Used Bulmak C 400 Ts for sale (66,585)

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control Ppodpfx Aeyuuzdjprot • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: excellent (used), Here we offer you a temperature test chamber. Water-cooled Technical specifications: Temperature operating range Temperature range in °C: -70 / +180°C Temperature change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions (approx.): Height 750 mm, Width 650 mm, Depth 720 mm External dimensions (approx.): Height 1800 mm, Width 850 mm, Depth 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Nominal power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg Type: TS-70/350 Important safety information for buyers: The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) Ppjdpfx Apsyguprerot (Specifications subject to change and error!) Further questions can be answered by phone.

Year of construction: 2000, condition: good (used), Brand: SICA Type of machine: Planetary saw Model: TRC/S/SY/U 63-400 Pjdoxu I Szspfx Apropt Year of manufacture: 2000

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, total height: 1,040 mm, total width: 560 mm, total length: 960 mm, overall weight: 130 kg, warranty duration: 6 months, type of cooling: water, Equipment: documentation/manual, The equipment has been checked by an authorized service center and is ready for operation. USED ONLY 178H We provide a 6-month warranty. EWM TITAN XQ 400 puls C W EX WIFI R1 5m is a top-class German MIG/MAG semi-automatic welding machine, designed for professional and industrial use. It stands out with its high performance, advanced synergic programs, and innovative AC/DC pulse mode, which ensures excellent welding results on steel, stainless steel, aluminium, and non-ferrous metals. The integrated WiFi interface allows convenient remote operation, software updates, and seamless integration into a smart production environment. Model: TITAN XQ 400 puls C W EX WIFI R1 (with 5 m cable) Welding current range: 20 – 400 A Duty cycle (40 °C): 400 A (eta) 100 % Power supply: 3~ 400 V, 50/60 Hz Cooling system: water-cooled (W version) Processes: MIG/MAG, pulse, double pulse, forceArc, rootArc, AC Arc Wire diameters: Steel: 0.8 – 1.6 mm Aluminium: 1.0 – 1.6 mm Efficiency: >90 % Dimensions (L×W×H): approx. 960 × 560 × 1040 mm Weight: approx. 130 kg German quality and reliability. AC/DC pulse – ideal for welding aluminium and alloys. Synergic programs – fast and precise parameter selection. WiFi interface – remote control, updates, and network integration. High efficiency (>90 %) – reduced energy consumption. Mobile trolley – easy transport within the workshop. Compatible with robotic systems via additional interfaces. Ppsdpfsxdni Sox Aprst Automotive industry Stainless steel and aluminium structures Shipbuilding Serial and robotic production Industrial constructions and metal fabrication

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: Podpfx Asxr A R Tjprept For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: used, Year of construction: 2000, Manufacturer: Atoma Model: 823-C-400 Year: 2000   Number of weighing channels: 3 Maximum weight: 400 g Margin of error (e): 0.5 g   Podpfx Apsx Rz Hgsrjpt Feeding by hopper and vibrating lane. Conveyor belt Product stop by cell  

Condition: excellent (used), Year of construction: 2011, operating hours: 55,806 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 4,850 kg, For sale is an Arburg injection moulding machine, model 470 C 1500-400. The offer includes Arburg handling, type Multi Select Axis X/Y/Z 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2011 Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours: 55,806 h (pump) Injection unit: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Dimensions: approx. 4,700 x 1,700 x 2,000 mm Weight: 4,850 kg Transport and loading can be organized Europe-wide upon request (at extra cost). Ppedpfx Aow E Itispret All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: ready for operation (used), Indramat MAC 071B-0-TS-2-C/095-A-1/S001 permanent magnet three-phase servo motor, serial no. acc. to photo, used, strong traces of use, 100% functional, scope of supply acc. to photos Ppjdpfxji D Ihfj Apret

Condition: ready for operation (used), Indramat MAC071B-0-TS-4-C/095-A-1/WI522LV Permanent Magnet Motor , serial no. according to photo , hole spacing of mounting holes: 92 x 92 mm, Ø drive shaft: 19 mm ,used, normal signs of wear, 100% functional, scope of delivery according to photos Podpfxji D Ik Tj Apropt

Condition: ready for operation (used), WEG W22 motor with Karl Klein DNG 6-25/TS-300°C fan SN: 1612-302113, used, in good condition, fully functional, scope of delivery as per photos. Ppedpfx Aex Dwinoprst

Year of construction: 2017, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Podpfx Apsiiyr Sorjpt Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit

Condition: as good as new (ex-display), Year of construction: 2017, Transnorm conveyor belt GF 2100-400-300 RA2405 Technical data: Make: Transnorm Model: TS 6565 motor-driven belt diverter D=65mm Conveyor length (NL): 2100 mm Frame width (NB): 400 mm, 600 mm with motor Belt width (GuB): 300 mm Pedpfx Apswhd H Rorspt Overall height (BH): 200 mm Support feet: optionally available Conveyor speed (v m/s): 2.0 Drive: Nord Electrical data: 50Hz V380-500, kW 1.1 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1995, Transnorm Belt conveyor 3200-500-400 RA2335 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1995 Condition: good (used) Motor: fully functional conveyor length (FL): 3200 mm nominal / external width (NB): 500 mm belt width (GB): 400 mm overall height (BH): 65 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 0.175 m/s, Drive: head drive Ppedpfxjvizuce Aprjt Delivery: without supports (if needed please ask) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 36070 € 688.94 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 M 12 50-2.240 1/min 80 0.015 - 0.6 mm/U Ppjdpfxsxzuu Ae Aprjt 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Psdpfx Aswhvrrjprspt Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Condition: good (used), functionality: fully functional, Wolfking C 400 - UNI Industrial Meat Grinder Manufacturer: Wolfking Model: C 400 - UNI Machine Number: 61672 Year of manufacture: 2001 Power: 91 kW Power supply: 3 × 400 V, 50 Hz Rated current: 180 A Maximum current: 200 A Protection class: IP 65 Loading capacity: 125 kg The Wolfking C 400 industrial meat grinder is a high-performance machine designed for processing large quantities of meat in production environments. This machine stands out for its exceptionally robust construction, powerful 91 kW drive, and high resistance to demanding working conditions due to its IP65 protection rating. The C 400 model allows for fast and efficient processing of fresh, chilled, or slightly frozen meat. Stable operating parameters and a large loading chamber (125 kg) make this unit ideal for medium and large processing plants. Pjdpex E Dvmofx Aprjpt A strong drive system combined with a V/D Starter ensures reliable start-up and continuous operation under heavy loads, contributing to high reliability and long machine lifespan.

Condition: excellent (used), Year of construction: 2006, Arburg 320 C 400-170 Injection Moulding Machine Year of manufacture: 2006 Clamping force: 40 t Screw diameter: 30 mm Psdpfx Asxwu R Nsprjpt Distance between tie bars: 320 × 320 mm Maximum injection volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle contact force: 40.6 kN Heating power: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2,400 kg

Condition: good (used), Year of construction: 2000, Arburg 270 C 400-100 (2000) Clamping force: 40 t Pjdsxqfi Ajpfx Aprspt Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Drive : hydraulic Working hours : 138000 h

Condition: used, Manufacturer: Multivac Type: Vacuum machine Model: C 400 Chamber depth: 470 mm Chamber height: 170 mm or 250 mm Sealbar configurations: front 650 mm + right 450 mm left 520 mm + right 520 mm left 520 mm + right 520 mm + front 520 mm front 700 mm Voltage: 3 x 400 V 50 Hz Incorporated vacuum pump: 100 or 140 m3/h Pedpfx Aet Up Rrspropt Main material: Stainlees Steel Machine weight: 250 kg

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Planer machine with two cutters, lower and upper. Pjdpfjufr H Asx Aprspt

Condition: excellent (used), Year of construction: 2005, For sale: a functioning and very well-maintained dual-fuel burner (oil/gas) of the Weishaupt RGL50 brand – 5400 kW, including gas valve. Year of manufacture: 2005. Ppsdpfx Apszabnnerjt RGL50 Output: 600 - 5400 kW 95 - 453 kg/h Design: ZM Year of manufacture: 2005

Condition: excellent (used), mileage: 505,296 km, power: 250 kW (339.91 HP), first registration: 06/2003, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 7,100 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 2003, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank Psdjy U Hrvspfx Aprept - Airbag - Armrest - Day Cabin - Disc brakes - Front suspension: Leaf - Hydraulics - Open roof - PTO - Radio - Rear suspension: Air = Remarks = Superstructure Tank capacity: 14000 liters = More information = Tyre profile: 50% Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: used, Year of construction: 2010, machine/vehicle number: 16171170, Empty weight: 5.129 kg Lifting capacity: 400 kg Ppsdswby Dljpfx Aprot Working height: 1.730 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 3.18x1.6x3.14 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2007, machine/vehicle number: 10171-169, Empty weight: 4.670 kg Lifting capacity: 400 kg Working height: 1.730 cm Front tyres / undercarriage remaining: 60 Podpfxeya T Efe Aprjpt Rear tyres remaining : 60 Tyre brand: - Transport dimensions (LxWxH): 3x1.22x3.14 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2013, machine/vehicle number: 161712206, Empty weight: 5.129 kg Lifting capacity: 400 kg Working height: 1.730 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Solideal Transport dimensions (LxWxH): 3.18x1.6x3.14 Please contact PFEIFER GROUP for more information Pjdpfx Apoxwi Ddorjpt