Used Bore Measuring Micrometers for sale (11,308)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, SUPER PRICE!!! NOW ONLY 6,000 EUR!!! Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing its basic structure, except for the computer. A newer, more modern HP computer with a small form factor is included. Nlodpfx Abozcqy Ejuoh Max. diameter: 350 mm Max. test piece height: 500 mm (higher is possible, measured in two sections, up to a maximum of 1000 mm) Self-centering of the workpiece: +/- 5 mm Max. weight of the test piece: 40 kg The system has been used very little and has only had two owners. The original owner, from whom I purchased it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password). It is also on the USB stick, perhaps to be installed on another machine at your location. Accessories are included: the original Taylor Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase individually. A sample/pattern lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight forwarder. It is already securely fastened to them. The Talyrond 265 and the desk will be well-protected for transport with bubble wrap, etc., and wrapped with stretch film, and the system itself is secured with "transport safety screws." Shipping will be at the buyer's expense and will be carried out on two Euro pallets. The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site. This is now recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system can be damaged when it starts up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!!

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine / coordinate drilling machine / jig boring machine (Made in Bienne/Biel, Switzerland). Excellent condition! Machine available online for only 3 more weeks (until November 16, 2026). The offer has been updated with even more accessories! Tool package with a value of approximately 12,500 EUR. A unique opportunity for connoisseurs of these machines at a special price. Hauser coordinate drilling machines in this condition are now mostly only available from specialized dealers in Switzerland, but at considerably higher prices, up to three times my asking price. Please compare for yourself! Due to the many inquiries: please only contact us if you are a serious buyer with a genuine intention to purchase; installment payments will not be accepted! As long as the advertisement is online, the machine is still available. An inspection while the machine is powered on is expressly possible. To be sold only to appreciative owners, such as watchmakers, precision engineering workshops, or testing workshops/prototype construction facilities, not to profit-oriented dealers. The coordinate drilling machine was with its first owner for 41 years and features the rare option of a motorized table drive/rapid traverse in the X and Y axes, as well as potentiometers. The stepless feed in the X-axis also allows for light milling and surfacing operations. This eliminates the tedious manual cranking required in all other Hauser coordinate drilling machines. The machine features thermal stabilization and expansion compensation. For this purpose, 2 heaters are provided, which are switched on separately before starting work to maintain high accuracy and dimensional precision. This explains the factory-specified high positioning accuracy of 0.002 mm. It should be noted that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and surfacing in depth with Wohlhaupter, spindle tools, etc. With the options mentioned and in this first-class condition, it is very rare and highly unlikely to be available again in this form. These machines are primarily used in the watch industry, gunsmithing, precision engineering, material testing, and the optical industry, where the highest precision is required. Also ideally suited for engine construction/overhaul, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle connection MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Nlsdpfezuvwlex Abujh Distance table to spindle = 590 mm, spindle speeds stepless from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 stages from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 Volt, spindle motor 0.80 hp Dimensions machine: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm, Machine weight approx. 1500 kg. Payment for the machine will be made, as is customary for used machines, in full before loading, no partial or installment payments! I prefer the machine to be picked up by the buyer via a shipping company or in their own truck. Loading onto a truck is free for the buyer. Shipping (direct transport without transshipment) within the EU is still

Condition: ready for operation (used), Year of construction: 2004, Manufacturer: CE Johansson / Hexagon Metrology Model: Saphir 12.5-30-10 Machine Type: 9489-145 Serial Number: 8489-70305 Measuring Capacity X-axis: 1,250 mm Y-axis: 3,000 mm Z-axis: 1,000 mm Machine Dimensions Overall Width (B): 2,400 mm Internal Width (B₁): 1,450 mm Overall Length (D): 4,860 mm Overall Height (H): 3,790 mm Table Height (H₁): 700 mm Clearance Height (Hₚ): 1,150 mm Weight & Load Capacity Machine Weight: 8,200 kg Maximum Permissible Workpiece Weight: 6,000 kg Clamping Area: 1,450 × 3,400 mm Measuring Performance Resolution: 0.1 µm Accuracy (VDI/VDE 2617 Part 2.1): U₃ = 4 + 5L µm (L in meters) Speed & Acceleration Maximum CNC Speed: 500 mm/s Acceleration: 1,000 mm/s² Electrical Requirements Power Supply: 230 V ±10%, Single Phase, 50 Hz Power Consumption: 1,500 VA (10 A) Air Supply Operating Pressure: 6–10 kp/cm² (0.6–1.0 MPa) Air Consumption: 48 L/min at 5.5 kp/cm² (240 NL/min) Operating Environment Required Temperature Stability: ±1.0 °C Maximum Temperature Gradient: 0.5 °C Software PC-DMIS Version: CAD++ 2018 R2 (Release) Build: 535 (Pre-Release) Major Release Date: October 30, 2019 Nlodpfx Aozrvg Usbush

Condition: excellent (used), Year of construction: 2006, A full set of 5 Cogsdill Boring, facing, and contouring heads. Comprising - ZX300 Facing & Contouring Head Bi-directional Stub Tool Seat Pocket Tool Single Slide Tool Valve Seat Pocket Tool Extension and support bars included, with bespoke stand as shown. Nlodpfx Asz Erx Dsbueh Operations include: Boring, Facing, Contouring, Threading Taper Boring, Deep Cavity Boring Grooving. Profiling, Back-spotfacing Chamfering, Bottle Boring. Radii

Condition: excellent (used), Professional external micrometer designed for precise measurement of diameters, thicknesses, and dimensions of mechanical components. The set is equipped with interchangeable measuring tips and calibration standards, enabling operation within a wide measurement range. Technical specifications: • Manufacturer: HOLEX Nsdpfx Aoz Sm Ezjbuslh • Measurement range: 100–200 mm • Reading accuracy: 0.01 mm • Interchangeable measuring tips • Calibration standards included • Wooden carrying case Condition: Used item, in very good visual condition. Completeness as shown in the photos. The mechanism operates smoothly. Normal signs of wear and tear resulting from storage and use. The set includes: • micrometer 100–200 mm, • interchangeable measuring tips, • calibration standards, • adjustment wrench, • wooden case.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 09120035, total width: 970 mm, total length: 930 mm, total height: 1,620 mm, overall weight: 445 kg, Equipment: documentation/manual, type plate available, Dear Sir or Madam, We are selling our Tesa Micro-Hite 3D measuring machine. The measuring machine is in very good condition and has been well maintained. In addition, there are a number of accessories included. You can see these in the images below. Nodpfxezy H U Se Abuelh If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1933, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,259 mm, travel distance Z-axis: 1,500 mm, table length: 1,250 mm, table width: 1,400 mm, overall weight: 10,500 kg, x-travel 1600 mm y-travel 1259 mm z-travel 1500 mm tool adaptor SK 50 weight 10,5 t output 49 kw feed 6000 m/min control Heidenhein 151 1600 min table: 1250-1400 mm serial number 1933 weight of the machine ca. 10,5 t Nljdoz Aun Sspfx Abueh

Condition: good (used), Year of construction: 2014, Knuth Sinus 330 x 1500 Knuth Sinus 330 x 1500 lathe, manufactured in 2014, in very good original condition. The machine comes from a special production run by a renowned German machine tool company. CE compliant!! Technical data: Year of manufacture: 2014 Knuth Sinus 330 x 1500 Working area: Workpiece length: 1,500 mm Turning diameter over bed: 660 mm Turning diameter over cross slide: 440 mm Turning diameter without bridge: 900 mm Bridge length: 320 mm Bed width: 400 mm Travel distances: Travel X-axis: 368 mm Travel Z1-axis: 230 mm Swivel range of top slide: 45° Main spindle: Spindle speed: 25 rpm - 1,600 rpm Spindle bore: 105 mm Spindle mounting: D1-8 Spindle taper: ø 113 mm / 1:20 Rapid traverse: Rapid traverse X-axis: 2,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Tailstock: Tailstock spindle diameter: 90 mm Tailstock taper: 5 MK Tailstock quill stroke: 235 mm Tailstock cross slide: ± 12.5 mm Drive power: Motor power, main drive: 7.5 kW Dimensions and weights: Dimensions (L x W x H): 3.21 m x 1.23 m x 1.6 m Weight: 2,800 kg About the machine: The Sinus D is the largest series in the universal lathe segment. Conventional lathes like this are characterized by their robust design and high versatility. The design follows a classic design, but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the power transmission between motor and spindle is also achieved here via a manual lamellar clutch. With integrated functions such as the removable bed bridge, rapid traverse, and a taper turning device, this series offers optional solutions for machining long workpieces or large flanges. One-piece heavy cast bed with high stability Massive headstock with large spindle bearings Nedpfx Ajz Irwfebuolh Rapid traverse in 2 axes for fast positioning Taper turning attachment for additional applications Well-designed safety features You can find more lathes from well-known manufacturers on our website.

