Diesel Forklift

Linde H40D-01/600

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Gsdev S Hyvopfx Abdobg Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: excellent (used), Year of construction: 2023, operating hours: 106 h, lifting height: 5,000 mm, fuel type: diesel, mast type: triplex, power: 185 kW (251.53 HP), gearing type: automatic, fork length: 3,000 mm, color: red, Transmission: Hydrodynamic powershift, 3 gears, automatic Year of manufacture: 2023 Unladen weight: 46,760 kg Lifting capacity: 33,000 kg Overall height: 370 cm CE certification: yes Technical condition: very good Visual condition: very good KALMAR DCG 330-12 FORKLIFT TRIPLEX FULL FREE LIFT FORK SHAFT SYSTEM 33,000 KG at 120 CM SHORT WHEELBASE = 475 CM FORKS: LENGTH = 300 CM, WIDTH = 30 CM, THICKNESS = 11 CM FRONT AND REAR VIEW CAMERAS TIRE PRESSURE MONITORING CENTRALIZED LUBRICATION LED LIGHT PACKAGE CHASSIS / BODY: - Towing pin Gbedpfx Aov Hn D Eobdeg - Steps with slip protection - Rearview mirrors mounted left and right on the front fenders - Heavy-duty and protective fenders CAB: - EGO cab - Clear and hardened safety glass, thickness 6 mm - Clear windows including sliding windows in the left and right doors - Full doors with locks left and right - Complete control system on right console including light control, rotary dial for display, levers for load handling system (electrically adjustable, 2-way) - Multifunction lever on left side including horn, indicators - Braking system with pedal left and right - Cabin comfort including mirrors, handles, interior lighting, etc. - Wipers and washers for front/rear and roof window - Hydraulic steering with electrically height-adjustable steering wheel, manual fore-aft and lateral adjustment with steering knob - External reverse lights - Tiltable operator’s cabin - Step handle, left - Automatic heating and ventilation (ECH) with fresh air filter - Speed control pedal right - Kalmar standard key system - Cup holder - Coat hook - Color display: fuel level, indication; engine and transmission temperature; engine oil pressure; battery voltage; clock and date; operating hour counter; service interval display; speed; engine RPM; various popup information; AdBlue display STEERING SYSTEM: - Kalmar steering axle, including double-acting steering cylinder DRIVE TRAIN: - Axletech drive axle HYDRAULICS: - Electric servo - Sight glass on hydraulic oil tank - Variable displacement pumps - High-pressure filter - Automatic increase of engine speed when using the load handling function - Standard tilt angle 5F/10B ELECTRICAL SYSTEM: - 24 V electrical system - Rear and brake lights, LED - Working lights on front fenders, LED - 2 mast working lights - Turn signals including hazard lights, LED - Main power switch WHEELS: - Michelin 16.00x25

Condition: new, Year of construction: 2019, functionality: fully functional, For sale: steel hall structure 1. Location: Braniewo, Poland 2. Dimensions (axes): 21.9 x 27.4 + 12.4 x 21.9 (W x L) [m], usable height = 4.50–5.1 [m] 3. Steel structure is new, never assembled, painted, stored outdoors since 2019, bolted assembly 4. Offer includes: - Main supporting structure (columns, beams, bracing), without Z-purlins and connecting bolts - Roof skylight 2x16 m 5. Drawings: 5.1. Sections: 2 pcs 5.2. Roof structure plan: 1 pc 5.3. Design requirements: 1 page 5.4. Photos: 2 pcs 6. Price: €69,000 net, ex works 14-500 Braniewo, Poland 7. Note: possibility of extending/modifying the structure by our company Gjdpfexyid Nox Abdjbg 8. Possibility to purchase part of the offered hall structure 8.1. Option to provide Z-purlins and connecting bolts for an extra charge 9. Free loading We are a manufacturer of steel halls and also offer tailor-made solutions – halls built to customer specifications, including delivery and assembly. Contact us for more information, a quotation, or a non-binding consultation.

