Used Bomar Ergonomic 290.250 Gae for sale (1,106)

Condition: used, Powder coating booth with filter cart & fluidized bed For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. This is the proven MRS system (Multi-Recovery System), which ensures highly efficient powder recovery (overspray extraction) and clean working conditions in the workshop. The system is extremely robustly built and, thanks to the generous manual coating opening, is ideally suited for manual operation (hand coating). Technical data & connection values: Dedoz N Aivopfx Al Sewc • Manufacturer: Gema Volstatic AG • System / Type: MRS booth with filter cart and fluidized bed • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase) • Compressed air connection (input pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: Water vapor content max. 1.3 g/m³, oil content max. 0.1 ppm • Compressed air consumption (filter plate cleaning): max. 18 Nm³/h • Fan output of the cleaning unit: • For organic powders: Depending on the number of filter plates, from 7.5 kW to 15 kW (volume flow up to 12,000 m³/h) • For enamel powder: From 5.5 kW to 11 kW (volume flow up to 8,800 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) to 4.5 kPa (at 12000 m³/h) Dimensions & space requirements: • External dimensions of the booth: approx. Length 6.30 m × Width 2.52 m × Height 3.20 m • Internal dimensions of the booth (working area): approx. Length 6.00 m × Width 1.73 m • Dimensions of the platform: approx. Length 7.64 m × Width 2.45 m × Height 1.16 m Equipment & components: • Booth housing: Solid construction including booth inlet and booth substructure • Filter cart with fluidized bed: Excess powder is drawn downwards The fluidized bed converts the powder into a liquid-like state using compressed air, so that it can be directly reprocessed and reused in the cycle (enormous material savings!) • Cleaning unit: Unit mounted on top, including solenoid valve cover and sealing frame • Safety & control: Integrated pressure monitoring and pneumatic monitoring via the side control unit • Ergonomics: Hand lever valve for easy control directly on the booth, large manual coating opening for the operator, and gun travel slots on the back • CO₂ fire suppression system (fire protection system) Item location: 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important collection & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer on site. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500 net (plus VAT). "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2009, operating hours: 7,860 h, functionality: fully functional, total length: 2,160 mm, total width: 1,110 mm, total height: 1,600 mm, overall weight: 2,600 kg, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, We offer this used Officine Monzesi Monza 410, manufactured in 2009. MONZESI Monza 410 CNC 1 centerless grinder High-precision machine in excellent working condition, available for inspection under power. Ideal for high-volume precision grinding (automotive, medical, aerospace, or micro-technical components). The original configuration of this machine made it possible to perform micrometer-precision machining of highly sensitive parts (sapphire disks). 🛠️ Key Technical Specifications • Workpiece capacity (external diameter): From 3 to 100 mm. • Maximum plunging/traverse length: 200 mm • Grinding wheel: Max. external Ø 406 mm | Max. standard width 200 mm | Motor power 15 kW (1560 rpm). • Drive wheel: Max. external Ø 254 mm | Max. standard width 200 mm | Brushless servomotor 3.9 kW, variable speed (5 to 285 rpm). • X-axis (Slide Feed): Satellite roller screw (Ø 32 mm, pitch 5 mm) driven by a 6 Nm digital servomotor with a direct optical scale for absolute micrometer precision (programmable minimum increment of 0.0005 mm). Dedpfxoz Ernle Al Sewc 💻 Numerical Control & Automation • CNC: FANUC Power Mate iD digital with Fanuc motors and actuators. • Operator interface: Color touchscreen with graphical pages designed for quick and easy operation. • Electronic precision: Programmable minimum increment of 0.0001 mm. • CNC advantages: Absolute encoders (pulse coders) eliminating the need for referencing at start-up, statistical management of the X-axis with programmable automatic compensation for grinding wheel wear. 📦 Included Accessories and Peripherals The machine is sold with its original equipment and essential workshop accessories: • Oil mist extraction: AR FILTRAZIONI model ARNO 1 VF system (max. flow rate 1500 m³/h) for pollution control in the work area. • Mechanical equipment: Blade holder for in-line operation, grinding wheel holder (Ø 203 mm), drive wheel holder, and static balancing devices and pivots for the grinding wheels. • Safety & Ergonomics: Full sliding protective enclosure compliant with CE standards, secured by automatic locking during wheel rotation, and equipped with internal lighting. • Complete original documentation: Installation, operation, and maintenance manuals, parts catalog, and complete electrical/hydraulic/pneumatic diagrams. (Note: Machine sold without its original fabric filter unit). 📝 Sales Terms & Logistics • Year of manufacture: 2008. • Condition: Very good condition, regular geometric cycles. • Inspection: Machine available for inspection in working condition and under power for testing. • Removal: Lifting, handling, loading onto a truck, and transportation are the sole responsibility of the buyer. (Provide lifting equipment suitable for the weight of the machine base: 2,600 kg excluding the electrical cabinet). • Price: CHF 30,000 (excluding VAT). Manufacturer: Officine Monzesi Model: Monza 410 Year of manufacture: 2009 Condition: Used Category ID: 26 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 500 050, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 82 Nm, controller manufacturer: Grundig / Heidenhain, controller model: MillPlus, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 50 mm, workpiece weight (max.): 200 kg, total height: 2,200 mm, total length: 2,200 mm, total width: 1,800 mm, table width: 500 mm, table height: 800 mm, table length: 700 mm, table load: 200 kg, rotary table diameter: 500 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 9,000 rpm, overall weight: 3,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, Deckel Maho DMU 50 T – CNC Universal Milling Machine (Year of manufacture: 1996) For sale is a well-maintained and fully functional CNC universal milling machine, the Deckel Maho DMU 50 T, equipped with the proven MillPlus control system. This machine is ideally suited for toolmaking, the production of single parts and small series, and for training workshops. Key features: Control system: MillPlus (Deckel Maho) Travel ranges: X = 500 mm / Y = 400 mm / Z = 400 mm Table: Swiveling rotary table for flexible 5-axis machining Spindle: SK40, up to 9,000 rpm Dwjdpfx Aez D Ab Tel Sjc Equipment: Full enclosure with sliding doors and ergonomic control panel Sales and transport conditions (Incoterms): Sales condition: EXW (Ex Works / Ex Location) Dismantling & Loading: Dismantling, removal from the building, loading, and transport must be completely organized and carried out by the buyer (at their own expense and risk). Dismantling can also be carried out for a fee. Various accessories included. The machine can be inspected on-site by appointment.

