Used Bachofen 30 L/Min for sale (84,375)

Condition: excellent (used), Year of construction: 2007, BACHOFEN Turbula T2F Shaker Mixer The mixing container is set in three-dimensional motion, subjecting the material to alternating, rhythmically pulsating movements for intensive mixing. Max. volume: container with 2 L capacity Predpfxsyc R Nyo Aazeb Container dimensions: approx. Ø 130 mm x 215 mm Speed is adjusted via a stepped pulley. Manufacturer: Willy A. Bachofen GmbH Year of manufacture: 2002 Space requirement: 50 x 60 x 40 cm

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, Only 2 units available! Aerzen VM 30 screw compressor Used to pneumatically unload railway cars. Manufacturer: Aerzen Type: VM 30 Volumetric flow rate: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Compressor speed: 12874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C Cooling of the compressed air is done with water via a shell and tube heat exchanger. Year of manufacture: 1998 Dimensions: Length: 2800 mm Width: 1150 mm Height: 1770 mm Weight: approximately 2750 kg Operating hours: Compressor 1: 28109 hours Compressor 4: 28973 hours Regular service was performed by a specialized service company! Not operated since 2019. Have been stored in a dry and heated location since then. Podporkpp Hefx Aazorb

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 930853, WAB Turbula T2C from 1993. Prsdpfx Aaoz Dx N Tezjb The mixer is in very good condition and was serviced by WAB in August 2026. During the service, the circular belts, flat belts, both tensioning pulleys, and the rubber tensioners were replaced with new ones. In addition, the following items are included as new: - 1 set of black rubber tensioners - 2 sets of red rubber tensioners (for heavier loads) - 1 mixing container, 1 liter - 1 mixing container, 2 liters Furthermore, the original operating manual from WAB and the maintenance log from 08/26 are included.

Condition: new, For sale is a new industrial submersible coolant pump from Speck, model T-602-170.0024, with a three-phase electric motor. The pump is from 2023. The condition of the unit and the scope of delivery are shown in the pictures. Technical data of the pump: Manufacturer: Speck Model: T-602-170.0024 ID: 56819 Serial number: 1002695075 Maximum flow rate: 60 l/min Maximum head: 58 m Pump speed: 2800 rpm Year of manufacture: 10/2023 Technical data of the motor at 50 Hz: Power: 1.0 kW Voltage: 400 V (star) / 230 V (delta) Current: 2.3 / 3.9 A Speed: 2850 rpm Power factor cos φ: 0.78 Efficiency class: IE3 Rated efficiency: 82.3% Prjdpfx Ajzvln Ajazsb Other data: Three-phase motor Degree of protection: IP54 Insulation class: F (155°C) Mechanical size: BG71 Mounting position: IM V8 Standard: IEC/EN 60034 Motor number: 1800.1192 The pump being sold and its condition are as shown in the pictures.

