Ajxtdalol Sjku Kuka touch panel Kuka connecting cables 61026

Year of construction: 2023, condition: new, Ultrasonic cleaner with PLC, specially designed for medical needs. Capacity: 50 Liter Automatic filling: Available Automatic dosing: Available Lid: Pneumatic piston Programmable: Yes with PLC Liquid level control: Available ultrasonic cleaner, ultrasonic degreasing machine, ultrasonic washer, small ultrasonic washing machine, medical ultrasonic cleaner, automative Djdpfx Alsfg Eqwo Sjku

Year of construction: 2012, condition: ready for operation (used), A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible. Dodpjxdm Uaefx Al Sjku

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: IRB6700-300/2.7 IRC5, load capacity: 300 kg, arm reach: 2,700 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. Reliability as Standard. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Excellent basic condition. This robot will be professionally cleaned but not repainted. Brand: ABB Type: IRB6700-300/2.7 Controller: IRC5 Payload: 300 kg Reach: 2.7 m Comes with an ABB Lean ID (see document): The IRB 6700 LeanID ensures flexible operation and minimizes downtime (due to cable wear), providing better process efficiency and reducing manual handling. In short, IRB 6700 LeanID delivers a strong return on investment. Optional: We can deliver the robot with an ABB IRBTx004 track (up to 32 meters if needed). Complete with the 7th axis drive unit installed in the robot controller, motor, cable chain, grease pump, fully functional and operational. About: Our daily, reliable business is the delivery of refurbished A-brand robots: ABB, KUKA, FANUC, and YASKAWA. Dodpfjwqqtvjx Al Soku Established in 2002. We ship worldwide.

Condition: refurbished (used), PRICE ON REQUEST! - 5 units, used and inspected completely overhauled, all wear parts replaced - completely measured - Gear play: Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.02 WM - Central hand newly adjusted - Endurance test for 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand available for exchange (without exchange available on request) - Gearbox overhaul of axes 1-6 - 12 months warranty 18 months possible for an additional fee MORE THAN 100 central hands immediately available in stock, various models. Just inquire! We also offer an express overhaul of your KUKA central hand – 48-72 hours from delivery. In addition, we also offer the repair of ABB wrists. Dedpeg A Iv Eefx Al Soku

Condition: refurbished (used), KUKA wrist ZH 210/240 Foundry - used & tested completely overhauled, all wear parts updated - completely confused - Operation game Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.01 WM - KUKA wrist new adjustment Dedpfx Asgz Tciol Seku - Long test 8 hours at 100% load - Delivery in a special box (protected shipping) - Central trade in exchange (without exchange on request) - Transmission recovery of axles 1-6 - 12 months value added 18 months possible on an extra charge possible On stock more than 100 central hands on stock, various models. Ask a question! Also a express overhaul of your KUKA Central Handheld - From delivery 48 - 72 hours. In addition, we also repair the ABB handgelenke.

Condition: used, Year of construction: 2017, operating hours: 3,928 h, overall weight: 434 kg, load capacity: 12 kg, arm reach: 1,850 mm, This is a used, tested industrial robot ABB IRB 2600-12/1.85 from year of manufacture 2017 with IRC5 Single controller. The system is designed for industrial automation applications and is typically used in areas such as handling, assembly, and trajectory applications. The robot features a payload capacity of 12 kg, a reach of 1850 mm, and a total of 3928 operating hours. The unit comes equipped with various software options including DeviceNet, PROFIBUS, World Zones, Path Recovery, and Collision Detection. Dsdpfx Aoy Nfktjl Seku

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust. Dsdpfx Asv S Dihol Seku

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, load capacity: 16 kg, arm reach: 1,610 mm, The KR 16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16 Standard & Foundry ( more option is also available ) Condition: Used & Tested Year: 2006 Dkjdsq A Uiuspfx Al Ssu Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant (Gripper and the base is not included) Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)