Roller conveyor with drive

2.50.2-ST

Condition: used, Year of construction: 2000, grinding length 1600 mm grinding width 600 mm workpiece height 500 mm total power requirement 50 kW Bodet Hxcbjpfx Aczsdk

Condition: ready for operation (used), CAPE BRAND EPAL BEVELING MACHINE WORKING. MAXIMUM SIZE 2500mm Bdedpfjk Nf S Usx Aczsk

Condition: used, Year of construction: 2006, Bale size 400x400 mm Force 1 Step 850 KN Force 2 Step 850 KN Force 3 Step 850 KN Steel < 8 to/h Aluminium < 4 kg/h Driving Power 50 KW Arrangement Surface 7,5 x 7,2 m x m Machine weight 29 to Press box aperture1,9 x 0,95 mxm Place: Germany Available immediately Bdsdeltinwopfx Aczjk

Condition: good (used), Year of construction: 2014, Hurco VMX 84 T, Year of manufacture 2014, WinMax control, X/Y/Z travel 2135/860/760 mm, 40-station tool changer, SK 40 tool holder, Spindle speed up to 18,000 rpm, High-pressure internal coolant system, Simulation graphics, Electronic handwheel, Pocket milling with islands, Bdsdpjv S Twujfx Aczok DXF software, 3D infrared probe

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material Bsdpfjfg E Hlex Aczedk 6. Open the vise

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts Bjdpjp T Twusfx Aczedk screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: reconditioned (used), Year of construction: 2018, The SQUALO 420 multi-blade or multi-blade circular saw with double shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. Ideal for the production of strips, squares, sawn timber, profiles, edged boards, prisms, boards, elements for pallets. SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE Bdodpfx Acohrdxiszek

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, year of last overhaul: 2022, A complete BSH production line is for sale. The plant consists of components from System TM (feeding section), Keilzinken Technik NKT, HIT automation (multi-level storage, transport, lamella feeding repair station, planing and Kallesoe, etc.). Planing machines from REX: pre-planer, lamella planer and finish planer. High-frequency press from Kallesoe. 2 silos. Bdodowgcchspfx Aczok

Condition: used, Year of construction: 2025, faceplate diameter 1.250 mm swing diameter 1.600 mm turning height 1.400 mm Control Fanuc max. Torque 17.885 Nm cutting capacity max. 3.000 kgf max. workpiece weight 8.000 kg table: table diameter 1.250 mm table speeds 0,9 - 360 1/min power capacity - table 37/45 kW C - Axis: resolution 0,001 ° Bsdpfx Acevp Scqozodk Working speed 0 - 1.200 °/min max. table speed 3,333 1/min turret slide: Shank diameter 32 mm spindle cone ISO 7/24 / No.50 Spindlespeed 30 - 3.000 min/-1 power capacity - Tool Spindle 15 / 18,5 kW max. Torque 235 Nm ram cross section 220 mm axis stroke: x-axis 1.060 mm z-axis 900 mm cross rail adjustment 700 mm Tool-Presetter: tool taper MAS-BT 50 number of toolpositions 24 (12 + 12) pos. max. tool weight 50,0 kg draw bolt DIN 69872.50 feeds: rapid feed (X / Z) 7,5 m/min feed speeds max. 7.500 mm/min rapid traverse of the crossrail 300 mm/min total power requirement 80 kVA weight of the machine ca. 30,0 t dimensions of the machine ca. 7,00 x 6,00 x 4,70 m CNC - Vertical Turret Lathe HANKOOK - VTC 125 E - NEWMACHINE - price delivered, installed, commissioned in Germany / Europe

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used straightening press in very good condition for sale. Bjdsufhzvjpfx Aczsdk This universal and robust Stierli straightening press has a 5m straightening beam. It can process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with the proven Stierli stroke fine adjustment control. It is therefore very easy to operate and allows fast, precise straightening and bending. Additional options can also be added on request, e.g. driven roller conveyor, NC control, laser measurement etc... (Note: The photo does not correspond to the original image)