Planer and moulder

WEINIG Hydromat 23

Condition: excellent (used), functionality: fully functional, Working width: 230 mm Working height: 160 mm Number of spindles: 5 Spindle configuration: 1. Bottom 15 kW 2. Right 11 kW 3. Left 11 kW 4. Top 15 kW 5. Bottom 7.5 kW Spindle speed: 6000 rpm Kfjdpex Hzv Tsfx Ah Uea Spindle diameter: 50 mm 3 feed rollers in the work table Feed speed adjustable via inverter up to 60 m/min Feed driven by cardan shaft Pneumatic pressure rollers Technical documentation Machine dimensions: 300x180x170 cm (H) Weight: 3500 kg

Condition: used, machine/vehicle number: 12599, Rotor diameter: 600 mm Rotor width: 1450 mm 12-knife rotor Kfodpfok N Iy Njx Ah Uoa 3 rows stator knives Inlet cross section approx. 780 x 1490 mm Drive motor: 132 kW

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, number of spindles: 6, Four-side planer and moulder Manufactured by Weinig Type: Hydromat 23C Kfsdpfxjx E Ak Ao Ah Uja Year of manufacture: 2005 Working width: 230 mm Working height: 120 mm 6 spindles Spindle arrangement: bottom/right/left/top/top/bottom Spindle motors: 7.5 kW each Automatic table lubrication Automatic Memory System control system Spindle diameter: 40 mm Spindles with bearings on both sides The last two heads are equipped with jointers

Condition: excellent (used), Weinig Hydromat 23C with 6 Spindles. Max width 245mm Max Thickness 160mm Separate electrical panel. Separate remote control panel Automatic lubrication system for bedplates Full heavy duty sound enclosure. 15kW feed motor 100m/min No 1.  7.5kw - Bottom 6000rpm straight jointer prepared No 2. 11kw - Right 6000rpm straight and profile jointer prepared No 3. 15kw - Left 6000rpm straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 5 . 30kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 6 . 15kw - Bottom 6000rpm + Outboard bearing + straight and profile jointer prepared 50mm spindles Beam 0.55kW Full documentation included. Kjdpfx Ahjx Dq Rfj Usfa Heavy duty sound enclosure. Possible to supply with hydro tooling if needed. Possible to supply with full mechanisation if needed.

Condition: good (used), functionality: fully functional, Max. pressing length approx. 2,750 mm Max. gluing width approx. 1,750 mm 10 freely movable support arms, each with a hydraulic press cylinder and one grid-adjustable counter bearing Press cylinders can be freely positioned on the support arms Kjdpjww Awgsfx Ah Uofa Support arms suspended from above, allowing for quick relocation from one side to the other Dimensions of press cylinder block: 115 x 50 mm Dimensions of counter bearing: 115 x 50 mm Max. cylinder stroke approx. 30 mm Gluing rack movable on rollers Installation dimensions (LxWxH): 3.1 x 1.0 x 2.25 m Press cylinders have been pressure-tested in stock.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Kodpfxoxqh E Hs Ah Usfa Two powered rollers in the table.

Condition: good (used), Planing width 20-230mm Planing height 8-160mm Number of heads 6 Arrangement of heads Bottom Kfsdovbwzvjpfx Ah Uoa Right Left Right Top Bottom Drawing rollers in work table 4 Pneumatic pressures hydraulic feeder

Condition: new, Equipment: lighting, Take your painting process to a new level - with mobile convenience. Mobile paint booths in container design for painting and coating various objects. They are specially designed for mobility so that they can be easily transported and set up on different construction sites. The booth is usually equipped with a ventilation system to ensure air quality, lighting and a filter system that prevents paint mist from escaping. The ventilation system ensures that the vapors and particles released during painting are kept inside the booth so that there is no danger to the environment. Mobile paint booths are a practical and flexible solution for companies that need an effective painting system that can be moved from one construction site to another at any time. Overview of the design and functions Kfsdpfx Ahoun Shgj Uoa Our mobile 20-foot Sapi painting containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The floor is made of tear plate. There are ventilation grilles in both door leaves, which are fitted with fine-pored filter mats. One leaf is designed as an escape door for safety reasons and has a viewing window. It should also be mentioned that these are not simply converted shipping containers! We manufacture all our containers from scratch ourselves. We only use the most stable materials that meet the requirements and have also been tested and proven in terms of safety. Normal shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction wall for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with baffle plates including various suspension and fastening elements for the filter equipment. The powerful and EX-protected extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile spray booths: meeting EU requirements and advancing coating solutions The new generation of mobile spray booths must meet the highest EU requirements. The consideration of new paint systems such as hydro paints, polyurethane resins, epoxy-zinc dust or epoxy-iron-mica paints places high demands on existing paint booths. That is why we have developed a new and unique mobile paint booth for the next generation of coating solutions. An important criterion is the transportation of the workpieces for painting and for further processing steps. Do you need more information? Our engineers can offer expert advice and support. Whether paint mist dry separation or wet scrubbing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.

