5
- curved controlled machine
- max. bar diameter: 36 mm
- spindle speed max.: 4750 1/min
- 6 stations turret
- stroke of the turret slide: 80 mm
- fast reverse way: 36 mm
- circuit time: 0,5 s
- coolant device
- 2 double vertical supports
- 2 horizontal supports
accessory:
barfeeder IEMCA TS 560/32 P
multisurface storage
dimensions LxWxH:
- machine 1500 x 700 x 1600 mm
- barfeeder 5100 x 750 x 1300 mm
weight: 2.800 kg
Bsd3cmnrxa
7
number of spindles 6
spindle passage 32 mm
turning length 152 mm
Speed 200-2800 U/min.
turning diameter 32 mm
Ogcdcc8w7
feed Werkstoff: 254 mm
Accessories:
multi edge turning, univ. thread cutting attachment,
Strehleinrichtung, chip conveyor, 1 set collets, set of change wheels
9
spindle passage 65 mm
turning length 360 mm
bore depth mm
Hmpc78j
Control C200T
turning diameter 175 mm
transmission ratio 2
chuck diameter 200 mm
power capacity 6,3 kW
chip conveyor
tool taper VDI 40
bar loader
live tooling
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
5
In good technical condition.
Length: 3000 mm.
Hpo8hi2
4
capacity:
diameter D: 6-120 mm
Rod length 1600 mm
Loading system inclined plane
Bkarkgytra
Depth of the bar magazine 1000 mm
Load front/rear
application:
Longitudinal or transverse displacement 600 mm
charging time: 8-12 sec
charging time for short bars: 4-7 sec
Equipment:
Interface for OKUMA LT Series
Documentation
6
Bar feeder
brand: IEMCA
type: PRA40/42/F
Nxx8fnd
new in: 1999
(was connected on SCHÜTTE SF 32)
4
- curved controlled machine
- max. bar diameter: 36 mm
- spindle speed max.: 4750 1/min
- 6 stations turret
- stroke of the turret slide: 80 mm
- fast reverse way: 36 mm
- circuit time: 0,5 s
- coolant device
- 2 double vertical supports
- 2 horizontal supports
accessory:
barfeeder IEMCA BOSS 542/32
dimensions LxWxH:
- machine 1500 x 700 x 1600 mm
- barfeeder 3900 x 700 x 1200 mm
Bsckkbtgeb
weight: 2.000 kg
7
number of spindles 8
spindle passage 20 mm
turning length 80-100 mm
control PNC-Deco Fanuc
Ulwj8yhx
turning speeds 5000 U/min
Sub-spindle 20 mm
load magazine IEMCA PRA 52/33P
Number of working hours h
total power requirement 15 kW
weight of the machine ca. 8 t
equipped with:
- 23 axes, 8 spindle
- Chip shut
Switch-on Hours: 57133 h
(with coolant device AE1058 Knoll Chip Conveyor)
Serial-No: 1638
with complete documentation
tool tapers
spindle passage 34 mm
turning length . mm
bore depth . mm
Control Index
type S 3
live tooling
bar loader Sameca
Bkoc2px0lx
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
2
Escomatic D6R Coil Fed Automatic with coil feeder and straightener
S/n D6-1-674
Max dia : 6,5 (1/4’) [mm]
Max feed length:
- ratio 1-3 (with counter collet or revolver head) : 31 [mm]
Bqeqyv82eq
- ratio 1-1 (with counter collet or revolver head) : 62 [mm]
- ratio 1-1 and 2 feeds (with counter collet only) : 124 [mm]
- variable production rates : 0.8 – 50 pieces per minute
- rotation speed : 700, 1400 and 2800 [rpm]
- floor space : 900 x 3 400 [mm]
- weight : 980 [kg].
15
Manufacturer: Index
Model: ABC
Year of construction: 2011
Control System: Index C200-4D
Spindle bores [mm]: 60
Spindle:
Technology: Motorspindle
Speed: 6.000 rpm
Power: 13 kW
Okn9d
Torque: 64 Nm
Barcapacity: 60 mm
C-Axis: 0,00014°
Toolcarrier I (X/Z):
Technology: Turret with 8 Stations
Taper: VDI 25
Tooldrive: 6.000 rpm, 3,3 kW, 7,5 Nm
Synchronspindle: 4.500 rpm, 4,2 kW, 10 Nm, Clamping-ø 42 mm
Movement X/Z-Axis: 90/280 mm
Rapid travers X/Z-Axis: 27/36 m/min
Toolcarrier II (X/Z):
Technology: ...
2
Available bar feeder Traub for 3 meters long bars.
Bsclrmomyf
2
Swiss type automatic sliding head lathe.
Etcqpf7
7
number of spindles 8
spindle passage 20 mm
turning length 80-100 mm
control PNC-Deco Fanuc
turning speeds 5000 U/min
Sub-spindle 20 mm
load magazine IEMCA PRA 52/33P
Number of working hours h
Bl0izvyxye
total power requirement 15 kW
weight of the machine ca. 8 t
equipped with:
- 23 axes, 8 spindle
- Chip shut
Switch-on Hours: 57133 h
(with coolant device AE1058 Knoll Chip Conveyor)
Serial-No: 1638
with complete documentation
tool tapers
spindle passage 60 mm
cross-slide 4
Stxjx0
turret head 6 Pos.
thread cutting attachment
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
4
In good technical condition.
