Drawing Machine

Schumag KZ II B

Year of construction: 2001, condition: excellent (used), Multispindle lathe Schütte AG20 Rodpshrihyefx Abgow

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Rjdpsr Nfvmefx Abgjw Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: new, Year of construction: 2025, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, 1 multispindle TORNOS SAS16-DC in rebuilding - new electrical cabinet SIEMENS or FANUC, to choose Rodougl S Ispfx Abgjw – pick-up with brake – adjustable stop with counter operation – 3 independent feeding system – several tool-holders and drillings – drum bar with support – Options :automatic bar loader IEMCA PRA, numerical tapping, CNC cross slides, etc... Contact us.

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Rjdsd Nw Ttepfx Abgsw Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: used, Year of construction: 1987, Technical details: number of spindles: 8 spindle passage: 51 mm Rsdeiay Sfspfx Abgew Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control “Balluff” clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations Redjfz U S Eepfx Abgow The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Rjdpof Dwa Usfx Abgow +++++

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Redpfeghrguox Abgsw Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Rsdowqb Scepfx Abgsw Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X-axis: 650 mm Y-axis: 325 mm Z-axis: 350 mm B-axis: 130 degrees C-axis: 360 degrees Spindle speed: 30,000 rpm Spindle interface: HSK 50 Tool changer: 60 positions Control system: Makino Professional 5 Includes hybrid length measuring system Includes measuring probe Includes approximately 60 HSK 50 tool holders (MST + Rego Fix) Spindle has been replaced Ball screws for X and Y axes replaced in 2024 Rodpfx Abjzapp Hogew Machine currently has approximately 32,000 spindle hours and is still in active production Available from approximately week 46/2026 An inspection with the machine powered on can be arranged at any time.