Condition: used, Year of construction: 1988, machine/vehicle number: 13.088.094, travel distance X-axis: 420 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 120 mm, spindle speed (max.): 9,000 rpm, controller model: HEIDENHAIN TNC 155, drilling depth: 120 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range, X-axis: 420 mm Travel range, Y-axis: 240 mm Travel range, Z-axis: 120 mm Travel range, A-axis: ± 30,000 ° Table clamping surface: 780 × 230 mm Drill head adjustment range: 450 mm Spindle speed: 50–9,000 rpm Spindle motor drive power: 3.7 kW Drilling capacity in steel: 20 mm Drilling depth: up to 120 mm Rapid traverse, X-axis: 7 m/min Nledpfoz Ilu Rsx Abujh Feed rate, X-axis: 7,000 mm/min Rapid traverse, Y-axis: 7 m/min Feed rate, Y-axis: 1–7,000 mm/min Feed rate, Z-axis: 0.02–0.30 mm/rev Rapid traverse, A-axis: 10,800 °/min Feed rate, A-axis: 1–10,800 °/min MACHINE DETAILS Control system: HEIDENHAIN TNC 155 Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,200 x 2,000 x 2,400 mm Weight: 2,000 kg EQUIPMENT Built-in workshop drawer cabinet Hand tools Milling cutters Matching tool holders Collets External Reference: C.O. - Lot 23

Condition: used, Year of construction: 2004, Mitutoyo CRYSTA-Apex C7106 – used CNC coordinate measuring machine with a gantry design, professionally inspected and fully functional. The proven C-series from Mitutoyo stands for measurement stability on a granite base – ideal for precise 3D measuring tasks in the metrology lab. Technical data: - Measuring range: 700 x 1000 x 600 mm - Control system: UC-200H - Software: MCOSMOS-1 V4 Nodpfxoz Tffns Abujlh - Probe system: Renishaw PH10M Equipment & accessories: - Renishaw PH10M rotary/tilting head - Renishaw TP200 probe system - Renishaw HCU1 hand control unit - Mitutoyo calibration certificate 08/2026 (WK-2060334-26) Included in the scope of supply: - Coordinate measuring machine CRYSTA-Apex C7106 - Renishaw PH10M rotary/tilting head - Renishaw TP200 probe system - Renishaw HCU1 hand control unit - Computer system with MCOSMOS-1 V4 - Mitutoyo calibration certificate 08/2026 Not included in the scope of supply: - Automatic probe changer / probe changing rack Condition: used, inspected – fully functional. Year of manufacture: 2004. Procedure: Inspection by appointment. Disassembly and loading will be carried out by us, transport on request. Location: Leonberg, Germany. Kneissl Messtechnik GmbH – your specialist for coordinate measuring technology with an accredited DAkkS calibration service. Installation, training, and instruction are optional.

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted Nsdpfxju N D Rqs Abuelh - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: used, This listing is for a Mitutoyo 202TP Vision Measuring System The unit is in full working condition and is ready for immediate release Njdpfsxzgtdox Abuslh The Mitutoyo 202TP Vision Measuring System is a vision measuring machine — a type of optical metrology system that uses high‑resolution imaging and software to measure the dimensions of parts without physical contact. These systems are widely used for precision inspection of components in industries like automotive, electronics, medical devices and precision engineering. Vision measuring systems eliminate many of the errors and limitations of manual microscope measurements by combining controlled lighting, high‑resolution cameras, automatic edge detection, and computer analysis to deliver accurate and repeatable measurements

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine from Zett Mess Platen and 2 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Platen dimensions: 6,000 x 3,100 mm Measuring range: X/Y/Z 6 / 3,100 / 2,500 mm Service available from the successor company, Zett Mess Includes all accessories Nlsdpfx Ao Aa Ikfebush Price: EUR 9,500.00 plus VAT, ex works

Condition: good (used), Year of construction: 2024, Theodolite DT-405, Video Measurement System VM-18, Angle Measurement Unit, Camera System used, from business liquidation Original purchase: 2024 Information and data according to the manufacturer: with active target panel Range up to 130m Video display of H and V angles versatile applications lockable H and V axes carrying handle collimating telescope zoom camera LED target panel motorized focusing unit Note: Operation only possible via monitor MF-03 Charging cable for Geo-222X target panels available Operating manual Transport case without carrying strap without adjustment tool without rain cover We recommend an inspection Information without guarantee Information, details, and technical data from the manufacturer To avoid any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are Monday to Friday from 8:30 a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and desired after prior appointment. Subject to prior sale, changes, errors and misprints. Nljdj Ab R Upspfx Abush