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, nominal power: 6 kW (8.16 HP), workpiece height (max.): 120 mm, workpiece width (max.): 780 mm, Q-Fin Topgrinder Year of manufacture: 2017 Maximum part width: 780 mm Part length: unlimited Dwjdpfxjz Nxmqj Al Sjc 2 stations for grinding or deburring, rotatable Manually guided grinding plates Mobile machine on rollers Benchtop grinding machine for deburring, grinding, and rounding the edges of sheet metal parts. Integrated vacuum pump for fixing the sheet metal parts to the machine table. Also suitable for small parts and long sheet metal strips. The side and front panels are magnetically held and can be folded down if required. Ergonomic operation via buttons on the handle. Used, in very good condition, with numerous accessories.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Dwjdsz Agv Ujpfx Al Soc - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, This listing is for the Hund Wetzlar H600/12 Microscope The unit is in full working condition and is ready for immediate use The Hund Wetzlar H‑600 series is a line of high-quality laboratory upright compound microscopes manufactured by Helmut Hund GmbH, a German optical instrument maker that later absorbed the traditions of Will Wetzlar—a well-respected older Wetzlar-based manufacturer These microscopes are tailored for laboratory, educational, clinical, and research use. They are known for their robust mechanical build, ergonomic design, and optical clarity—making them reliable and long-lasting instruments Key Features Across H‑600 Variants Here’s a breakdown of typical configurations and options in the H‑600 series: Feature Description Stand & Mechanics Solid cast‑iron tripod, coaxial coarse/fine focusing (fine ~2 µm), 160 × 130 mm mechanical stage, 5‑position ball‑bearing nosepiece . Dedpfx Alsxhfdze Sjwc Optics & Contrast Methods Supports brightfield, darkfield, phase contrast, and select models include incident fluorescence illumination Tube & Eyepieces Binocular tube, typically 30° viewing angle, with wide-field eyepieces (e.g., 10×/18 or 10×/20) Objectives Plan or achromatic objectives: 10×, 20×, 40× phase, and 100× oil immersion (numerical apertures e.g., 0.65, 1.25) Illumination Integrated 12 V / 30 W halogen lamp with continuous brightness control; some models also include HBO fluorescence or LED options Accessories Often include centering keys, filter sliders, spare bulbs/fuses, dust covers, and optional filters or conversion accessories .

