Used Brinkmann Fh 45-54-05 for sale (17,025)

Condition: ready for operation (used), Bosch SPM 25 spindle module, serial number: 305445. This spindle module has been completely overhauled by the manufacturer, is used, shows normal signs of wear, and is 100% functional. Scope of delivery as shown in the photos. Gkjdoi D Uf Tjpfx Aqija

Condition: ready for operation (used), Rexroth HCS01.1E-W0005-A-03-B-ET-EC-PB-S4-NN-FW IndraDrive Cs MNR: R911344555 SN: 7260405435793, used, normal signs of use, 100% functional, scope of delivery as per photos Gkedpferyiqfsx Aqioa

Condition: ready for operation (used), Siemens 1FT5046-0AC01-1 - Z AC-VSA motor SN:EC310204543005 with EBD 0.2B 24V - 13W holding brake and 1FU1030 5.5mV/min tacho - Z = G45 (holding brake built-in), used, in good condition, 100% operational, delivery as per photos. Gksdpfx Ajy R Itysqiea

Condition: new, Siemens 1FK7043-4CK71-1UA0-Z synchronous motor SN: YFK4645054002003 - Z = N05: alternative shaft geometry (short shaft - 14mm diameter) X05: paint in RAL 5015 (sky blue), unused in opened original packaging, 100% functional, scope of delivery as per photos Gjdpfx Aqsu Ayipeijka

Condition: ready for operation (used), Siemens 6SN1145-1BB00-0EA1 E/R module SN: ST-TO2010545, professionally fully refurbished and tested with 3-month warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Gjdex Dxlqepfx Aqijka

Condition: ready for operation (used), Brinkmann 6UMFR1AA-D05113 frequency inverter SN:902800OEC0000H ,used, normal traces of use, 100% functional, scope of delivery according to photos Gjdspnplxepfx Aqioka

Condition: ready for operation (used), Fanuc A20B-1001-0160/05A Board SN:P67P01454, used, minor signs of wear, 100% functional, scope of delivery as per photos. Gjdox Erinjpfx Aqieka

Condition: ready for operation (used), Siemens connector for 1FK7043 synchronous motor SN: YFK4645054002004 - Z = X05: painted in RAL 5015 (sky blue), used, in good condition, 100% functional, scope of delivery as shown in photos. Gkjdpfex Dv Ngex Aqiea

Condition: ready for operation (used), Brinkmann 6UMFR1AA-D05111 frequency inverter, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Godpfxei D Ukxo Aqijka

Condition: new, Siemens 1HU3054-0AC01-Z permanent magnet motor, Z = see nameplate, SN:8M65214504002, unused, 100% operational, delivery as per photo Gkedpfx Ajx Dvfnsqiea

Condition: ready for operation (used), Siemens rotor for 1FK7043-4CK71 synchronous motor SN: YFK4645054002004 - Z = N05: short shaft + X05: painted in RAL 5015 (sky blue), Z as per nameplate, used, in good condition, 100% functional, scope of delivery as shown in photos. Gkjdpfex Dv Rqox Aqiea

Condition: ready for operation (used), Indramat RAC 2.2-250-380-A00-W1 main spindle drive SN:232713-05451, used, normal signs of wear, 100% functional, delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Gkedex Dw H Hopfx Aqiea

Condition: ready for operation (used), Rexroth HCS01.1E-W0005-A-03-B-ET-EC-PB-S4-NN-FW IndraDrive Cs MNR: R911344555 SN: 7260405435789, used, normal signs of use, 100% functional, scope of delivery as per photos Gkjdoryiqbopfx Aqija

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of input current: AC, input voltage: 230 V, We are offering this very well-maintained TBS PACK TAS-0545-AH sealing machine, manufactured in 2019. Manufacturer: tbs-pack GmbH Model number: TAS-0545-AH Serial number: 10004964 Voltage: 230 V Frequency: 50 Hz Power: 550 W Gkjdpezg Iuyefx Aqioa Year of manufacture: 2019 This is a semi-automatic horizontal flow-wrapping machine with a conveyor belt and the following additional specifications: - Height-adjustable conveyor belt - Seam width: 10 mm - Speed: Variable, adjustable up to 10 meters/minute - Power consumption: 550 W / 230 V - Film material/thickness: PE/PP/Cellophane/PVC paper laminates, aluminum laminates, and other laminates up to 200µ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Keba analog module AM 450/A Kemro K2-400 – suitable for Engel CC200 control - removed from an operational machine - fully functional Manufacturer: Keba Type: AM 450/A Kemro K2-400 Manufacturer No.: 054202 Gkjdpfow Ah N Ssx Aqioa

Condition: used, Keba temperature card TM 450/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine Gsdpsw Ah Nfjfx Aqiska - fully functionalmanufacturer: Keba type: TM 450/A Kemro K2-400 manufacturer no.: 054492