Condition: used, Year of construction: 1996, Weinig Hydromat 23 Technical data Working width 30 - 230 mm Working height 19 - 200 mm Spindle down, right, left, up, down Kjdpsqrt Ekefx Ah Ujfa u- re-li-o-u.o without infeed machine only Machine is dismantled, immediately available Transport can be organized

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) Kjdpfxjxlcufj Ah Uofa 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: new, Year of construction: 2023, machine/vehicle number: A2306/9210, The pneumatically working drawer clamp type Box V3.0 ensures a simple and fast assembly of drawers and frames. Thanks to its functional design, it is possible to press single parts as well as complete drawers with different connections. This way, a perfect connection as well as shape of the drawer can be guaranteed. Because of the special clamping process, folding connections and drawer fronts with glass insets cannot be deformed. Maximum clamping power: vertical: 800 kg / horizontal: 800 kg Adjustable depth stops allow clamping of drawers with longer fronts Lateral press units slowly approach the workpiece Machine operation via joystick. Special equipment: Kodpfogqfnzjx Ah Usfa - Digital positioning readout - Kit Door (for frontal clamping of drawer corners) Advantages: - High flexibility: Variably adjustable clamping unit for drawers and frames of different dimensions - Minimum set-up times allow high output - Intuitive operation - High safety standards due to CE-conformity e.g. 2-hand-operation - Plug & Play

Condition: excellent (used), Year of construction: 2003, Weinig Hydromat 23C with 6 Spindles. Separate electrical panel. Automatic lubrication system for bedplates Maximum dimensions 140mm x 230mm No 1.  11kw - Bottom 6000rpm + Outboard bearing - straight jointer prepared No 2. 11kw - Right 6000rpm - straight and profile jointer prepared No 3. 11kw - Left 6000rpm - straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing - jointer prepared No 5 . 11kw - Top 6000rpm + Outboard bearing - straight jointer No 6 . 18.5kw - Bottom 6000rpm + Outboard bearing - straight jointer 7.5 kw feed. 6-60m/min (Possible to increase speed as needed). 50mm spindles Beam 0.55kW Kfodpsxtwl Ijfx Ah Usa Full documentation included. Possible to supply with hydro tooling if needed. Possible to supply with infeed and outfeed if needed.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, extraction nozzle diameter: 140 mm, planer shaft diameter: 40 mm, workpiece height (max.): 230 mm, type of input current: three-phase, number of spindles: 7, working range: 230 mm, blade shaft diameter: 50 mm, Equipment: cabin, motor brake, Four-sided planer Weinig Hydromat 23, 80m/min Working width: 230mm Working height: 160mm Ksdpfxjxww Hms Ah Uefa Number of spindles: 7 Spindle configuration: 1. Bottom: 15kW 2. Right: 11kW 3. Left: 11kW 4. Top: 15kW 5. Top: 7.5kW (hydro support) 6. Bottom: 11kW (hydro support) 7. Universal: 11kW (variable speed via frequency inverter) Planing dimension control from ATS panel Spindle speed: 6000 rpm Spindle diameter: 50mm 5 feed rollers in working table Feed speed adjustable via frequency inverter up to 80m/min Feed driven by cardan shaft Pneumatic hold-downs Technical documentation included Machine dimensions: 460x230x200cm (H) Weight: 6000kg

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and brushing machines on machineseeker! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for every membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to the Required size or supplied by roll. SILICONE Type: MS-2 Colour: milky white Surface: textured/smooth width (standard): 1680/2000 mm Kfodpfod S Efaox Ah Uja polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700-1750 and 2000 mm rubber: Natural rubber hardness: 42°Shore thickness: 2.5 - 4.0 - 5.0 mm temperature range: min. - 20 °/max. +130°C NATURAL RUBBER Special two-part version for Waterbed / oil-presses Type: MNK-2 WB Colour: grey/black Surface: Both sides smooth width (standard): 1700 mm rubber: Natural rubber hardness: 42°/60°Shore thickness: 3,5 - 4 mm temperature range:min. - 20 °/max. +130°C Standard SILICONE Rubber Sheet Type RSS Colour: redbrown or transparent (other colours on request) Surface: both sides smooth Standard length: cut or 10m rolls (other lengths on request) Standard width: 1200 mm - up to 1800 mm on request Polymer: Silicone hardness: 30° - 80°Shore thickness: 0.5 - 10 mm

Condition: excellent (used), Year of construction: 2003, Weinig Hydromat 23C with 6 Spindles. Separate electrical panel. Automatic lubrication system for bedplates Maximum dimensions 140mm x 230mm No 1.  11kw - Bottom 6000rpm + Outboard bearing - straight jointer prepared No 2. 11kw - Right 6000rpm - straight and profile jointer prepared No 3. 11kw - Left 6000rpm - straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing - jointer prepared No 5 . 11kw - Top 6000rpm + Outboard bearing - straight jointer No 6 . 18.5kw - Bottom 6000rpm + Outboard bearing - straight jointer 7.5 kw feed. 6-60m/min (Possible to increase speed as needed). 50mm spindles Beam 0.55kW Full documentation included. Possible to supply with hydro tooling if needed. Possible to supply with infeed and outfeed if needed. Kjdpfxexgq Rds Ah Ujfa