Used Bending Cell for sale (4,130)

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. Pjdoh U Rzgjpfx Adlogk LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: ready for operation (used), Year of construction: 1994, sheet width 2550 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 7.5 kW weight 4500 kg range L-W-H 5000 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) Podpoy Ez A Rsfx Adlsgk - Operating instructions (PDF)

Condition: used, SPECIFICATIONS Drilling capacity steel Ø 35 mm Drilling capacity cast iron Ø 40 mm Tapping M25 Spindle taper Mk 4 Pedpfxoy Hmprj Adlogk Spindle diameter Ø 60 mm Spindle travel 180 mm Max. distance spindle - table 80 mm Min. distance spindle - table 870 mm Floor / table area 700 x 600 mm Power 2.2 kW Spindle speeds / ranges 65 - 1750 VARIO rpm DIMENSIONS Length 1200 mm Width 800 mm Height 2400 mm

Condition: good (used), Used press brake / bending machine by Hyllus / Stokfleth 1320 x 2 mm Psdpfx Adsy A Hfxeljgk

Condition: used, functionality: fully functional, Year of construction: 2011, Used profile bending machine from SAF Podoy Atidepfx Adljgk Type: DS 60 HP Plus Shaft diameter: 50 mm 3 driven rolls Digital readout with program option 1 set of rolls for flat and box material Year of manufacture: 2011 (delivered 2014)

Condition: good (used), functionality: fully functional, Year of construction: 1994, 3 driven rolls Pgsdpfx Adsy An A Sslek Shaft diameter: 85 mm

Condition: used, functionality: fully functional, YEAR 1990 Power rating 15 kW Shaft diameter ø 120 mm Pedpfxsummkas Adlegk Roller diameter ø 400 mm Resistive moment Cm 333 Cm3 IPN capacity 240 x 106 mm Capacity HEB 120 x 114 mm Capacity Pipe wall thickness x Ø 139 x 5 mm Capacity flat 125 x 25 mm Hydraulic / Mechanical Hydraulic

Condition: good (used), Year of construction: 2009, Used bending press from Euromac Pgjdpfsyz Uw Tjx Adlek Model: Digibend 360 Capacity: 36 tons Including many tools Year of manufacture: 2009

Condition: used, sheet width 3355 mm Pgsdpfsyuql Sjx Adljk plate thickness 63,5 mm roll diameter 686 mm voltage 400 V total power requirement 150 HP weight of the machine ca. 95 t dimensions of the machine ca. 62 m

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel Podpfsxaawgsx Adlegk - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz Psdpfxoxabnte Adljgk total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, pipe diameter (max.): 127 mm, bending angle (max.): 182 °, bending radius (max.): 400 mm, mandrel length: 4,000 mm, overall weight: 16,000 kg, total length: 7,000 mm, total width: 2,200 mm, total height: 1,800 mm, input voltage: 400 V, type of input current: three-phase, feed length Z-axis: 4,000 mm, wall thickness: 5 mm, Equipment: documentation/manual, Capacity, Ø mm / 127 x 5 Radius, min./max. / 50/400 Pgjdpfxju Rf E Eo Adlsk Bending speed/repeatability / 40º/s. ±0,1° Mandrel length 4 000 Weight, kg 16 000 Motor kW / 40 Length feed 900 mm/sec Degree of tolerance 0.05-0.1°/mm Tools: 63 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: M961316, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Herber, controller model: CNC 4, pipe diameter (max.): 20 mm, pipe length (max.): 3,000 mm, bending angle (max.): 190 °, bending radius (max.): 120 mm, bending radius (min.): 15 mm, working width: 3,000 mm, number of axes: 3, working height: 750 mm, table length: 4,500 mm, table width: 1,350 mm, table height: 750 mm, overall weight: 1,300 kg, input voltage: 400 V, input current: 16 A, input frequency: 60 Hz, type of input current: AC, operating pressure: 120 bar, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, The machine is in very good condition and is serviced regularly. Pgsdpfsw Snm Ijx Adljk

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes Pgedpfx Aoxacdvodljk * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine Pgjdpfjx Nfhrox Adljk -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8" to 3" -Stroke: 320 mm -Motor: AEG 1.5 kW -Accessories: incl. bending jaws up to 2,5" (see photos) -Transport dimensions: 1140/1045/H1200 mm Total weight: 389 kg

Condition: new, pressure 28 t piston stroke 180 mm diameter of piston 130 mm table-size 300 x 550 mm working feed 2 - 9,8 mm/sek return speed 20 mm/sec Max. pressure 200 bar bending capacity - flat iron 200 x 10 mm weight of the machine ca. 800 kg dimensions ca. 1150 x 1103 x 750 mm Pedpeqzmgqofx Adlogk The horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles. With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your needs in cold metal working processes.