Condition: used, Steinheil KONTUR 408-2/D optoelectronic contour and wave measurement system High-precision optoelectronic contour and wave measurement system, Steinheil KONTUR 408-2/D, with high-quality Jenoptik optics. Nljdpfx Aozz Hwvsbuoh The system is used for non-contact, high-precision, and fast measurement of rotationally symmetrical components (e.g., shafts, camshafts, turned parts). The device scans the measurement object non-contact using the shadow image principle. Rotational measurements are recorded with up to 1440 measurement points on the circumference per measuring point. The evaluation and quality control are performed directly via an integrated SPC software (Statistical Process Control) on a Windows NT-based system, with clear tolerance bars and diagrams. The system is housed in a closed aluminum profile housing with a transparent protective structure and is secured by professional safety light curtains. System Overview: Operating principle: It scans workpieces non-contact using the shadow image principle. Main application: Fast and precise measurement of complete workpiece contours and shafts in industrial environments. The measuring unit (KONTUR 408): - Vertical measuring system with integrated IR LED lighting and sensor technology - Measuring range: diameter from 4 to 85 mm, workpiece lengths up to 400 mm - Drive & scales: Brushless servo motors and high-precision Heidenhain scales - The device is housed in a stable aluminum profile frame with transparent protective walls and Sick safety light curtains. The control & IT infrastructure: - A robust 19-inch control cabinet (Rittal) houses a separate PC workstation that controls the evaluation and visualization (historically designed for Windows NT). - Various conventional interfaces on the rear (including RJ-45 network, serial COM ports, parallel LPT2 printer port, AUI interfaces, and BNC coaxial connections). Technical data: Manufacturer: Steinheil Model: KONTUR 408 Measuring range diameter: 4 mm to 85 mm Measuring range length: up to 400 mm Resolution diameter: < 0.5 µm Resolution length: 0.5 µm Resolution rotation: 0.018° Measuring accuracy (at 20°C): Diameter: ± 2 µm, Length: ± [5 + L [mm] / 100] µm Scanning rate: 2000 per second / 5000 per mm Measuring times: 10 to 50 seconds (depending on the number of test features) Measuring systems / scales: High-quality Heidenhain scales (length & rotation) Drive system: Brushless DC servo motors (controlled via Elmo NBA 10/200RH amplifiers) Process computer: VME bus computer in the Rittal cabinet Evaluation/Visualization: PC workstation (designed for Windows NT) Lighting: IR LED system (lifetime approx. 50,000 hours) Protection class: IP 54 Operating temperature: +10 °C to +45 °C Dimensions (W x H x D): approx. 590 x 900 x 380 mm Weight: approx. 100 kg (plus peripherals / cabinet) Installation position: Tabletop device / tabletop system "Everything from one source: We would be happy to offer you a suitable bank financing for your project." Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Micrometer screws, micrometer screws, tooth width measurement, plate measuring surfaces -Measuring range: 25-200 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -large measuring surfaces Nodpfx Asb A Sx Uobuslh -Measuring force: Ratchet -Including case -Adjustable dimensions -Hand protection -Key Other sizes also available -Weight: 5 kg

Condition: used, Year of construction: 1995, TOS W100A horizontal table boring machine Nledez Sff Hepfx Abuoh X spindle is worn Digital read out is partially functional lot of tools included Table Dimensions 1200 x 1200 mm X-Axis Travel (Longitudinal) 1250 mm Y-Axis Travel (Vertical) 1120 mm Z-Axis Travel (Cross) 1600 mm W-Axis (Spindle) 900 mm Spindle Motor 11mkW Spindle Speed 7-1120rpm Spindle Taper ISO 50 Spindle Diamete 100 mm Facing Chuck 600 mm Floor Space 6020 x 3500 x 3000 mm Machine Weight 14.000 kg Price ex VAT Delivery ex works, as is

Condition: good (used), Year of construction: 2020, machine/vehicle number: 233949-1, Offer 26377 Measuring and control table made of natural hard stone with cabinet base Technical data: - Measuring and control table according to DIN 876 / 00 - Length approx. 1200 mm - Width approx. 800 mm - Plate thickness approx. 160 mm - Table height, adjustable, with cabinet base approx. 910 mm - Cabinet base with 1 door + 4 drawers Nedpfx Aj Ad Hh Dsbuslh - Drawer width 550 mm - Weight approx. 500 kg

