Used Automatic Boring (Drilling) Machine for sale (74,653)

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Hfedpfx Ajlhwr Repneg Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: excellent (used), Year of construction: 2010, I sell the automatic drilling machine KUSING. Working width up to 1200mm Magazine for elements Hfsdpfxet I U E Is Apnsg Configuration: 1+1 motors from sides Atypic 2-spindle drilling heads included 2 x 32mm. Drilling heads in price. Very good condition. Available immediately.

Condition: good (used), Year of construction: 2000, Drilling unit SUHER Power master, year of manufacture 2000. Hsdpfx Aoxr Dlxjpnefg

Condition: good (used), Year of construction: 2000, Drilling unit SUHNER Mono master Type: BEM12 ST25 1040, year 2000, equipped with Siemens motor. Hodpsxr Dk Ujfx Apnjfg

Condition: used, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 120 rpm, table length: 550 mm, table width: 320 mm, spindle mount: MK 2, total height: 1,500 mm, total length: 1,400 mm, total width: 2,100 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 3,000 rpm, drilling capacity: 75 mm, distance between stands: 600 mm, spindle motor power: 551 W, For sale is a Hauser brand coordinate drilling machine of type OP3 The machine is ready for use and fully functional Technical data: HAUSER OP3 coordinate drilling machine Table: 550 x 320 mm Longitudinal travel: X-axis 400 mm Cross travel: Y-axis 250 mm Vertical travel: Z-axis 400 mm Cone in the spindle: MK 2 Drilling capacity in steel: 20 mm Stroke of the drilling spindle Z-axis: 130 mm Bore diameter: max. 75 mm Hfodpfxovzrx Nj Apnsg Distance from table to spindle: 600 mm Spindle speeds: infinitely variable: 120- 3000 rpm Feed rates: Drill spindle slide: Number (steps) 2, 0.03 mm/rev 0.06 mm/rev Spindle motor: 0.75 HP Machine weight: approx. 1500 kg Dimensions: 1400x1500x2100 Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewings possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Hfsdefbt Hujpfx Apnsg Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders Hjdpfx Ajxdttijpnefg - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, feed length X-axis: 24,000 mm, feed length Y-axis: 450 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, total length: 28,000 mm, drilling capacity: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, control cabinet width: 1,620 mm, control cabinet length: 450 mm, total height: 3,400 mm, total width: 2,600 mm, control cabinet height: 2,200 mm, overall weight: 11,200 kg, workpiece weight (max.): 8,000 kg, positioning accuracy: 1 mm, spindle speed (min.): 200 rpm, rotational speed (max.): 4,000 rpm, spindle speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, travel distance X-axis: 600 mm, table width: 1,000 mm, drill diameter: 40 mm, compressed air connection: 8 bar, roll diameter: 108 mm, table length: 1,000 mm, table height: 710 mm, power: 21 kW (28.55 HP), Equipment: rotational speed infinitely variable, Complete automatic drill-saw street for profiles APS Europe Profile steel drilling machine RDR-1036 and Band saw RS-1300 Increase your productivity with this complete automatic drill-saw street for profiles. Designed to work efficiently and accurately with different profile steel materials. Hfedstnf Iyepfx Apnsg Price does not include disassembly, assembly, transportation and import duties. Please contact us for more information about this machine.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Worktable size: 316 x 436 mm Digital display Travel X, Y: 250 x 350 mm Diameter of electrode: Ø 0.4 mm; Ø 0.5 mm; Ø 1.0 mm; Ø 2.0 mm Hfedpfx Apsyr Ntpjnjg Z1 stroke: 300 mm Tank capacity: 25 l Machine size: 1060 x 750 x 2100 mm Machine weight: 600 kg

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Hjdpfx Apou T Ty Hjnjfg Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, Year of construction: 2013, 3-axis system Max. glass dimensions: 1600 x 2600 mm Min. glass size: 100 x 350 mm Glass thickness: 3 - 19 mm Hole/double-sided 16 compartments for 16 positions Length: 5850 mm Hfsdewmqrqepfx Apnog Width: 5500 mm Max. Installation height of the system: 2200 mm