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Dwsdpez Agw Esfx Al Ssc Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Dwsdpsz Ag Rrefx Al Sjc - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included Dwsdpfxoyr Aiws Al Soc 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: used, This listing is for Nikon Eclipse TS100 Inverted Routine Microscope The unit is in full working condition and ready for immediate use Objectives: Objectives are 4x/0.10, Phase 1 10x/0.25, Phase 1 20x/0.40 Eyepieces: CW10XB/22 Includes an epi-fluorescence attachment (TS100-F, lamp house, filter cube) UK Power Supply Included Lat serviced by K-tec Microscope services on 20th March 2025 This inverted routine microscope is a high-quality lab instrument manufactured by Nikon (Model: Eclipse TS100). Renowned for its crisp optics and ergonomic design, making it a standard for cell culture inspection and routine lab tasks. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Dwjdpfx Aljzqf Ire Sec Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. Dedozz Rpcjpfx Al Sowc - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, This listing is for the ICN Biomedicals Flow Gelaire BSB Class 2 Safety Cabinet The unit is in full working condition and is ready for immediate use Gelaire Class II Biological Safety Cabinets These are widely used internationally and are known for their high safety, energy efficiency, and ergonomic design. Key features include: Airflow & Protection They employ part-recirculating laminar airflow and separate H14 HEPA systems for both supply and exhaust. The design ensures a consistent air barrier at the front opening and maintains sterile downflow inside, all within a biodynamic sealing system that uses negative pressure around any positive-pressure zones. Eco® Control System Dsdpfxjxhfpqs Al Sewc A smart microprocessor actively regulates airflow to compensate for filter loading, manage power consumption, and maintain safe operational flow rates. Monitoring & Safety Alarms Cabinets offer real-time display of airflow velocities, internal and external temperatures, operation hours, filter life, and fan power factor. Audible and visual alerts warn of airflow deviations or other malfunctions. Standby power-saving modes and “blackout” reporting (in the event of power failure) are included. Construction & Ergonomics The housing features antimicrobial powder-coat finish, and interior zones are stainless steel (Type 304 for work zones, Type 316 for the tray). Hinged or electric sash options (depending on model) and ISO-aligned ergonomic design, noise under 60 dB(A), and smooth operation are standard. Options & Accessories Available extras include gas and vacuum taps, splashproof power outlets, UV germicidal lamps, different exhaust configurations (top, left, right), adjustable stands, carbon exhaust filters, armrests, and fumigation seals.

Year of construction: 2023, condition: like new (used), functionality: fully functional, ESCO Airstream Gen 3 Vertical Laminar Flow Cabinet Type: LVG-3AG-F8 Dwedpfxoz D Tkfe Al Ssc Airstream Gen 3 Vertical Laminar Flow Cabinet While others rely on traditional PSC motors, the Esco Airstream® Gen 3 Vertical Laminar Flow Cabinet is the only vertical-type clean bench in the market that uses Direct Current Electronically Commutated Motor (DC ECM) technology. Reducing energy costs by up to 70%, these clean benches are the greenest ones yet. The secret to achieving energy savings through ECM technology lies in its high electrical efficiency and ability to run precisely on programmed speeds. Enjoy low heat and noise emission as well with the Esco Airstream Gen 3 Vertical Laminar Flow Cabinet. Esco's laminar air flow cabinet is a product of robust engineering combined with strategic ergonomic design. It provides long-term reliability and ultimate user comfort making it ideal for non-hazardous applications that need a sterile environment