Condition: good (used), functionality: fully functional, Conveyor belt length: approx. 28 m Gbodpfjv Scaxjx Abdsg Discharge height: approx. 10 m Feed hopper capacity: approx. 10 m³ with adjustable dosing conveyor belt 2 transport conveyor belts (one flexible) on a 3-axle chassis Powered by an ENDRESS 45 kVA generator

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,205 h, load capacity: 5,000 kg, lifting height: 3,925 mm, free lift: 1,210 mm, fuel type: electric, mast type: triplex, construction height: 2,210 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: Reconditioned with warranty Technical condition: very good Front tires type: Superelastic Rear tires type: Superelastic Battery Volt: 80V Battery Ah: 840Ah Battery year of construction: 2017 Battery condition: 80 - 100% Description: TOP CONDITION !!! - GENERALLY REFURBISHED by LINDE !!! Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, CE certificate, safety light, LED, Godpst Iy Rvofx Abdsbg Container compatible, Double pedal control, Integrated charger, Battery 92 % residual capacity !!!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Technical data on the EPS (Polystyrene) press: Manufacturer FZ-Recycling GmbH & Co. KG, Germany Type FZR 320 Year of construction 12/2022 Drive power shredder 4 kW Drive power of compactor screw 7.5 kW Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW Total connected load 12.6 kW Current consumption 32 A Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material) Block weight after compaction approx. 300kg/m³ (depending on material) Block dimensions 320 x 320 mm, variable length Throughput approx. 100 kg/hour, depending on material Achievable density approx. 250 - 300 kg/m³ The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped. Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h) Transport weight press 1,325 kg Condition of the baler: Gbjdpfx Aju Thkajbdsg The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug. Scope of delivery for the baler: 1 piece EPS press, ready for connection and use Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW Godpfx Abowvqklodobg • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: good (used), The Miele PW 6101 MF EL is an industrial washing machine with a 10 kg capacity and electric heating, specifically designed for environments where reliability, durability, and hygiene are essential. Suitable for care facilities, cleaning companies, hotels, gyms, and laundries. Product number: 0019034 Brand: Miele Model: PW 6101 MF EL Gbedpfx Abjw Hcgaedjg Length: 800 mm Width: 800 mm Height: 1400 mm Connection voltage (V): 400

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 6,287 h, load capacity: 12,000 kg, lifting height: 7,500 mm, free lift: 2,320 mm, fuel type: diesel, mast type: triplex, construction height: 4,150 mm, power: 142 kW (193.07 HP), fork length: 2,400 mm, drive type: Diesel, Heavy-duty forklift - diesel Load centre: 1200 mm Mast type: Triplex Transmission: Hydrostatic Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyres condition: New Rear tyres type: Superelastic Rear tyres condition: New Sideshift, fork positioner, Forks 2400 mm - NEW!! 3rd valve, 4th valve, rear work lights, front work lights, heater, road approval (StVZO), full cab, air conditioning, full free lift, CE certificate, LED, Godpfx Aswblw Robdobg

Condition: refurbished (used), 150 m³ / 150,000 l extinguishing water tank according to DIN 14230 Tank volume: 150,000 liters / 150 m³ length: approx. 22.500 mm diameter: approx. 3.000 mm Weight: approx. 32,000 kg Material: steel material S 235 JRG 2 Underground tank for underground storage, single or double walled, suitable for walkable and drivable areas (load class SLW 30) with 1 dome (outer diameter 720 mm) with blind cover, seal and screws. New or used immediately available! Gbedpfx Abshh St Iedog The tank is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The tank complies with the regulations of DIN 14230 (underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted fire department coupling /fixed coupling A according to DIN 14319 in the design form B without gauge connection - Venting flange connection in NWN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground - Outside provided with a bitumen coating for protection - On request we can provide the tank with a full interior coating on a bitumen basis or epoxy resin interior coating (against corrosion) - It is also possible to line the tank with a with a plastic inner cover A cost-effective delivery with our own truck is possible. Just tell us the place of delivery, you will immediately receive the exact freight costs. An inspection is possible at any time after prior appointment.