Second-hand machinery for sale (200,000)

Condition: excellent (used), Year of construction: 2012, Capacity Swing over bed 950mm Swing over carriage 630mm Max turning diameter 950mm Max turning length 4845mm Distance between centres 5000mm Max load between centres 5000kg Spindle Spindle speeds 2 - 630rpm 630 H Max 205 L Max Spindle speed range step manual 2 Spindle nose type A2-15" Spindle bore 254mm Spindle centre taper MT6 Number of Tool positions 8 Ibjdpozhaqvsfx Am Djc

Condition: used, Year of construction: 2006, number of axes: 3, working width: 2,040 mm, working length: 3,680 mm, TECHNICAL DETAILS MACHINING PROCESS Machining process: Drilling and milling WORKING AREA X-axis working area: 3,680 mm Y-axis working area: 2,040 mm Number of working areas: 2 Number of controlled axes: 3 WORKTABLE Table type: Flat table / Nesting table Number of tables: 1 Table width: 3,680 mm Table length: 2,040 mm Table material: Aluminum DRILLING UNIT Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-axis: 2 Horizontal drilling spindles, Y-axis: 2 Total number of drilling spindles: 11 MILLING SPINDLE Number of milling spindles: 1 Isdez Enz Uopfx Am Dsbc Position of milling spindle: top Controlled axes: 3 Motor power: 13 kW Speed: 24,000 rpm Automatic tool changer: yes TOOL MAGAZINE Number of tool magazines: 1 Tool slots: 12 Tool magazine: positioned at the head VACUUM SYSTEM Number of vacuum pumps: 1 Suction capacity: 250 m³/h CONTROL AND SOFTWARE Control: PC-based control Programming software: Xylog Plus MACHINE DETAILS MAIN DRIVE Power of main electric spindle: 13 kW SAFETY CE marking: yes Protective guard: permanently mounted on the machine Safety system: front safety mats EQUIPMENT Aluminum nesting table Suction cups for workpiece clamping Vacuum pump Drilling unit with 11 drilling spindles Milling spindle with automatic tool changer Tool magazine with 12 tool slots PC-based control Programming software Xylog Plus Protective guard permanently mounted on the machine Front safety mats

Condition: good (used), 750 litre vacuum cutter direct from Bankrupt meat-free factory. The machine was rebuilt and only used for a short time before the company went Bankrupt. Ibedpfex N Nlzsx Am Doc

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. Iedpfx Asz En Axjm Djbc External Reference: 7694

Condition: used, empty load weight: 8,735 kg, maximum load weight: 30,265 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 01/2027, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, loading space volume: 86 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,600 mm, color: white, Year of construction: 2024, Equipment: ABS, Tare weight: 8735kg, GVW: 39000kg, Loading area (L W H): 13,403 mm x 2,490 mm x 2,600 mmTyre size: 385/65 R22.5, Loading area volume: 86 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, 1x15 pin plug, Antispray, Trailer connect (with subscription). Including: Trailer Connect door contact sensor Trailer Connect tyre press. monit. system. 3 Pairs of recessed loadlock., Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Ibedpfx Aezupv Iem Doc

Condition: used, Year of construction: 2026, operating hours: 50 h, functionality: fully functional, machine/vehicle number: YC-2600, Toilet roll rewinding machine toilet roll cutting machine toilet roll packing machine Ibjdpfoz Ih T Aex Am Djc air compressor one jumbo paper roll 1368kg more than 2000 paper cone free full package only €37000

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. Iodezlt Ayopfx Am Debc The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: ready for operation (used), 1 x stitching unit 1550 1 x Touch Screen Navigation control 1 x SEMKO side caliper  2 x stitching heads HK75Q 6 x section feeder 1551   fitted with ASIR camera recognition              ONLY 2,600 hours from NEW 1 x cover folder feeder 1528 fitted with ASIR camera recognistion  1 x three knife trimmer 1565 Ibodpfx Aozlu Sijm Djc 1 x stream delivery 1564 Optional if needed; Waste extraction system Loop stitching heads Standards stitchinbg heads Slim line stitching heads

Year of construction: 2013, operating hours: 3,300 h, condition: excellent (used), functionality: fully functional, Used Terex Finlay 883 Tracked Screening Plant Iedpoz Nlf Hsfx Am Dsbc Year 2013 3300 Hrs (Hr Clock Has Reset At 3000. Common Issue On Terex Control Panels) 16 x 5 Screenbox 55mm Fingers Top Deck & Mesh Bottom Deck CAT 4.4 No Adblue / DPF Very Good Unit. Ready To Go To Work 32,000 kgs Weight

Condition: excellent (used), Year of construction: 2010, operating hours: 70,257 h, functionality: fully functional, overall weight: 645 kg, input voltage: 415 V, We have for sale a 2010 FANUC M-710 iC 50s robot with a 30iA controller in very good condition. please see the photos for run times. just been greased and tested Ibedpfxozxrqcs Am Dsc

