BINDING LINE FOR CALENDAR 70cm

MAGRAF AS-70 + EP-70

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Fjdpfx Aoyx Uy Ael Sspn Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: new, pressure 8,5 kN Fpedsfv Awaspfx Al Sjn stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Fpodpfxextmqte Al Sen Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2004, condition: used, Used Kilian E 150 PLUS single sided rotary tablet press. Has stainless steel covers. 26 stations capable of up to 16 mm tooling, EU-B of toolings. Manually adjustable fill depth up to 20 mm. Pre-pressing at 23 kN and manually adjustable main pressure up to 100 kN (10 tons). Maximum capacity 162 800 tablets per hour. Stainless steel change-speed forsed feeder. Press is driven by el. Motor 4kW/3ph/400V/50hz with frequency changer. New 2004. Fpsdpfowm Ar Ajx Al Son

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P5-0174, working width: 530 mm, type of input current: AC, input voltage: 400 V, overall weight: 175 kg, space requirement height: 1,097 mm, space requirement length: 1,100 mm, space requirement width: 710 mm, input current: 15 A, table width: 1,070 mm, input frequency: 50 Hz, empty load weight: 105 kg, Equipment: safety light barrier, Double Loop closing machine for books and calendars. Adjustable sizes for all diameter rings up to 25 mm Footswitch controlled. Light beam safety guard. Fpedpfx Aerzuluel Sjn Power requirements: 380-415 v 50/60 Hz

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 Fpsdehqqnzepfx Al Sjn PRESSURE : 500t DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: good (used), Schmedt – PräRund – PräDeck – PräKant, in good condition, immediately available. Fpjdpfx Aloh Dy Ivs Sjn

Condition: used, Hohner universal stitching head 52/8 - 6er ring eyelet - for round wire No. 24 - 26 - with various accessories acc. pictures condition as shown in the photo Fsdpsfc Rx Tsfx Al Sopn

Year of construction: 2008, condition: ready for operation (used), X-axis: 2500mm, Y-axis: 1270mm, positioning speed X-axis/Y-axis: 80/90m/min, simultaneous axis speed: 100m/min, punching capacity: 200kN, number of turret stations: 51, max. material thickness mild steel: 3.2mm, max. material weight at traverse speed F1/F4: 50/150kg, positioning accuracy: ±0.1mm, stroke rate X-axis: 350/min, stroke rate Y-axis: 260/min, max. stroke length: 42mm, max. feed speed X-axis/Y-axis: 80/60m/min, turret speed: 30rpm, compressed air requirement: 500l/min, operating air pressure: 5bar, connected load: 19kVA, length: 4165mm, width: 5120mm, height: 2082mm, height with mirror: 3028mm, weight: 13t, operating hours: 4531h, regularly maintained by the manufacturer, with documentation, without punching tools. An on-site inspection is possible. Fpjdpfsza E S Djx Al Son

Condition: used, Year of construction: 2007, Year: 2007 Condition: excellent Rilecart R-800-closer Closing tools included: - 1/4 Fpedpfxjww Ecrj Al Ssn - 7/16 - 5/16 - 3/8 Semi-automatic binding machine Rilecart R 800 for binding calendars, blocks, etc. in a double metal spiral from 3/16" to 9/16". Binding width from 100 to 800 mm. Automatic hook inserter