Condition: used, This listing is for the Mettler Toledo Seven Excellence Multi parameter Metre plus P25 Printer The unit is in full working condition and is ready for immediate use The METTLER TOLEDO SevenExcellence series includes a line of advanced benchtop meters designed for high-precision electrochemical measurements. These meters are ideal for applications in pharmaceuticals, food and beverage quality control, and environmental testing. Key Features Across the Series Measurement Capabilities: Models support pH, conductivity, resistivity, redox/ORP, TDS, salinity, ISFET, ion selective electrodes (ISE), and dissolved oxygen (DO). User Interface & Workflow Optimization: Large touchscreen display for intuitive, efficient navigation. Plain language menu structure eliminates confusion during setup. Dsdpfxoxhgdpo Al Sjwc One-click operation launches one of 17 predefined or 60 customizable methods, boosting throughput. Choose from uFocus™ view, which displays only critical data, or standard view for detailed information including setup and measurements. Data Management: Export results to printers, Excel, or LIMS. Compatible with LabX software for 21 CFR Part 11 compliance and advanced data control. Time and date stamps from a radio-controlled clock ensure compliance with GLP standards. Security & Compliance: User management settings and PIN protection prevent unauthorized method changes. Integrated Sensor Management (ISM®) pH electrodes are automatically recognized and retain their own calibration data—ensuring accuracy even when electrodes are swapped. Modular and Ergonomic Design: Electrode arm enables easy one-handed operation and precise vertical movement to reduce spills and save time. Modular construction allows for easy upgrades and expansion as your lab's needs change. Connectivity options include USB, Ethernet, and RS-232 ports for integration with PCs and peripheral devices.

Condition: used, This listing is for the Binder BF115 UL Incubator / Oven The unit is in full working condition and is ready for immediate use BINDER BF 115 UL – Forced Convection Incubator The BINDER BF 115 incubator from the Avantgarde.Line series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: Dodoxhfz Hspfx Al Sjwc ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights APT.line™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Power Supply 120 V, 12.5 A fuse (NB At this time we also have in stock 230 V See BF115) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: used, This listing is for 1 of 3 Hamilton Microlab 600 series dual syringe dispenser The units are in full working condition and ready for immediate use General Description The Hamilton Microlab 600 Series Dual Syringe Dispenser is a semi-automated liquid handling system designed for laboratories requiring high-precision, high-accuracy fluid transfers. Built on Hamilton’s world-renowned syringe technology, it leverages positive-displacement mechanics to ensure consistent performance across a broad range of fluid viscosities and characteristics. Semi-Automated Liquid Handling With a simple touch of the hand probe button or an optional foot switch, users can actuate the dual precision syringe drives to aspirate or dispense exact fluid volumes. This ergonomic control reduces hand fatigue and enhances repeatability in routine workflows. Precision by Design Microlab 600 diluters and dispensers achieve precise and reproducible results through positive-displacement syringe drives that are independent of fluid viscosity, vapor pressure, or temperature. This makes the instrument highly suitable for complex or sensitive fluid-handling tasks such as: Serial dilutions Dwsdpfx Aexhfztel Sjc Titrations Standard preparations Reagent distribution Sample aliquoting

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 34271, Machine available November 2026 Sold on behalf of a customer Machine incl. inter-sanding unit Working width 1350 mm Sanding belt length 1900 mm Sanding belt width 1370 mm - combined contact roller sanding head with sanding belt grit adjustment Dwedpfxez Hm Ens Al Soc - contact roller 85° Shore - gAE rubberized pressure rollers behind the sanding head - EG 3 electronically controlled segmented pressure bar, element width 30 mm - A 3 3-speed pole-changeable drive motor 7.5 / 10 / 15 Kw (inter-sanding package) (Sanding belt speed 4.5 / 9 / 18 m/s) - BV belt blowing device, workpiece-controlled (inter-sanding package) - belt feed system with control automation for belt centering - feed speed 4 / 8 m/min - RTE roller table at the infeed - RTA roller table at the outfeed - motorized adjustment to workpiece thickness with workpiece thickness preselection via keyboard - RB rotating cleaning brush on the outfeed side (inter-sanding package) - additional sanding flap with felt 36 (inter-sanding package)