Condition: good (used), 400mm wide screw feed former with recent control screen upgrade by GEA. Has been used for production of vegetarian products. Can be supplied with other machines to make a complete coating and frying line. Iodpfxeg E S H Re Am Dobc

Year of construction: 2001, condition: used, Sottoriva Sprint 30 serial: B31656 2001, 30L spiral mixer, variable speed, stainless bowl and contact parts, safety guard, with timer Ibjdpfxjdqapbj Am Dsc

Condition: good (used), Robuschi ES55/2P-RVP80-CAR Blower Serial: 4001 Ibedpotwdqtsfx Am Djc Air blower, in box, 30Kw, 3Ph

Condition: like new (used), Reimelt RS2A Inline sifter Rotation sifter for sifting out impurities, breaking lumps and aerating the product, previously used to sift high volumes of flour Iodpfxok S Ewgj Am Djbc

Year of construction: 2013, condition: excellent (used), Flexipak rotary pot sealer Serial: 1270 2013, stainless rotary pot sealer, twin station sealer, previously used to seal a 60mm diameter pot, also comes with plate for an 80mm square pot, adjustable temp controls, with foot pedal, 1Ph Iedpfx Amolc Dhrj Dsbc

Condition: excellent (used), Ishida multihued weigher with elevated conveyor, gantry and PFM bagging machine. Removed from a high care cooked meat plant in the last few weeks. Lovely condition. Ijdjlkc U Eopfx Am Debc

Condition: like new (used), 12fill VMP semi auto filling machine Ibodpohpqvyofx Am Djc semi auto filling machine with volumetric dosing system, ideal for pastes, creams, sauces and pates, 100ml to 1000ml, up to 25 fills per min, mobile frame with foot pedal

Condition: excellent (used), MiVeg System 4080 skewering system for meat and veg kebabs. These are a far more reliable system than the normal French machines sold for this job. Cost new was EUR 160,000 Ijdpfx Aeu Tty Hsm Djbc

Condition: good (used), Year of construction: 2011, machine/vehicle number: A05B-2551-B280, Fanuc LR mate in very good condition. It was removed from an injection moulding process where it loaded the the plastic blanks prior to forming and was only in production for 5 yrs. it comes with the robust R30iA controller which has ethernet connectivity to connect to your PLC or can be configured to work as a stand alone unit Ibedpjtiy Sgefx Am Dec

Condition: good (used), Year of construction: 2012, functionality: fully functional, load capacity: 165 kg, controller model: 30iA, teach pendant manufacturer: Fanuc, input voltage: 400 V, type of input current: three-phase, Used but good condition. Repeatability test done, greased, mechanical and RAM batteries changed. We have cleaned it up but it did come from a spotweld environment so has obvious signs of use. Ibodpfx Asuqa Tiom Dec

Condition: good (used), overall weight: 280 kg, FANUC positioner. manufactured in 2012. tested and serviced. Ibodpfx Aswzk Syem Djc collection only

Condition: used, empty load weight: 8,429 kg, maximum load weight: 30,571 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2019, next inspection (TÜV): 11/2026, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, loading space volume: 86 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2019, Equipment: ABS, Tare weight: 8429kg, GVW: 39000kg, Loading area (L W H): 13,410 mm x 2,490 mm x 2,600 mmTyre size: 385/65 R22.5, Loading area volume: 86 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Lift axle front, Pallet box (double), Electronic Brake System EBS, Toolbox, Ferry lashings, Bolted chassis, Temperature recorder, 1x15 and 2x7 pin plug, Antispray, Telematics system, Alcoa rims, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Ibsdpfxozbgf Uj Am Dsc

Condition: used, empty load weight: 8,832 kg, maximum load weight: 30,168 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2018, next inspection (TÜV): 11/2026, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, loading space volume: 86 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,600 mm, color: white, Year of construction: 2018, Equipment: ABS, Tare weight: 8832kg, GVW: 39000kg, Loading area (L W H): 13,410 mm x 2,490 mm x 2,600 mmTyre size: 385/65 R22.5, Loading area volume: 86 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, Spare wheel carrier, Ferry lashings, 1x15 and 2x7 pin plug, Antispray, Engine serviced. ATP - FRC Done in Dec 2025., Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Ibedpoxv E T Esfx Am Doc

Condition: used, Year of construction: 2007, functionality: fully functional, HWACHEON HI TECH 200 B FANUC CONTROL MAX TURNING DIA 350 MM MAX TURNING LENGHT 400 250 MM HYD 3 JAW CHUCK TAILSTOCK SLOTTED TURRET Iodjz N Dfljpfx Am Dsbc YEAR 2007 TOOL SETTER

Condition: used, Used Matcon approximately 600 litre stainless steel IBC. Unit measures approximately 1,000mm long x 1,000mm wide x 170mm straight side with a 600mm deep conical bottom. Mounted on forkliftable base. Includes discharge cone. Specifications: Capacity (gal/l): 158.5 gal Ibodpfx Aezg U Srem Dec Dimensions: 39.37 x 39.37 x 6.69, 23.62 deep