Condition: good (used), Year of construction: 2004, functionality: fully functional, operating hours: 39,000 h, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, total height: 5,600 mm, total length: 9,000 mm, overall weight: 6,000 kg, controller model: Heidenhain Mill Plus IT, For sale is a 5 axis machining center of the Makre DMU and type 50 eVolution Please note the GMN high frequency spindle spindle HCS 30.000 /15 and the 92-fold tool changer The machine is in good condition and fully functional Technical data Year of construction: 2004 Operating hours: approx. 39,000 h Control system: Heidenhain MillPlus IT Table size: approx 500 mm ⌀ Psdpotyit Eefx Aazerb Traverse paths: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0-180° C-axis: 360 ° Tool holder: HSK 50 Spindle speeds: max: 30,000 1/min Frequency: 500 Hz Power: 15 kW Tool places: 92 NO chip conveyor Space requirement according to drawing: 9,000*5,600 mm Transport dimensions: 2,800*3,700*2,800 mm Weight: 6,000 kg On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Fzho0bc Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: excellent (used), Year of construction: 2005, Technical specifications: Working length: 3100 mm Podpfjv I Sp Ijx Aazerb Column width: 2650 mm Press force: 100 tons CNC control: AMADA AMNC PC 3D-graphic 15-inch TFT color screen Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Dual speed of the X, R, and Z axes Automatic crowning Motorized adjustable backgauge Thrust: 550 mm Stroke: 350 mm Working height: 960 mm Laser monitoring: FIESSLER Motor power: 9 kW Dimensions (length x width x height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Accessories: 1 set of segmented AMADA tools The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025/002, Finger jointing machines and lines are a masterpiece of woodworking industry >wood entry lengths 900 to 6100 mm< >wood rests and tools drive< >Best tooth milling quality and optimized cutting speed< >Long service life of the milling tools / dovetail cutters< -MINDA - MACH I (patented) -High performance finger jointing line -for KVH / DUO / TRIO / BSH / GL / CLT -technical running meters capacity = approx. 150 m/min -vertical and horizontal joints possible max. 200 x 300 mm -extremely flexible; short set-up times; reliable operation Prjdpjcbyp Njfx Aazeb The only package system in the world that can also process a single board or single beam. -finger jointing machine, for vertical and horizontal milling, zinc profiles, made in Germany, along with new developments in the clamping stations and the transfer channel on the router table, has the Joema MACH I include a groundbreaking benefits, fast pace. Together with 1200 mm milling channel at 40 mm Thickness technical power meter = approx 150 meters /min, very reliable material transport - No vulnerable conveyor rollers, flaps and cross conveyors - high availability - for all sections including square suitable - by fully automatic, continuous channel matching is possible in extreme cases single mill - thus the system is extremely flexible, vertically horizontally and zinc profiles possible performance with KVH 160 x 280 mm are 38 meters / min, with KVH 100 x 300 mm, 64 meters / min, at BSH 45 x 250 mm are 110 meters / min, >>cutting-edge technology simply kept

Condition: good (used), Year of construction: 1996, Fuel gauge, oil pump, oil dispenser, oil station, fuel pump, tank data acquisition, tank system display, oil cabinet, fresh oil pump Psdpfx Aaow A Nddszerb -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 -Flow rate: 1 to 10 l/min -Motor: Hanning 0.55 kW -Pressure vessel: Volume 2.8 liters -Individual components: see photos -Quantity: 1x oil cabinet available -Price: per piece -Dimensions: 500/480/H250 mm -Weight: 19 kg/pc.

Condition: new, For sale: a new, unused submersible pump for coolants, brand Speck, model TM-401-110.0005. The pump is designed for cooling systems, machine tools, and other industrial applications. Technical data: Manufacturer: Speck Model: TM-401-110.0005 ID number: 34206 Serial number: 1002283768 Year of manufacture: 10/2021 Power: 0.5 kW Maximum flow rate: 40 l/min Maximum head: 38 m Power supply: three-phase Frequency: 50 Hz Voltage 380 V: 1.35 A, 2820 rpm, cos φ 0.73 Voltage 415 V: 1.55 A, 2850 rpm, cos φ 0.61 Protection rating: IP54 Prodpfx Aezvh Aieazjb Insulation class: F (155)

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, The CE15 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. Similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz Pjdpfx Ajhf Na Ssazorb CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.

Condition: ready for operation (used), Year of construction: 2015, overall weight: 700 kg, load capacity: 16 kg, arm reach: 3,102 mm, number of axes: 6, This 6-axis KUKA KR 30 L 16-2 robot arm was manufactured in 2015. It features a payload capacity of 16 kg and a reach of 3,102 mm, making it suitable for various robotic handling applications. With 4 units available, each comes with a optional teach panel, KR C4 control unit, and cable set. If you are looking to get high-quality robotic handling capabilities, consider the KUKA KR 30 L 16-2 machine we have for sale. Contact us for further details. Pjdpfx Aaozd Tgpjzerb • 4 units available • Application Type: Robotic Handling / Material Handling Robot • Controller: KRC 4 • Payload Capacity: 16 kg • Max Handling Weight: 16 kg • Reach: 3,102 mm • Weight: 700 kg • With teach panel, KR C4 control unit, cable set (optional)