Condition: used, This listing is for the Julabo FL601 Recirculating Cooler/Chiller The unit is in full working condition and is ready for immediate use The Julabo FL601 is a recirculating chiller engineered for routine cooling applications in laboratories and process environments. Designed for space-saving integration, energy efficiency, and ease of operation, the FL601 delivers precision temperature control with an extensive range of safety and connectivity features. Performance & Control Temperature Range: −20 °C to +40 °C Temperature Stability: ±0.5 °C via microprocessor PID control Cooling Capacity: Up to 600 W at +20 °C Pump Flow Rate: Up to 23 L/min at 1 bar Return Line Temp Limit: +80 °C The FL601 features reliable PID temperature control, making it suitable for continuous operation in demanding environments such as analytical instrumentation, rotary evaporators, and closed-loop process cooling. Design & Ergonomics Dsdpoxhf A Djfx Al Sewc The FL601 emphasizes ease of use and maintenance: Splash-proof keypad with large, bright LED display Accessible top-mounted filling port with lift-up cover Second hinged document tray for the user manual or install documents Removable front venting grid for quick cleaning of the condenser Front-facing drain tap for easy fluid replacement Integrated stainless steel bath tank with level indicator Compact footprint with front and rear ventilation only — no side vents — allowing side-by-side placement with other devices Smart Features & Connectivity RS232 interface for PC/lab system connectivity Potential-free alarm output (max. 30 VA) for external device integration IP21-rated housing (IEC 60529) for splash protection Optical and audible low-level alarm system for added safety Key Advantages at a Glance Feature Benefit Microprocessor PID control Stable, accurate temperature regulation Front-facing vents Space-saving design; units can be placed side-by-side Easy access filling & draining- Reduces downtime for maintenance Integrated stainless steel bath tank Corrosion-resistant and durable Audible/visual alarms Ensures safe operation and early fault detection RS232 & alarm contact Ready for system automation and remote monitoring Quiet operation (~55 dBA) Suitable for sensitive lab environments Robust construction (~48 kg) Long-lasting performance in daily use Common Applications Rotary evaporators Refractometers Spectrophotometers Distillation units Jacketed reactors Heat exchangers Laser cooling and OEM equipment support

Condition: used, This listing is for the Eppendorf Centrifuge 5420 The unit is in full working condition and is ready for immediate use The Eppendorf 5420 is a non-refrigerated microcentrifuge designed for routine molecular biology workflows—especially spin‑column-based DNA/RNA purification, gel extraction, and PCR prep. It offers outstanding performance while saving precious bench space. Key Features & Design Highlights Compact Footprint: Measures just 24 × 35 × 22 cm (W × D × H), or approximately 9.4 × 13.8 × 8.7 in., making it ideal for crowded lab benches. High-Speed Performance: Reaches up to 15,060 rpm, generating a maximum relative centrifugal force (RCF) of 21,300 × g. Large Capacity with Flexibility: Comes standard with an aerosol‑tight rotor accommodating 24 × 1.5/2.0 mL tubes. Optional adapters support 0.2, 0.4, 0.5 mL tubes, 0.6 mL BD Microtainers, as well as a rotor for 32 × 0.2 mL PCR tubes or four 8‑strip PCR sets. Dodpfx Aljxhd Hbe Sewc Ergonomic Controls: Soft‑touch lid closure—one-finger operation. Automatic lid opening at the end of runs to minimize sample warming and ease access. One‑push short‑spin key—perfect for quick spins without holding the button. Easy‑clean keypad and large, bright LCD display. Low Noise & Safety: Quiet operation at

Condition: used, This listing is for the Walker Class 11 Biological Safety Cabinet The unit is in full working condition and is ready for immediate use A Walker Biological Safety Cabinet is a type of biosafety cabinet (BSC) designed and manufactured by Walker, a company that specializes in laboratory containment equipment. These cabinets are used in laboratories to provide a controlled, contaminant-free environment for handling potentially hazardous biological materials. What Is a Biological Safety Cabinet? A Biological Safety Cabinet (BSC) is an enclosed, ventilated laboratory workspace designed to: Protect the user from exposure to biohazards, Protect the experiment or product from contamination, Prevent environmental contamination. Dsdpexhfr Eofx Al Sewc They achieve this through HEPA (High-Efficiency Particulate Air) filtration and controlled airflow systems. Walker Biological Safety Cabinet – Key Features HEPA-filtered airflow: Removes airborne particles and microorganisms. Laminar airflow: Provides a clean work area by maintaining unidirectional air movement. Front access sash: Allows operator access while maintaining airflow barrier. UV light for sterilization when not in use. Ergonomic design: For user comfort during long procedures.

Condition: excellent (used), Year of construction: 2008, input voltage: 380 V, cutting height (max.): 330 mm, cutting width (max.): 370 mm, total height: 34 mm, overall weight: 2,500 kg, cutting range round steel at 90°: 330 mm, cutting range square steel at 90°: 330 mm, saw band length: 4,430 mm, saw band width: 1 mm, For sale is a professional, fully automatic bandsaw for cutting metal, manufactured by the renowned Taiwanese brand Bigstone, model CF 325 (year of manufacture 2008). Its robust and rigid construction, combined with high performance, makes it technologically comparable to top-of-the-line models from brands such as AMADA, BOMAR, and PILOUS. Dwedpfxjxyuwns Al Ssc The machine weighs 2500 kg, which guarantees complete vibration-free operation during cutting and ensures perfect geometry and consistent results in serial production. Technical condition: The machine is 100% functional, connected in the workshop, and ready for immediate production use. The hydraulic feed system, vise clamp, and automatic cycle operate flawlessly. Technical specifications: • Maximum cutting range (square): 330 mm • Maximum cutting range (rectangle): 330 x 370 mm • Cutting blade size: 4430 x 34 x 1.1 mm (wide, stable blade) • Main motor power: 5 kW (very powerful drive) • Weight: approx. 2500 kg Equipment and logistics: • Advanced automatic control: The controller allows for full programming of the desired number of pieces to be cut. • Multiple feed function: The machine has a function that allows for up to nine (9x) repetitions of the feed stroke for a single piece. This enables fully automatic cutting of very long parts without the need to manually adjust the machine's stop! • Full automatic cycle (hydraulic material feeding, clamping, cutting, and return of the arm). • Integrated cooling system and blade cleaning brush. • LOADING INCLUDED IN THE PRICE – I have a forklift truck on-site and can ensure the safe and efficient loading of this 2.5-ton machine onto your transport. It is possible to test the saw in a full automatic cycle under power during inspection. Price: 26,000 PLN net (+23% VAT), negotiable. I will issue a VAT invoice.

Condition: used, This listing is for the Olympus CX31RBSF Microscope The unit is in full working condition and is ready for immediate use Djdpfxsxhfd Ij Al Sewc Overview The Olympus CX31RBSF is an upright, binocular compound biological microscope, part of Olympus’s CX series known for its durable, ergonomic design and high-quality optics tailored for educational and routine clinical use. Key Features & Specifications Optical System & Image Quality Utilizes the UIS 2 (Universal Infinity System) optical system, delivering bright, high-contrast images with excellent field flatness. Equipped with Planned Achromat (PLCN) objectives offering superior sharpness and clarity across the field of view. Features integrated anti-fungal treatment on optics to preserve performance in high-humidity environments. Optical Components Eyepieces: Wide‑field binocular type (Field Number = 20), with a 30° inclination and interpupillary adjustment between 48‑75 mm. Objectives (typical standard set): Plan Achromats at 4×, 10×, 40×, and optionally 100× oil immersion (in some configurations). Scribd Condenser: Built‑in Abbe condenser with NA of 1.25 (with oil immersion) and aperture iris diaphragm for precise illumination control. Illumination & Stage Comes with a built‑in Köhler illuminator using a 6 V, 30 W halogen bulb. Stage: Rackless design with a double-slide holder, complete with ergonomic tactile grips for smooth X‑Y movement; stage travel approx. 76 mm × 50 mm. Ergonomics & Build Quality Featuring a rigid Y-frame, low-positioned coaxial coarse/fine focusing knobs, and pre‑focus upper limit to prevent contact with slides. Integrated hand grips make transport within labs easy and safe. Some models in the CX31 line include tilting binocular tubes, though CX31RBSF is typically fixed Dimensions & Operating Conditions Approx. 233 mm (W) × 411 mm (H) × 367.5 mm (D), weighing around 7.7–8 kg. Designed for indoor use at altitudes up to 2000 m, ambient temperature range 5 °C to 40 °C, with humidity restrictions depending on temperature.

