Test laboratory

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. Iedpfxsr Ak Exj Adija In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Year of construction: 2016, condition: ready for operation (used), Compressed air supply: 6bar, connected load: 2.7kW, weight: 450kg with documentation and Single-Head Welding Machine Rottler und Rüdiger Roweldo S X7, year of construction: 2016, an inspection is possible. Ijdpfjgfbqnjx Adija

Condition: excellent (used), Year of construction: 2016, MBR RADOVANOVIC WSR-27 Maximum glass height: 2700 mm Working direction: from left to right (L-R) PLEASE NOTE Machine excluding inlet and outlet conveyors Very good and clean condition Good working order Available immediately Iedpfoq Ih Nyex Adija

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Vitro-Wash 16 V washer MTT-V 16/36 loading station Iedjwz Elbjpfx Adija year 2024 3600 kg 45 kW 3/N/PE - 50Hz 400V 6 bar, 20L/min

Condition: ready for operation (used), Year of construction: 2012, Left-Right with loading conveyor LBH 25 ARS RFVS-U FRS 25 -A Iedewii Hlopfx Adiea year of manufacture 2012 - 2018 Butyleuse 05 (2)

Condition: excellent (used), Year of construction: 2021, 1. Switch on the wall and the electronics. Do this by switching on the mean switch and the lightwall (on the back). So switch on the multimeters. See photos 1 and 2 2. Adjust the upper and lower beam to the right cell height. Do this with 2 people. See photo 3 Ijdpfxjv Ep U Ae Adiea 3. Check if there is no power on the cables coming from the power beam. Use the multimeters for this. 4. Connect the cells with the cables. 5. Check the cells with the protocol “Q3 quality finished cell”. 6. Use the right voltages for the different products. 24V for ddLC and 46V for scatter. 7. When doing the capacity measurement, turn the black switching knob from “power” to “R/C”. When done turn it back to “power” 8. When you have ddLC cells use the lightwall and the rotatable polar. 9. If you have scatter cells remove the lightwall and use the spotlight. For swtiching on/of this spotlight you can use the remote control. See photo 4. 10. When you are done, please use the mainswitch to power down, and switch of the used lights.