Agitator tank with double jacket

Condition: ready for operation (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, machine/vehicle number: SK02UXKP0365, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, Auction of a Zeiss T-Scan Hawk with only 20 operating hours! TECHNICAL DETAILS Maximum measuring range: 550 mm x 600 mm Iodpfxsx Sqfnj Addetb Measuring accuracy: 0.02 mm + 0.035 mm/m MACHINE DETAILS Laser class: Class 2M (eye-safe) according to IEC 60825-1:2014 Operating hours: 20 EQUIPMENT Notebook GOM Inspect software

Year of construction: 1997, condition: refurbished (used), 2 pieces volute casing pump in process design 1 piece completely overhauled, new ball bearings for pump and motor. Mechanical seal overhauled by specialist company. All seals new. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 1/min Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277mm Bearing type: roller bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type drive end oil Lubricant monitoring Oil level controller Materials: Pump housing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Heat-treated steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: Cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Nominal size of suction nozzle: DN 80 Discharge connection Nominal diameter: DN 40 Nominal pressure suction PN 10 Nominal pressure pressure PN 10 Coupling manufacturer: Flender Itodjiuznuopfx Addeb Coupling type: Eupex NH with intermediate sleeve Base plate: gray cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 1/min Frequency: 50 Hz Rated voltage: 400 V Rated motor power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, load capacity: 2,500 kg, throat depth: 2,500 mm, empty load weight: 713 kg, construction height: 3,350 mm, pivoting range: 360 °, Column Slewing Crane M25-2.5 TECHNICAL DETAILS Load capacity: 2,500 kg Jib outreach: 2,500 mm Height: 3,350 mm Slewing range: 360° Outreach: 2,500 mm Underside of jib: 2,980 mm Overall height: 3,350 mm Bolt circle diameter: 530 mm Flange outside diameter: 610 mm Beam flange width: 150 mm Minimum approach dimension (Aa): 420 mm Internal approach dimension (Ai): 820 mm Support column length: 1,530 mm MACHINE DETAILS Weight: 713 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 48 V EQUIPMENT Electric travel trolley Electric chain hoist Lifting capacity: 2,500 kg Lifting height: 4 m Lifting speed: 4 / 0.7 m/min Crane trolley Motorized travel trolley Flange width range: 138–195 mm Flange width: 150 mm Travel speed (max.): 10 m/min Travel speed (min.): 3 m/min MACHINE DETAILS Travel motor (trolley) Power: 0.3 kW Rated current: 1.2 A Starting current: 4.2 A Hoist Hoist motor power: 3.6 kW Hoist motor rated current: 8.2 / 4.3 A Hoist motor starting current: 39 / 6.7 A Electrical Data Operating voltage: 400 V Isdpfex Nvtlox Addstb Frequency: 50 Hz Control voltage: 48 V

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 10000987990, total height: 5,300 mm, total length: 30,000 mm, total width: 8,900 mm, load capacity: 3,200 kg, lifting height: 4,450 mm, Up for auction is a Konecranes overhead crane with 2 bridges, each offering a lifting capacity of 3.2 t. TECHNICAL DETAILS Lifting capacity: 3,200 kg Span: 8,900 mm Lifting height: 4.45 m Hoisting speed: 3.9 m/min (ASR 1.2 m/min) Iodpfx Adsx Nvrzedjtb Trolley travel speed: 20 m/min, infinitely variable Crane travel speed: 40 m/min, infinitely variable MACHINE DETAILS Number of bridges: 2 Number of trolleys: 2 Dimensions & Weight Dimensions (L x W x H): 30,000 x 8,900 x 5,300 mm Trolley weight: 230 kg Crane total weight without trolley: 1,300 kg Electrical Data Operating/Control voltage: 400 V / 48 V, 50 Hz Rated power: 3.0 kW EQUIPMENT Runways Radio remote control Conductor rails Overload protection Load spectrum memory Signal horn Pre- and limit switches for trolley and crane travel (slow/stop) Guide rollers to reduce skewing forces Buffer extension to compensate for guide rollers

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 5000065442, Product number: 2414J Type: UNIMIX I V 3500 Serial number: 5000065442 Year of construction: 2007 Mixer: 3500 litre double paddle mixer Isdpfx Adjiphrpedstb Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 41kW Dimensions: 3650 x 2100 x 4300 mm With (N²) nitrogen injection. Mixer on weighing cells

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 11690446, load capacity: 4,000 kg, lifting height: 6,530 mm, TECHNICAL DETAILS Span: 9.9 m Crane lifting capacity: 4,000 kg Lifting height: 6.53 m Lifting speed at full load: 3.2 m/min Lifting speed at partial load: min. 3.0 m/min up to max. 7.5 m/min Trolley travel speed: 20 m/min Crane travel speed: 40 m/min MACHINE DETAILS Weights Itedpex Nvpgefx Addjb Trolley weight: 390 kg Crane weight without trolley: 1,750 kg Classification Crane class: 3U4/Q2, EN 13001-1 Hoist mechanism group: 4.3 + 4.4 m / ISO M6 Crane girder mechanism group: 16 m / M5 Electrical data Power supply: 400 / 48 V / 50 Hz Rated output: 3.3 kW EQUIPMENT Radio control Overload protection Load spectrum memory Pre- and end-limit switches for crane and trolley travel Remote control type “Mini Joystick” Spare transmitter Storage cabinet Spare battery Charging station Signal horn Hook collision protection Hook center-of-gravity alignment Manual crane hook tracking Safety conductor line incl. main disconnect switch and power supply Clampable holding brackets Riser cable (fixed installation) to be provided by customer

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 10000987991, overall weight: 5,110 kg, load capacity: 6,300 kg, main lifting speed: 4,000 mm/min, lifting height: 5,200 mm, 6.3t S-DG Double-Girder Overhead Crane TECHNICAL DETAILS Crane rail type: 60 × 40 Load capacity: 6,300 kg Span: 17.100 m Maximum deflection of crane bridge at rated load: 22.8 mm Wire Rope Hoist Max. lifting capacity of hoist 1: 6,300 kg Hoist classification: 1.2 + 1.2 m (D_min) Lifting height: min. 4.9 m / max. 5.20 m Type of trolley: double rail trolley Wire rope control: with hook drift Hook type/size: RSN2.5V Speeds Hoisting speed at rated load: min. 0.08 m/min to max. 4.0 m/min CSR speed at partial load: max. 6.00 m/min Trolley travel speed: max. 20 m/min Crane travel speed: max. 40 m/min MACHINE DETAILS Weight of crane including hoist: 5,110 kg Electrical Data Supply voltage: 3 Ph / 400 V / 50 Hz Control voltage: 48 V Area of application: indoors Ambient temperature: min. 5 °C to max. 40 °C Motor Power Main hoist motor: 4.5 kW Duty cycle main hoist motor: 60% ED Trolley travel motor: 1 × 0.45 kW Duty cycle trolley travel motor: 40% ED Crane travel motors: 2 × 0.65 kW Duty cycle crane travel motors: 40% ED EQUIPMENT DynADrive inverter control Control Pro Performance 4-stage hoist limit switch Hoist brake Wire rope drum Gearbox Overload protection Load spectrum recorder Slow/stop limit switches for trolley and crane travel Crane equipped with REMOX516MI radio remote control Includes signal horn (sound level 98 dB) Iedpfox Nvlbsx Addjtb Includes spare transmitter for radio remote control Includes storage cabinet for remote control Rope angle features Safety festoon line approx. 30 m long, along central support row Includes mains disconnect switch and power feed at any point Rising main (fixed installed cable) to be provided by customer Note: Further technical details can be found in the attached quotation.