Condition: used, Very handy and ergonomic, easy to use stroboscope with high lighting intensity (up to approx. 50 cm distance) and low energy consumption. Design with plug-in exchangeable battery pack. High frequency stability and easy adjustment with frequency doubler and splitter. Phase shift + / - 6° for observing different positions. Sensor input for external trigger. SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFNL016 Dwedpfx Alsxzh Upo Ssc Listing name: ALLURIS SMS 400 StroboVision Stroboscope

Condition: used, This listing is for the Bioquell Microflow Advanced Bio Safety Cabinet Class 2 The unit is in full working condition and is ready for immediate use The Bioquell Microflow Advanced is a high-performance Class II Biological Safety Cabinet (BSC) engineered to provide the highest level of protection for the operator, the environment, and your sensitive samples. It is the gold standard for labs handling moderate-to-high risk biological agents. Key Features & Benefits: Dual Protection: Utilizes advanced laminar airflow and HEPA filtration to create a sterile work zone while protecting the user from hazardous aerosols. Intuitive Control System: Features a clear digital display and easy-to-use interface for monitoring airflow velocities and filter status in real-time. Ergonomic Design: The angled front sash and bright internal lighting reduce glare and physical strain during long sessions of microscopy or pipetting. Safe Change Technology: Designed for easy and safe filter replacements, minimizing downtime and maintenance risks. Versatile Lab Utility: Ideal for microbiology, cell culture, and pharmaceutical research where contamination control is non-negotiable. Dwodsyu Trnepfx Al Sjc

Condition: used, This listing is for one of 2 Sets Mettler Toledo Seven Excellence Multiparameter Meters, each with a Mettler Toledo P25 Printer These units are in full working condition and is ready for immediate use The METTLER TOLEDO SevenExcellence series includes a line of advanced benchtop meters designed for high-precision electrochemical measurements. These meters are ideal for applications in pharmaceuticals, food and beverage quality control, and environmental testing. Key Features Across the Series Measurement Capabilities: Models support pH, conductivity, resistivity, redox/ORP, TDS, salinity, ISFET, ion selective electrodes (ISE), and dissolved oxygen (DO). User Interface & Workflow Optimization: Large touchscreen display for intuitive, efficient navigation. Plain language menu structure eliminates confusion during setup. One-click operation launches one of 17 predefined or 60 customizable methods, boosting throughput. Choose from uFocus™ view, which displays only critical data, or standard view for detailed information including setup and measurements. Data Management: Export results to printers, Excel, or LIMS. Compatible with LabX software for 21 CFR Part 11 compliance and advanced data control. Time and date stamps from a radio-controlled clock ensure compliance with GLP standards. Djdpfx Aloxv Adbo Sowc Security & Compliance: User management settings and PIN protection prevent unauthorized method changes. Integrated Sensor Management (ISM®) pH electrodes are automatically recognized and retain their own calibration data—ensuring accuracy even when electrodes are swapped. Modular and Ergonomic Design: Electrode arm enables easy one-handed operation and precise vertical movement to reduce spills and save time. Modular construction allows for easy upgrades and expansion as your lab's needs change. Connectivity options include USB, Ethernet, and RS-232 ports for integration with PCs and peripheral devices.