Hydraulic cylinder stroke 495 mm

Lingk & Sturzebecher LS-DZ-DD-220/125-496-250-1"-GAB/GAS

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm Bwjdpfx Aajhzbipo Nji - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,000 h, spindle speed (max.): 2,500 rpm, overall weight: 1,800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. • Control: Conventional with lead screw and infinitely variable speed adjustment • Readouts: Digital display for axes and digital spindle speed display Bwsdpfex D Nwdsx Aa Nsi • Operating hours: No counter; estimated 5,000–7,000 h • Turning diameter: 400 mm • Center height: 195 mm • Bed width: 1270 mm • Toolpost: MultiFix quick-change tool holder Additional equipment • 3x three-jaw chucks • 3 sets of claw jaws • Chuck wrench • Manual/operating instructions • Work area lamp • Digital dial indicator • 4 MultiFix tool holders • Various turning tools • Drill chuck (keyless) for tailstock • Coolant pump

Year of construction: 1984, condition: used, gr. grinding Ø: 40 mm small grinding Ø: 5 mm weight: 0,9 t 2 grinding wheels with flange Bedpfx Aecq Rv Uea Nowi 8 collets 1 coolant tank mechanical feed with fixed stop The cardan shaft for the workpiece drive is worn out

Condition: new, Year of construction: 2023, Welding turntable, tank turning device 6000 Kg load capacity Didital display with foot remote control diameter from 180mm to 3500 mm drive rollers diameter 300mm dimensions: length 1900mm x width 470mm x height 390mm Speed infinitely variable 200 - 1800 mm / min. Bjdek Adl Hspfx Aa Njwi

Condition: used, Year of construction: 1977, bore capacity in steel (diameter) 75 mm arm length 1700 mm workpiece height max. 370 - 1700 mm total power requirement 12 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _____ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial arm 950 mm Horizontal adjustment of drilling slide 1.500 mm 12 Drilling feeds 0.047 - 2 mm/rev Spindle drive, approx. 10 kW Total electrical load 12 KW - 380 V - 50 Hz Weight 7.000 kg Accessories / Special Features: * Preselector for the Spindle speeds, hydraulically actuated * Choice of Feed rate mechanically * Drilling with or without infeed, respectively manually by a fine feed device/resp. by handwheel * Drill head slide adjustable on radial arm manually, vertical Radial arm adjustment Motorized. * Depth of infeed adjustable by stop dogs on quill dial, with automatic return of quil after stop of infeed * Electro-mechanical clamping of the radial arm and the drillhead via switch * Coolant equipment built in the lower table plate, VOGEL Central lubrication * Built-on cubic table, approx. 600 x 1,200 x 300 mm. Bsdpfxjt Hw Uvo Aa Njwi This machine is ideal for steel work, tool work, and mechanical engineering. Condition : average to good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm Bwjdpocl Svvsfx Aa Nji -Weight: 560 kg

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 20,500 kg, fuel type: diesel, tank capacity: 1,500 l, color: white, power: 1,000 kW (1,359.62 HP), output current: 1,811 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 1,000 kW (1,359.62 HP), nominal power (apparent): 1,250 kVA, continuous power (apparent): 1,250 kVA, total length: 6,060 mm, total width: 2,440 mm, total height: 2,900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Cummins, type of cooling: water, 6 units available. Diesel Generator Container – Cummins KTA50-G3 – 1,250 kVA Many other sizes available from 1,000 kVA – 2,500 kVA! For sale: one soundproofed diesel generator set in a 20-ft container, suitable for emergency (standby), island (off-grid), and grid-parallel operation. The unit is configurable for 50 Hz operation and comes fully equipped for automatic backup power applications. Performance Data 50 Hz PRP: 1,250 kVA / 1,000 kW / 1,811 A Voltage: 400 / 230 V Power factor: cos φ 0.8 LTP: 1,375 kVA Main Components Diesel Engine: Cummins KTA50-G3 Generator: Stamford PI734B Power Output: Integrated generator circuit breaker Connections: M12 cable lugs on copper busbar Noise Emission 75 dB(A) at 7 m ±3 dB(A) Operating Modes Island/off-grid mode Grid-parallel operation (with synchronizing device) Emergency power mode (integrated mains monitoring) Seamless resynchronization External circuit breaker control possible Equipment Engine pre-heater Battery charger Rapid power availability in case of mains failure: < 15 seconds 1,500-liter integrated diesel tank, switchable to external tank via 3-way valve Oil-resistant container base (catch basin for all fluids) Connections available for external/mobile fuel tank systems Container / Generator Construction Soundproofed design, 20 ft standard container Exhaust outlet: top Air outlet: top Air inlet: front side Dimensions: Length: 6.06 m, Width: 2.44 m, Height: 2.60 m + 0.30 m exhaust flap Weight: approx. 20.6 t incl. diesel Fields of Application: Emergency power supply, industrial facilities, infrastructure, construction site power, temporary power supply Bwsdpeygaavsfx Aa Nei Price: on request Location: Pupping, Austria Availability: 6 units in stock

Year of construction: 2009, condition: new, belt dimensions 2000x100mm Belt speed 30m/sec Angle adjustable from 30 to 90 Power 3kW 4000V50Hz Weight 200kg Bwsdpfxjx Dave Aa Nsi Rollers for grinding rye 3/4";1/2"; 1"; 11/4"

Condition: new, weight max. 10 t Bodpsf Ep Dijfx Aa Newi workpiece diameter 100 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min total power requirement 2 x 0,55 kW

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW Bwjdpfx Ajtv Iklsa Nsi weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm