Glass cutting table auto loading

Lisec ATH-D 2 or 4 or 6 positions

Condition: excellent (used), Span actual approx. 25,0 m Jibs fixed leg useable (possible)/ total (possible) max. approx. 18,5 (21,5)/22,0 (25,0) m swing leg useable/total max.approx. 12,5/16,5 m Lifting height under Spreader actual/possible approx. 11,3/14,0 m Construction/reconstruction TAKRAF/TEICHMANN Hodpfx Abjd N D U Dedji Year of reconstruction 2019

Condition: ready for operation (used), Year of construction: 2008, • Glass thickness (mm): up to 30 Hedpexgtqgjfx Abdsi • Glass height (mm): up to 2000 • Cleaning brushes: 4 front and 4 rear

Condition: excellent (used), Year of construction: 2012, The Vertical Machining Center enables drilling, milling and cutting operations and cornering within the scope of technical capabilities indicated in the manual in details: plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, aluminum. The vertical work table allows for easy feeding and unloading of processed details and reducing the maximum size of the device to the minimum necessary. Tool change with the use of a 10-element magazine located on the side of the device, it enables various works to be carried out without the need to remove the workpiece from the table. Maximum dimensions of the processed detail: X= 4200mm Y= 1600mm Z= 20mm Rapid traverse speed (m/min): X=30 Y=30 Z=15 Set of milling heads T1 and T2: Spindle power (kW) - 3.3 Hjdpfxemzbr Sj Abdei Rotation speed (rpm) - max 18000 Electric spindle with clamp - ER32 T3 Drill Head Assembly: Spindle motor power (W) - 370 Rotation speed (rpm) - max 2800

Condition: used, • Load capacity 350 kg • 6 vacuum suction cups, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction cups with guide tube and electric trolley • 4 units available, brand new and unused • Immediately available IV: + Design Standards 1. The construction of the unit strictly complies with European CE standard EN13155:2016, American ASME (Mechanical Engineering Association) B30-20-2006, and German UVVI8 regulations. The key design parameters exceed the requirements of the aforementioned standards. 2. Safety factor: The main structure features a factor of 4.0, vacuum safety level is 65%, and the standard safety level is 85%, which is 20% above the standard safety requirement. V+ Equipment Inspection and Standards 1. General Check that all materials are complete, inspect if the equipment exterior is painted or scratched, check for damage to the suction cups and pipes. 2. Pre-shipment Inspection © Equipment suction test © Equipment pressure holding test © Alarm system test © Various control components Hodpexnvq Eofx Abdei • Price on request

Condition: excellent (used), Year of construction: 2015, CNC glass milling and working centre NEPTUN QUICKMILL 160-30 NC Year of production: 2015 Milling, seaming of milled profiles and drilling (only with frontal head) Hsdjrzazyepfx Abdoi Maximum working height: 1600 mm Maximum working length: 3000 mm Minimum glass size: 800 x 340 mm Glass thickness: 5 - 12 mm NC controlled (with software) Excellent condition Good working order, still in production As is Available immediately

Condition: like new (used), Year of construction: 2002, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, overall weight: 850 kg, type of input current: three-phase, Manual Lisec butyl extruder LBH-25V, year 2002, fully overhauled (technically and optically), for profile widths 6-24 mm, 2 butyl storage cylinder for x 7,5 kg butyl. The machine will be available by the late in February / early in March 2026. Please note: the photos show the same type extruder after our last overhaul. Hodpfxsydc Nnj Abdsi

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, CMS AURA automatic vertical dry seaming machine Max. working height: 2.700 mm Glas-Thickness: 4-22 mm Max. Glaslänge: 3.100 / 4.500 mm Stand-Alone or integrated into the ISO Line Hedpfx Aewd Ihqobdei Very easy operation with nearly no maintainance.

Year of construction: 2021, condition: like new (used), functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM Hjdpfxotwphwo Abdsi The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulcan transport rollers. In vertical position transport rollers with Perumaan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. The transport rollers are vulcanized and ground. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection

Condition: good (used), Year of construction: 2003, functionality: fully functional, overall weight: 2,450 kg, type of input current: three-phase, power: 7 kW (9.52 HP), automatic Lisec butyl application machine LBH-25AS, additionally to standard frames also useable for Georgian bar frames, consisting of: - RFVS-25/25, inlet conveyor Hedpfxert Ipdj Abdei - LBH-25AS, automatic butyl application machine - RAVS-25/25, automatic frame lift - FRS-25A, automatic overhead frame conveyor As a completion to a full automatic spacer frame butyl application line we also have following machines available: - RFVS-25/25U, inclination changer from +6° to -6° - A2RL-25/25RN, year 2001, full automatic desiccant filling machine for profiles with 6-24 mm width All machines are available from our stock and can be seen in our warehouse in Hofkirchen/Austria

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 34205, total width: 4,100 mm, total length: 12,195 mm, cutting length (max.): 3,700 mm, We are selling our fully functional Hegla ProLam 37. Special features: Traveren – rotation device Support arms = 4 units for Low E glass, reinforced version Technical specifications: Hsdpfoxqc U Aox Abdji Film thickness: 0.38 mm to 3.8 mm Maximum cutting height: 2 x 3 mm to 2 x 8 mm Maximum glass size: up to 3,750 mm Year of manufacture: ProLam 37 (2011) Brand: HEGLA The machine is still in operation and can be inspected on site at any time. Additionally, we have an EcoLam 60 available for sale, which we would include for an additional €10,000.