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine, Zett Mess Plates and 4 measuring beams, manufactured in 1990 Nljde Aa Ii Uepfx Abueh Electronics and measuring system newly installed in 2020 Plate dimensions: 12,000 x 3,100 mm Measuring range X/Y/Z: 12,000 / 3,100 / 2,500 mm Service from the successor company, Zett Mess, is available All accessories included Price: EUR 23,000.00 plus VAT, ex works

Condition: used, Year of construction: 1994, functionality: fully functional, overall weight: 27,000 kg, spindle diameter 125 mm x-travel 2000 mm y-travel 1600 mm Nlodeztfwxjpfx Abuoh Control Siemens 840 C z-travel 1400 mm 600 mm ja total power requirement 40 kW weight of the machine ca. 27 t

Condition: used, Carl Zeiss Jena ULM 01-600C Universal Length Measuring Machine Manufacturer: Carl Zeiss Jena Model: ULM 01-600C Serial No.: 7104 Digital Readout: AE101 Nedpfxj Ady Iko Abujlh Description Carl Zeiss Jena ULM 01-600C universal length measuring machine with AE101 digital readout and a comprehensive set of original accessories. The machine comes from a former metrology environment and includes multiple fixtures, measuring attachments, tables, centers, and original storage boxes as shown in the photographs. The machine has been stored for a number of years and has not been tested recently. It is therefore offered in its current condition. Included Carl Zeiss Jena ULM 01-600C measuring machine AE101 electronic display unit Original measuring fixtures and accessories Various probes, supports, tables, and mounting equipment Original wooden storage cases Everything shown in the photos Stored unused for several years Not recently tested Sold as-is Calibration status unknown

Condition: good (used), Year of construction: 1979, functionality: fully functional, We are offering this used Schneider SL 1 long-hole drilling machine, model SL 1 7429, manufactured in 1979, for sale. Manufacturer: Schneider Nlodpfxjz Afd Ds Abuoh Model: SL 1 Machine No.: 7429 Year of Manufacture: 11/79 The advertised price is €1,400 net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Purchase your coordinate measuring machine from the specialist in coordinate measuring technology with 30 years of experience – Kneissl-Messtechnik. General machine data: Machine type: Crysta-Apex C 7106 Manufacturer: Mitutoyo Measuring range: 700 x 1000 x 600 mm Probing system: Renishaw PH10MQ (rotary/swivel head) Probe head: Renishaw TP200 Software: MCOSMOS-1 V4 Included in delivery: - Coordinate measuring machine Mitutoyo CRYSTA-Apex C7106 - Renishaw PH10MQ rotary/swivel head - Renishaw TP200 probing system Not included in delivery: - Automatic probe changer / probe changing rack Condition: Used machine. Further technical details (year of manufacture, control system) available upon request. Processing: Inspection possible by arrangement. Dismantling and loading carried out by us, transport upon request. Kneissl Messtechnik GmbH – Your specialist in coordinate measuring technology with an accredited DAkkS calibration service. Installation, instruction, and training available as options. Nlsdo Aa Nc Nspfx Abujh We offer worldwide delivery on request!

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 16201201, drilling depth: 70 mm, type of input current: three-phase, compressed air connection: 8 bar, input voltage: 400 V, workpiece height (max.): 65 mm, number of spindles: 21, operating pressure: 8 bar, input frequency: 50 Hz, workpiece length (max.): 850 mm, workpiece width (max.): 3,000 mm, For sale is a used Felder FD 921 dowel drilling machine from 2015. This machine is ideally suited for precise dowel joints and series hole drilling in the furniture, interior design, and carpentry sectors. Thanks to its robust design and proven Felder quality, it is ideal for professional use. Further technical data: Drilling unit with 21 spindles Motor power: 1.5 kW Rated current: 3.8 A Working pressure: 6 - 8 bar Multi-spindle dowel drilling machine for efficient series and dowel drilling Precise workpiece stops and easy operation Number of drilling heads: 21 (11 right-rotating, 10 left-rotating) Nsdpfjz Rvd Nex Abujlh Axial distance between the drilling heads: 32 mm Max. workpiece size: 850x3000 mm The machine is in used, fully functional condition and shows the usual signs of wear of a workshop machine. It is ideally suited for carpentry shops, joineries, and professional furniture and interior design. Inspection and test run possible by appointment.

Condition: used, Year of construction: 2006, Measuring range: 500x400x400 mm, max. workpiece weight: 180 kg, with measuring probe, manufacturer: RENISHAW, type: MH20I, various ruby replacement measuring probes in a case, and evaluation hardware. Nljdoz Nht Hspfx Abueh