Styrofoam shredding plant

mütek MSZ 600

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 20,000 l, diesel filling station 20000 litre with pump Hjdpfx Asi Artlsnlet

Condition: new, Funnel opening: 2,500 x 2,000 mm Hsdpfx Anebq St Hjljt Rotors: 2 units Rotor diameter: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gearboxes Hydraulic locking system for sieve flaps to remove disruptive materials Weight: approx. 18,500 kg

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. Hodpfx Anetvat Toljt At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor Hedpforgzv Nox Anlst * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, - Motor power 7.5 kW - Cutting force 20 tons Cutting channel designed for: - max. roll length 1100 mm - max. roll diameter 900 mm - Machine weight approx. 2500 kg - Tank capacity approx. 100 liters - Hand protection guard in the area of the control panel and opposite - Color scheme: Housing RAL according to customer requirements Protective guard/knife bar RAL 1028 melon yellow Made to order Price and further information on request. Hodeftnt Nspfx Anlst

Year of construction: 2009, condition: like new (used), Press with container Hedpfx Anjfhb Tielot Engine 5,5 kW 400 V

Condition: excellent (used), Year of construction: 1988, operating hours: 3,100 h, functionality: fully functional, overall weight: 8,960 kg, Willibald MZA 2500/Shredder/Chipper • Manufacturer: Willibald • Model: MZA 2500 • Year of manufacture: 1988 • Operating hours: 3,100 hrs • Engine: V6 Mercedes-Benz • Throughput: 75 m³/h depending on material • Feed opening: 500 mm • Swinging hammers • Suitable for shredding organic material for composting (garden waste, pruned wood up to a diameter of 30 cm) • Capable of reducing waste wood and used timber up to a diameter of 30 cm • Number of axles: 2 tandem/dual axles • Brake system: Air brakes • Towing eye: 40 mm • Total weight: 8,960 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. - Subject to intermediate sale. - Errors and/or typographical mistakes excepted. Hodexu Dipopfx Anljt - Sale according to our general terms and conditions.

Condition: excellent (used), Year of construction: 1993, Wieser Vorbrecher DV 1350-V EPS Crusher / Grinder / Shredder Capacity: 40 m³/h Available: 3 units In addition to its crushing function, the machine also acts as a rubbing mill (granulator), designed to break the material down into individual EPS beads. Unlike simpler machines of this type, which only feature a primary crusher, this is a much more advanced design consisting of two main sections: 1. Upper Section: Twin-Shaft Primary Crusher This section performs the initial size reduction of bulky material before it enters the grinding chamber. 2. Lower Section: Grinding and Rubbing System The final reduction process takes place in the lower chamber, which consists of: Hedpfewtmw Aox Anlot -Rotor: equipped with 3 moving blades -Stator (fixed knives): equipped with 2 stationary blades -Screen: located at the bottom of the chamber, allowing only sufficiently processed material to pass through Optional Equipment The machines can also be supplied complete with dust collectors and an extraction fan. The Wieser ESTAL1350 dust collectors were specifically designed to match the throughput of the crusher. Tags: EPS shredder, EPS crusher, styrofoam grinder, recycling machine, waste reduction system, foam granulator, EPS waste processor, volume reduction machine, compactor, dust collector, extraction fan.

Condition: new, Year of construction: 2025, Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 55 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; capacity of hopper: 5L (approx. 3kg powder); power supply and consumption: 220V, 1.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; flow rate inert gas: approx. 200L/min; machine dimensions: L1900xW1118xH2524mm; weight: 800 kg. Specifications refer to Nespresso capsules, by use of other brands of capsules specifications may vary. Hsdpfx Aev Nkzxsnlot Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: reconditioned (used), Year of construction: 1995, operating hours: 18,000 h, functionality: fully functional, overall weight: 7,500 kg, rotor diameter: 370 mm, number of blades: 71, rotor length: 2,500 mm, power: 75 kW (101.97 HP), rotational speed (max.): 130 rpm, filling opening width: 1,450 mm, filling opening length: 2,500 mm, year of last overhaul: 2026, warranty duration: 12 months, input voltage: 400 V, blade width: 40 mm, Intake length: 1450 mm Intake width & rotor length: 2500 mm ᴓ rotor: 370 mm nº of cutters: 71 un (40x40 mm) Rotor speed: 118 rpm Motor: 75 kW Voltage: 400 V Frequency: 50 Hz ᴓ screen: 30 mm Hodpfx Asrrhczjnlst Machine weight: 9000 kg Machine in operation