Condition: used, Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Hfodsxuf Uaopfx Apnsg Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, overall weight: 1,900 kg, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually Hfedpfx Apod S Uhqoneg ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Year of construction: 2025, operating hours: 12 h, condition: new, Front drilling machine – automatic for drilling legs at various angles, with a pendulum table. Triple drilling with chip extraction. The machine can operate in different settings and configurations. Designed for through-hole drilling. Hfjdpfx Apjxb Elxsnsg

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Hfjdegwbbqepfx Apnjg Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Year of construction: 2021, condition: new, modular drilling machine 8 automatic units Do: Go mad Model: Wu 3g 2C 3T Description: Producer GOMAD Hfsdpfxjhara Ds Apneg Benh7jc8jp Year of production 2021 Machine category Modular drilling machine location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Shipping costs Client protection Start type to be agreed Description Remarks MODULAR MODULAR DRILL, TRAILER SLIDING BLADE, HALF-ADAPTATION WITH AIR PEDAL DRILL EQUIPMENT Year: 2021 THE NEW VERSATILE DRILLING MACHINE

Condition: used, machine/vehicle number: 007869, Max. panel width: 3200 mm Max. panel length: 800 mm No of Bottom Units: 5 Hfjdpswimzyefx Apnog Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007803, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 4 Positioning of Units by NC: yes Hfjdpfoyhbhwex Apnjg Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007202, Max. panel width: 2500 mm Max. panel length: 1000 mm Hfsdpfx Aou Rv Ukepneg No of Bottom Units: 3

Condition: refurbished (used), Double knurling machine with drilling unit, for spindles with central hole. Complete with loader, unloading belt and finished price containment. Hfodpfxjpk Taxo Apnog

Condition: excellent (used), Alzmetall AC 25 AS Hfsdpfx Aeydf D Uspneg 380V

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Hodpfx Apsy E Exienefg Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm Hjdpfeyy Rn Sex Apnjfg * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: used, functionality: fully functional, power: 3.68 kW (5.00 HP), input voltage: 380 V, type of input current: three-phase, Microcut Vertical Turret Milling Machine – 5HP Microcut vertical turret milling machine manufactured by Buffalo Machinery Co. Ltd, Taiwan. Heavy duty industrial machine fitted with power feeds, coolant system and machine vice. Model: 5VK type with 5HP motor and 380V 3 phase supply. Suitable for precision engineering, fabrication, maintenance workshops, toolrooms and general machining work. Features include: Vertical turret milling head Large T-slot table Power feed controls 5HP motor 380V 3 phase Machine vice included Coolant tray and lubrication system Variable speed head Heavy cast iron industrial construction Machine is in good used workshop condition with normal cosmetic wear from industrial use. It is complete and operational. Ideal for engineering shops, maintenance departments and production work. Hsdjy R Ebnepfx Apnofg Loading available on site. Transport can be arranged. Viewing welcome. Open to sensible offers.

Condition: used, Gebr. Thiel Duplex 159 Universal Milling Machine with DRO High quality German-built Gebr. Thiel Duplex 159 universal milling machine in good used industrial condition. Precision toolroom machine fitted with Newall digital readout (DRO), swivel vice and universal milling head. Well regarded for accuracy, rigidity and versatility, these machines are ideal for toolrooms, precision engineering, prototyping, maintenance workshops and general machining applications. Machine Details: Manufacturer: Gebr. Thiel GmbH Model: Duplex 159 Universal milling machine 380V 3 phase Newall DRO fitted Swivel machine vice included Universal adjustable milling head Horizontal and vertical milling capability Coolant tray and lubrication system Features: Hfodpfx Aoy R D E Espneg Precision table feeds Heavy cast iron construction Fine feed controls Toolroom quality machine Ideal for precision engineering work Condition: Good used workshop condition with normal cosmetic wear for age. Machine is complete and operational. A highly sought after universal milling machine with excellent build quality. Loading available on site. Transport can be arranged. Viewing welcome. Open to sensible offers.