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel coupling with sliding mechanism and self-lubricating (Type Jost JSK), mounted on the subframe. ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet). Superstructure: Crane Interchange System: The superstructure, including the crane, can be removed, and a fifth wheel coupling is mounted on the chassis in its place. The function of crane and superstructure, including the fifth wheel coupling, is also possible. The vehicle has a total of two fifth wheel couplings, each of which can be moved longitudinally. A crawler unit would also be available; the net price is €149,900. ? Assembly/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front. ? Platform body as a steel/welded construction, removable. ? Length approx. 380 cm, width approx. 248 cm. ? Platform body painted. Color: RAL (chassis color). ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized finish with steps, removable lashing bars. ? Standard platform floor with welded 4 mm steel diamond plate, painted in RAL (chassis color). ? 6 recessed lashing points, 2500 daN each, per side, in a slot profile with flexible arrangement. ? 4 x lashing points for chains, 6500 daN (2 at the front and 2 at the rear of the superstructure). ? Sturdy end wall consisting of a welded frame, welded 4 mm steel sheet, and 5 accessory hooks. End wall height approx. 1300 mm, steel construction, painted, with 2 folding eyelets for lashing straps, welded on. ? Cladding panels, fenders made of aluminum diamond plate (sandblasted, powder-coated and painted). ? Multifix lashing bar pockets, 2 rows, with a distance of approx. 80 cm from the front and rear. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers, and also at the rear for trailers. ? New crane, type FASSI F545 RA 2.27, endlessly rotating, completely assembled, installed, and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydr. extensions. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 Gsdpfoy E A Sajx Aqioka ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out according to the technical specifications and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating instructions, maintenance manual, and crane test book. Lighting: ? 2 x LED AS integrated into the end wall ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED lights under the superstructure at the rear, on the left and right, arrangement to be agreed. ? 4 x LED AS, 2x on the left and 2x on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED strip lights, 1 on each support leg. Further information is available upon request.

Condition: used, Lippert belt conveyor GF 11540-570-450 RA2509 Technical data: Conveyor length (NL): 11540 mm Frame width (NB): approx. 570 mm Belt width (GuB): 450 mm Overall height (BH): 130 mm Support feet optionally available Conveyor speed (v m/s): please contact us Gksdey R Hcaspfx Aqiea Drive: SEW geared motor, R37 DRE80M4/TH/Z Electrical data: 50Hz V380-500, kW 0.75 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2022, Knapp roller conveyor 540-510-450 RA2384 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 540 mm Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Gkjdpfxsv Ntdve Aqija For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2017, Mecalux roller conveyorRoller conveyor 1950-540-450 RA1927 Make: Mecalux Roller width (RB): 450 mm, Steel rolls Nominal/outer width (NB): 540 mm Gjdpfsv Utyhex Aqijka length: 1950 mm Rolls diameter: 50 mm Roller distance 75 mm Overall height frame: 130 mm 2x ITOH-Deki 16936/010 24V Roller drive Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/s Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Gedsxk T Igepfx Aqiska

Condition: not inspected (used), functionality: unexamined, From stock clearance: Festo DNC-50-545 PPV-A Gkodpoq Htd Ujfx Aqisa with signs of wear due to storage untested 11 pcs. available

Condition: reconditioned (used), Mechanically overhauled machine with new LTG-StoreControl L control system 2 identical machines available Gksdpfx Aqjn D A N Hoiea External dimensions: Height 5,450 mm Width 3,380 mm Depth 2,920 mm 60 beams with a payload of 210 kg each with clear usable dimensions: W = 3,050 mm D = 813 mm H from 45 to 750 mm Total machine load capacity up to 2 x 33,650 kg Start of the service opening 900 mm above the top floor, then 800 mm high Color: GRAY/BLUE, beams sendzimier-galvanized, surfaces cleaned, signs of wear possible Performance values: Vertical drive 1 x 4 kW / 400 volts Horizontal drive 1 x 0.75 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0119800302-18001/001, volume flow: 4.8 m³/h, power: 1.9 kW (2.58 HP), type of cooling: water, rotational speed (max.): 2,910 rpm, protection type (IP code): IP55, delivery head: 7,600 mm, For sale is a high-pressure pump that supplied coolant to a CNC lathe. It matches the chip conveyor visible in the other listing. Has functioned reliably up to now. For questions or price offers, simply get in touch. Gjdpfex Rzbqex Aqieka

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00493, load capacity: 45 kg, arm reach: 2,050 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB 4600-45/2.05 manufactured in 2013.08. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: 4600-45/2.05 Model Number: IRB Year of Manufacture Robot: 2013.08 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2050 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Gsdpfx Aqozuabuoijka Installation Type: Floor, Upside-down Mount Weight (kg): 425   Controller: IRC5 Year of Manufacture Cabinet: 2013.08 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15