Condition: excellent (used), For sale: Professional fire pumps PFJ (PFJ Pumpen und Feuerlöschtechnik GmbH, Germany), model TS 8/8 DIN 14410. ⚙️ Technical Specifications: Model: TS 8/8 DIN 14410 Flow rate: 800 l/min Operating pressure: 8 bar Nominal speed: approx. 2725 rpm Year of manufacture: 2 units – 1993, 32 h, 98 h 1 unit – 1997, 164 h Weight: approx. 162 kg Manufacturer: PFJ GmbH Jöhstadt – Made in Germany 🔧 Technical Condition: Pumps are operational, start and run smoothly Normal signs of use (scratches, scuffs – visible in photos) Used equipment, but in good technical condition Complete as shown in the pictures 📦 Included: Petrol pump Control panel Lighting All components shown in the photos 💡 Applications: Fire brigade / Volunteer fire department Water drainage Industrial and construction works Fire protection systems Prjdpfxjyyxiws Aazjb ℹ️ Additional Information: Price is for 1 unit Possible to purchase the complete set Shipping available

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels Prjdpsu R A Dlefx Aazob *

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, KONICA MINOLTA ACCURIOLABEL 230 Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Production Speeds Depending on substrate: • 23.4 m/min • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller • Operator screen • Direct PDF printing from USB stick possible • Patlite LR4-PP signal tower _____ UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with: • Overprint Kit with impression / registration sensor This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Podpfx Aaezx Ri Dozsrb Included:

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Pjdpfeyxy D Tex Aazjrb Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Flow rate: 15–35 l/min Head: 23–31 m Frequency: 50 Hz Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Prsdpfx Aaezn N Auozsb Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F

Year of construction: 2010, condition: like new (used), functionality: fully functional, MFT 30/300S Set – Used Professional Equipment For sale, a professional set in excellent condition, ready for immediate use. The set includes: MFT 30/300S Big Bag FAS 300 with mobile suction unit This set provides a complete solution, ideal for professionals seeking high-performance, robust, and operational equipment for use in a workshop or on a construction site. Pedpfjzncrpox Aazorb Optional: Rapid Vario 70 Primus available as an additional unit for an extra €2,600. The equipment has been carefully maintained, offering excellent value for money compared to new equipment. Sale as a set is preferred.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-pressure cleaner PTC CJ-2B, similar to but not an Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner… - Operating pressure: 130 bar - Flow rate: 32 l/min - Engine: Honda GX390 gasoline, 8.7 kW - Dimensions: 1160 x 580 x 710 mm - Dry weight: approx. 80 kg - High-pressure pump: Comet three-plunger pump with ceramic plungers - Robust steel frame - Practical holder for gun with lance - Pressure gauge - Built-in professional pressure relief valve - Manual stainless steel hose reel with 30 m high-pressure hose 3/8" + 10 m high-pressure hose 3/16" - 2 pieces of 3/8" and 1 piece of 1/8" F pipe cleaning nozzles - Gun with washing lance and flat jet nozzle The CJ-2B is a professional mobile high-pressure cleaning unit, ideally suited for cleaning and removing blockages in pipes with diameters from 40 to 200 mm. It is ideal for cleaning and removing blockages in house connections, septic tanks, cisterns, and industrial waste pipes. The powerful Honda engine with an output of 8.7 kW and the Comet TW Premium pump with speed control guarantee the highest performance and reliability over time. This unit provides the optimal solution for professionals seeking an efficient and powerful machine that can handle the most demanding work situations, thanks to its robust steel frame and large pneumatic tires. Prodpfsgigqxox Aazeb