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Psdsw Hx Tvopfx Adlsgk Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm.

Condition: good (used), Brand Boschert Model EL 500 Digital Year of construction 2009 Pjdpew Hyc Sefx Adlegk Press force 28 tons Throat depth 180 mm Punching capacity 40 mm in 6 mm Worktable size 500x1000 mm Number of strokes 180 pcs Dimensions 2400x1580x1540 mm Weight 2000 kg Power 5 kW

Condition: new, Year of construction: 2026, functionality: fully functional, Servo PANEL BENDER FBC 2516 CNC sheet metal bending machines offer high flexibility, efficiency, precision, and a high level of automation. They are suitable for processing enclosures, doors, and other components. These machines are widely used in sectors such as kitchen appliances, control cabinets, power electronics, elevators, and more. Technical specifications: Pjdpfx Adsyvzq Aelegk - Automatic tool change - Bending length: 2500 mm - Maximum sheet width: 1500 mm - Maximum diagonal length: 2800 mm - Maximum bending height: 165 mm - Maximum material thickness: stainless steel 1.2 mm / aluminum 3 mm / mild steel 2 mm - Minimum sheet thickness: 0.35 mm - Possible bending angles: 0°-180° - Inside radius: 0.8–1.2 mm - Dimensions: 5.4 m x 4 m x 2.9 m - Weight: 19,500 kg - Control: Beckhoff This machine will be exhibited at Euroblech 2026 in Hannover and will be available from October. We have been distributing YAWEI machines throughout Europe for over 20 years. Service and spare parts supply by H+S – everything from a single source.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 64,000 h, machine/vehicle number: S1631C0027, laser hours: 40,000 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium TRUMPF 3D laser cutting system, fully maintained and immediately ready for production. Ideally suited for applications in the automotive and aerospace sectors, as well as general metalworking, this machine is perfect for precision 3D contour cutting of tubes, hydroformed components, and complex profiles. Machine Overview Model: TRUMPF TruLaser Cell 8030 Year of Manufacture: 2015 Laser Source: 3,000 W TRUMPF (CO₂ / solid-state – to be verified upon inspection) Operating Hours: 70,000 h total / 41,125 h laser-on time Condition: Fully functional, currently in serial production Service History: Regular annual maintenance exclusively by TRUMPF – full service documentation available Key Benefits • 5-axis CNC for high-precision, demanding 3D geometries • Fully enclosed, automation-ready working area • Proven reliability for both high-mix/low-volume and medium series production • Genuine TRUMPF quality – Made in Germany • Continuous OEM service record – no third-party interventions What Sets Us Apart: Modular Handover, More Than Just a Machine Sale We are not equipment brokers but actively operate a laser job shop (SOERMEL Groupe, France – 65 employees, €12M annual turnover, IATF 16949 / EN 9100 / ISO 9001 certified). Our buyers profit from our application expertise through four tailored service modules – select the support level that best matches your project: Modular Service Packages M1 – Ex Works Machine handover at our site, loaded onto your transport vehicle. Comprehensive testing prior to delivery. Ideal for buyers with their own rigging and installation capabilities. M2 – Delivered Psdpfx Aoukhltjdlegk M1 plus international freight, insurance, and unloading at your premises (DAP/DDP terms available upon request). For customers with in-house installation teams. M3 – Delivered & Installed M2 plus mechanical installation, utility connections, initial commissioning, and laser calibration. For buyers without dedicated installation resources. M4 – Turnkey Solution M3 plus full commissioning, process validation on your components, operator and maintenance staff training, and acceptance protocol. For those who want the system up and running from day one. Pre-purchase on-site inspection and sample processing of your test parts is welcome at our facility in France.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 70,000 h, machine/vehicle number: S1631C0047, laser hours: 38,125 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium TRUMPF 3D laser cutting system, fully maintained and immediately ready for production. Ideally suited for applications in the automotive and aerospace sectors, as well as general metalworking, this machine is perfect for precision 3D contour cutting of tubes, hydroformed components, and complex profiles. Machine Overview Model: TRUMPF TruLaser Cell 8030 Year of Manufacture: 2015 Laser Source: 3,000 W TRUMPF (CO₂ / solid-state – to be verified upon inspection) Operating Hours: 70,000 h total / 41,125 h laser-on time Condition: Fully functional, currently in serial production Service History: Regular annual maintenance exclusively by TRUMPF – full service documentation available Key Benefits • 5-axis CNC for high-precision, demanding 3D geometries • Fully enclosed, automation-ready working area • Proven reliability for both high-mix/low-volume and medium series production • Genuine TRUMPF quality – Made in Germany • Continuous OEM service record – no third-party interventions What Sets Us Apart: Modular Handover, More Than Just a Machine Sale We are not equipment brokers but actively operate a laser job shop (SOERMEL Groupe, France – 65 employees, €12M annual turnover, IATF 16949 / EN 9100 / ISO 9001 certified). Our buyers profit from our application expertise through four tailored service modules – select the support level that best matches your project: Modular Service Packages M1 – Ex Works Machine handover at our site, loaded onto your transport vehicle. Comprehensive testing prior to delivery. Ideal for buyers with their own rigging and installation capabilities. M2 – Delivered M1 plus international freight, insurance, and unloading at your premises (DAP/DDP terms available upon request). For customers with in-house installation teams. M3 – Delivered & Installed M2 plus mechanical installation, utility connections, initial commissioning, and laser calibration. For buyers without dedicated installation resources. M4 – Turnkey Solution M3 plus full commissioning, process validation on your components, operator and maintenance staff training, and acceptance protocol. For those who want the system up and running from day one. Pre-purchase on-site inspection and sample processing of your test parts is welcome at our facility in France. Pedpfx Ajy E Iv Redlsgk

