Pillar Drilling Machine

MAXION BS 35 AVST G

Condition: new, Year of construction: 2006, bore capacity in steel (diameter) 35 mm throat 280 mm bore stroke 150 mm spindle taper MT MK 4 thread cutting attachment M 30 table-size 550 x 400 mm spindle turning speed - stepless 80 - 1.400 U/min feed range - boring 0,1 / 0,2 / 0,3 mm/U voltage 400 V total power requirement 1,3 / 2,3 kW weight of the machine ca. 400 kg dimensions of the machine ca. 0,70 x 0,80 x 1,95 m Lhsdpfxsy Ehwzs Ah Sjn - Serial No.: 186367 - Excellent condition! - Automatic vertical feed - Threading unit Max. threading capacity: M30 - Reversible motor Speed 1: 80 – 700 rpm Speed 2: 160 – 1.400 rpm - Quick-action drill chuck ALBRECHT 1–13 mm - Coolant system

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min Lsdpfx Ahsudi Unj Sehn VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drill spindle holder MK 2 - Drill spindle stroke with fine drilling depth adjustment 76 mm - Pneumatic feed unit PV 12 - throat depth 670 mm Lodou Aq Amspfx Ah Sohn - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: new, Fastech 3-Roll Round Bending Machine FRM 1050 x 90 Technical Specifications: Lsdpfxjhzq Dbe Ah Sohn Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1050 mm Sheet metal thickness 3.3 mm max. Sheet metal thickness for pre-bending 3.0 mm Roll length 1050 mm Roll diameter 90 mm Smallest bending diameter 130 mm Weight 475 kg Dimensions L-W-H 1750 x 800 x 1130 mm Motor: 1.1 KW Equipment: Top and bottom rolls, electrically driven Top roll can be pivoted out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: used, Wall-mounted slewing crane DEMAG type KBK 2 Demag boom no.: KBK-982 040 44 Lhjdpjtqwrvefx Ah Sen Demag wall bracket no.: 85104044 Year of manufacture: 2000 Load capacity: 500 kg Jib length: 4000 mm Slewing range: 270° Wall mounting plate: 1170 x 440 mm Height lower edge of boom to upper edge of wall bracket: 1000 mm Flange plate of wall bracket to centre of pin: 270 mm Total length from flange plate of wall bracket to tip of jib: 4330 mm - Jib profile: DEMAG KBK 2 C-profile rail - Trolley for DEMAG KBK 2 C-profile rail - Original yellow paint Net weight: 170 kg Very good condition Price without chain hoist – chain hoist or crane can also be found in our shop.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer Ljdpfx Ahsrkmv So Sehn * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Ljdpfsm Rpy Rox Ah Sshn The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2008, Technical details: batch weight: - total volume: 600 l external diameter: 1716 mm Effective volume: 345 l Work tank width: 1616 mm max. workpiece size: 270 mm revolution per minute: 980 - 1460 U/min total power requirement: 6 kW weight of the machine ca.: 1600 kg dimension machine approx.LxWxH: 2,4 x 1,7 x 1,44 m Lhjdpfx Aszdnlajh Ssn height: 3,42 m This machine was never operated with abrasive grinding media and therefore shows very little wear. The polyurethane lining is in excellent condition. The Walther Trowal CB 600 offered for sale was used exclusively for the treatment of stamped metal parts. The parts were processed in a dry finishing process using corn cob granulate, whereby they were conveyed through the media. The purpose of this process was to condition the surface of the stamped parts in such a way that sticking together during subsequent stacking was reliably prevented. The machine was used exclusively for this application and operated only in dry mode with corn cob media. Walther Trowal CB 600 The Walther Trowal CB 600 is an industrial circular vibratory finishing machine with a gross capacity of 600 liters. Suitable for: ·Deburring ·Edge radiusing ·Grinding ·Surface smoothing ·Polishing ·Descaling ·Cleaning metal parts Typical workpieces: ·Turned parts ·Milled parts ·Stamped parts ·Cast parts ·Forged parts ·Gears Machine can be demonstrated under power. i.D. *

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece Lsdpfx Aoxacbueh Sjhn - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Year of construction: 2017, condition: ready for operation (used), A compact Walther Trowal vibratory finishing system is available. 1) Walther Trowal ZM 03-FL process water treatment system, Year of manufacture: 2017, Throughput: approx. 1000l/h, Drum capacity: 14l, Acceleration: 2012g, Wastewater tank: 300l, Process water tank: 150l, Compound savings: 90%, Water savings: 98%, Machine dimensions X/Y/Z: approx. 1400mm/1200mm/1750mm, Weight: approx. 600kg, Control system: PLC. 2) Walther Trowal MV 21 vibratory finishing machine, Year of manufacture: 2017, Max. usable capacity: 130l, Ceramic media/plastic media filling capacity: 230kg/150kg, Max. workpiece dimensions diagonal: 570mm, Speed: 3000rpm, Working bowl diameter: 616mm, Working bowl depth: 470mm, Machine dimensions X/Y/Z: approx. 1250mm/1050mm/1200mm, Weight: approx. 900kg, operating hours: approx. 913h. Documentation available. An on-site inspection is possible. Lhjdpezkldtofx Ah Son