Condition: used, Year of construction: 2002, operating hours: 16,767 h, lifting height: 4,750 mm, fuel type: electric, mast type: triplex, battery manufacturer: R&W, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, Year of manufacture: 2002 Empty weight: 5.530 kg Lifting capacity: 3.000 kg Number of valves: 3 CE mark: yes General condition: average Technical condition: average Visual appearance: average Mast type: triplex Prjdjzv N Akspfx Aazjb = Additional options and accessories = - 3rd valve - Battery charger = Remarks = = Additional options and accessories = - Free lift - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 Reconditioned: Yes Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, PTC Torpedo hot water unit 140°C and steam unit 140°C/32 bar, skid-mounted, similar but without Dynajet, Oertzen, Falch, DIBO, etc. Prodpfx Aaofdvldszeb - Skid mounted on a hot-dip galvanized frame with forklift slots. The following hot water models are available: Torpedo 23/250 | 23 l/min. at 250 bar | Engine: Kohler KDW 1003 26 kW Torpedo 23/350 | 23 l/min. at 350 bar | Engine: Kohler KDW 1404 26 kW - Dimensions with 680 l water tank: 2,300 x 1,310 x 1,310 - Dimensions with 1000 l water tank: 2,300 x 1,310 x 1,630 - Unladen weight: approx. 600 kg - High-pressure pump: Comet RW/TW Premium - High-pressure hose reel: manual or automatic with max. 30 m. 1/2" or 50 m. 3/8" hose (included) - Water supply hose reel: manual with 50 m. 3/4" hose - Diesel tank: 75 l - Anti-scaling pump with tank - 80/100 kW heating module - Options and accessories available upon request.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, working width 300mm working height 140mm feeding rate 200m/min spindles speed 6000 RPM spindles diameter 50mm spindles set: Prodpfx Aajz Af Rwjzeb 1. bottom - 22kW 2. top - 22kW 3. right - 18,5kW 4. left - 18,5kW 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW 9. top - 22kW 10. bottom - 22kW 11. bottom - 22kW Possibility to purchase the machine with feeder + EUR 14,900 net.

Condition: new, Year of construction: 2025, Ex-display model available immediately: COMPRESSED AIR REFRIGERANT DRYER ALMIG ALM-DGO 78 Psdpfoz Dwtdex Aazsrb Model: ALM-DGO 78 Flow rate: 1.30 m³/min* Year of manufacture: 2025 Constant pressure dew point of +3°C to +5°C for maximum process reliability. Minimal pressure drop ensures immediate energy savings. Short start-up and response times guarantee rapid availability. Optimized heat exchanger design for maximum efficiency. Robust construction for reliable continuous operation. R513a refrigerant: efficient, environmentally friendly, and long-lasting. Compact footprint for space-saving installation. Max. operating pressure: 16 bar Max. inlet temperature: 70°C Min./max. ambient temperature: +5°C to +50°C Pressure drop: 0.14 bar Average power consumption: 0.29 kW Voltage/Frequency: 230V/50Hz Compressed air connection: 3/4" Dimensions (L x W x H): 364 x 432 x 486 mm Weight: 21 kg Convenient leasing options via our partner bank are available for new machines. Visit our showroom / retail store.We always stock a large selection of new and used compressors!

Condition: used, machine/vehicle number: 006467, Max. panel width: 1200 mm Max. panel length: 2500 mm Prodpfx Aoyhbk Eoazsb 90 degree transfer system: yes

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Prsdpfxezzlc Rs Aazjb Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: excellent (used), Double-side Sizing & Edge Banding - Independent Machine (1st &/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 12 Panels thickness (min/max) mm 8 - 100 Prodpfxstt Iuds Aazjb Working width (min/max) mm 240 - 3000 Numerical Control Power Control PC22 (Windows XP) Software woodCommander Adjustable feeding speed (m/min) 10 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) E34 Pressing rollers (revolver) both for straight and shaped edges (softforming) GL sextuple Edge coils supporting unit (No. of reels) 1 Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) 25 m/min (0°-30°) Fine Trimming Unit (2 x 0,55 KW) 0°-30° Corner-rounding unit FF12 (4 motors) WD70 20 m/min Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11