Condition: like new (used), For sale: 2 new electrostatic filter cells and 1 used unit by Bristol, suitable for the B 500 EF type. Filter area: 3 m^3 Plate spacing: 6 mm Cell weight: 5 kg Transport and loading can be organized throughout Europe for an additional charge, if desired. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team looks forward to assisting you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MUCH MORE. Are you looking for a high-quality but affordable machine for your production? Or would you like to sell yours? Pjdpfey H H Eaox Adlogk For further information or contact options, please reach us via the contact form.

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons Pgedpjv Htniefx Adlek The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Year of construction: 2017, condition: used, Serial No. 15-6139B, CNC control with touch display, indexing feed conveyor, robot by Yaskawa, type YR-MH00012-A00, year 2011, robot controller DX200, Teach-in terminal, box unloading section, L 7,000 mm, switch/control cabinets, plexiglass enclosure, peripheral units, machine accessories. Subject to prior sale. Pjdpey A In Ujfx Adlsgk

Year of construction: 2016, condition: used, Serial no. 15-3599B, primarily comprising: feed station with 2 product lines, continuous cycle conveyor, 2 forming stations, turning station, micro-lubrication station, through-feed washing machine, Manufacturer: Bous, Model: Duwamat K1000 WSST, Year: 2016, Serial no. 2800, 3 tanks, tank capacities: 485/485/715 l, heating capacity 16–24°, fine filter, oil separator, control cabinets, system control with operator panel, Manufacturer: Siemens, Model: SIMATIC HMI touch, inspection system with 2 cameras, Manufacturer: KEYENCE, Model: Vision System, eddy current testing device, Manufacturer: Rohmann, Model: Elotest IS500, laser marking system, Manufacturer: Videojet, Model: 7510, fiber laser, laser power 50 W, discharge station, roller conveyor system for crate removal, 2 product lines, satellite terminals, switch cabinets, safety devices, plexiglass enclosure, peripheral units, including extraction system, Manufacturer: ESTA, Model: Whispersog 2.2 JET, overnut feeder with loading bunker, vibrating bowl feeder, separation unit, loading station, set of trolleys, set of load carriers, trolleys. Subject to prior sale. Pgsdpfoy A Ih Uox Adlek