Condition: used, functionality: fully functional, A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom. Isdpfownx H Ejx Addstb

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 8531, Auction of a Famot MEXPOL TUM 35! Ijdpfjx Ngnmsx Addstb

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 40167, Auction of a MAHO universal milling machine! Itsdpfx Adsx Ngkzodsb

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Ijdjv Ha Uijpfx Addetb Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 50 h, machine/vehicle number: 2390, bending force (max.): 100 t, stroke length: 140 mm, throat depth: 300 mm, distance between stands: 2,600 mm, overall weight: 6,650 kg, TECHNICAL DETAILS Itedpsx Eyv Nsfx Addjb Bending force: 100 t Cylinder stroke: 140 mm Open width without tooling: 345 mm Distance between uprights: 2,600 mm Throat depth: 300 mm Approach speed: 160 mm/s Bending speed: 10 mm/s Return speed: 130 mm/s Rotational speed: 1,500 rpm MACHINE DETAILS Control system: DA 66 T Oil capacity: 125 L Total weight: 6,650 kg Power: 7.5 kW Voltage/Power supply: 400 V AC Control voltage: 24 V AC/DC Operating hours: under 50 h

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Scoring blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Additional Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Overall height: 2,020 mm Machine Accuracy Itsdpfx Asx Sqpmoddeb Positioning accuracy: ± 0.1 mm (measured at feed-in) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw carriage forward speed: 5 – 120 m/min Saw carriage return speed: 120 m/min Feed-in forward speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Feed-in return speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: used, Item: AV-11841-Vertical40m3tank Used vertical tanks, capacity 40.000L Exterior dimensions: Dia Ø 3200/3400 mm Total H 9600 mm incl. gear. Cylinder height: 7200 mm. Itsdpoi E Abiofx Addeb Vertical stainless steel tanks - 3 pcs. Insulated with 100 mm rockwool completed with flat plate. Conical bottom 35 degrees with 4" outlet. Klöffer top with manhole. Powerful top mounted agitator. 37 kw agitator. AISI 316.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0-250-05-2654, travel distance X-axis: 3,950 mm, travel distance Y-axis: 1,943 mm, travel distance Z-axis: 400 mm, controller model: HOMATIC-2000 IPC, No reserve price – guaranteed sale to the highest bidder! The machine is equipped with a C-axis! TECHNICAL DETAILS Travel distances X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical drilling unit X-direction Drill spindles: 16 Z-stroke: 60 mm Drilling depth: max. 38 mm Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drive: 1.5 kW Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical drilling unit Y-direction Drill spindles: 15 Z-stroke: 60 mm Drive: 1.5 kW Rotational direction: clockwise/counterclockwise Speed: 1,500 - 5,900 rpm Drill chuck: d= 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Arrangement: Y-direction Horizontal drilling unit X-direction Drill spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: counterclockwise Speed: 4,800 rpm Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal drilling unit Y-direction Drill spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotational direction: clockwise Speed: 4,800 rpm Drill chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Router motor Drive power: 7.5/10 kW (S1/S6 duty cycle) Speed range (stepless): 750 - 18,000 rpm Cooling: liquid recirculation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool changer magazine Magazine positions: 30 tool positions Tool weight: max. 5 kg Tool change time: approx. 8 - 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC Liquid recirculation cooling: 18,000 l/min Power: 7.5 / 10 kW S1/S6 operation EQUIPMENT Integrated CNC axis (360° rotational) Torque support Main spindle (motor power 7.5 / 10 kW, HSK F63) Itsdpfjx Sqm Sex Addob Workpiece support system 1,500 mm Workpiece console K-table 1,500 mm Gantry extension Y-direction 120 mm Compressed air connection strip with quick couplers Extraction hood for additional router motor Router 5 kW with Hydro quick-release clamping system Left-side safety guard with door Safety tread mat 3,250 mm Control cabinet left Note: For further details regarding the machine’s equipment, please refer to the attached documents.