Year of production 1997
Length 2000 mm
Fgv0zyjbm
Type Spacesaver 2000
15
Manufacturer: Index
Model: ABC
Year of construction: 2012
Control System: Index C200-4D
Spindle bores [mm]: 60
Spindle:
Technology: Motorspindle
Speed: 6.000 rpm
Power: 13 kW
Torque: 64 Nm
Barcapacity: 60 mm
Boxe97vzbf
C-Axis: 0,00014°
Toolcarrier I (X/Z):
Technology: Turret with 8 Stations
Taper: VDI 25
Tooldrive: 6.000 rpm, 3,3 kW, 7,5 Nm
Synchronspindle: 4.500 rpm, 4,2 kW, 10 Nm, Clamping-ø 42 mm
Movement X/Z-Axis: 90/280 mm
Rapid travers X/Z-Axis: 27/36 m/min
Toolcarrier II (X/Z):
Techno...
6
max. bar diameter - round 26 mm
max. bar dia. - hexagonal 22 mm
max.turning length 70 mm
spindle speed range 500 - 4750 U/min
spindle drive 2,2 KW
machine weight 840 to.
machine dimensions 1,3 x 1,0 x 1,6 m
Star turret
Carriages S1, S2, S3, S4
sorting device with collecting tray
Frequency controlled feed drive
Frequencycontrolled main drive
Long-turning attachment VST
Barloader
2017 fully rebuilt and modernised. New CE!
2hspql3
Turret Automatics with Rotary-Transfer Unit, Overall base dimensions 1700x1120x1700 mm, Weight: 1800 kg, Nominal power: 4 KW,
Br3f7ui2fc
Maximum bar diameter: 16 mm, Min-Max distance between revolver and Spindle head: 48,5-113,5 mm,Revolver slides adjustment: 15mm, Revolver Slides Max Travel: 50mm, Travel of cross-slides: 32mm (4x withoun and 3x wth indexing plate), Driven by 4 KW Pole-changing Flanche Motor,Max. Ground Dimensions 1700x1120 mm, Hight: 1700 mm, Weight: 1800 KG, With all Documenta...
3
Bar feeder
brand: TRAUB
Bhq9efeu
type: STAMAG DN26
new in: 1990
connected on TRAUB TNS26 DY
spindle passage 60 mm
cross-slide 4
turret head 6 Pos.
thread cutting attachment
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Eaq7jn
5
INDEX - GU800 - 1994- system: SIEMENS 810d - max turning length: 820 mm - turning diameter: 540 mm - hydraulic chuck: 250 mm - ATC: 16
Sujbz8
4
Control type Tsugami-Mori MSC501
Equipment Chip conveyor
N. of axis 8
N. of spindle 2
MAIN-SPINDLE -
Max bar diameter Ø 20 mm
Max. machining lenght 170 mm
Spindle speed 8.000 rpm
Spindle power 5,5 Kw
C axis indexing precision 0.001°
COUNTER-SPINDLE -
Max. bar diameter Ø 20 mm
Spindle speed 6.000 rpm
Dtugsnvb0
Spindle power 2,2 Kw
C axis indexing precision 1°
Bar loader Iemca Boss 332E
Dimensions 1.800 x 1.270 x 1.800 mm
Weight 2.200 Kg
7
Bar feeder, see photo for parameters
Visgugat
Turret Automatics with Rotary-Transfer Unit, Overall base dimensions 1700x1120x1700 mm, Weight: 1800 kg, Nominal power: 4 KW,
Ek9kabi3w
Maximum bar diameter: 16 mm, Min-Max distance between revolver and Spindle head: 48,5-113,5 mm,Revolver slides adjustment: 15mm, Revolver Slides Max Travel: 50mm, Travel of cross-slides: 32mm (4x withoun and 3x wth indexing plate), Driven by 4 KW Pole-changing Flanche Motor,Max. Ground Dimensions 1700x1120 mm, Hight: 1700 mm, Weight: 1800 KG, With all Documentat...
3
Bar feeder
Jwlyui
brand: IEMCA
type: AS325
new in: 2003
spindle passage 25 mm
turning speeds 5750 U/min
Rest 4
turret head 8
thread cutting attachment
bar loader LNZ Hydrobar
total power requirement kW
Gb77wpjpu
weight of the machine ca. t
dimensions of the machine ca. m
Magna 26 / 36 Multislide lathe / THE ULTIMATE TURNING AND MILLING CENTRE - 6 Axis ( Ø 26mm - 36mm )
MUPEM ( ex. Traub Spain )
Attention! It is a new machine. The production time is 3-4 months after ordering!
For details, please refer to the attached brochures or our website!
Unbeatable for mass production !
-----
The MAGNA model is a very appropriate lathe for general purpose screw cutting of small parts and soft-medium materials. Its capability of working with up to 5 tools simultaneo...
10
STAR - RNC-16 - 1989
Bi7bgllku0
3
Bar feeder is from a Gildemeister CTX 200 and is no longer needed.
all attachments are included.
Bqawsaz2co
Turret Automatics with Rotary-Transfer Unit, Overall base dimensions 1700x1120x1700 mm, Weight: 1800 kg, Nominal power: 4 KW,
Maximum bar diameter: 16 mm, Min-Max distance between revolver and Spindle head: 48,5-113,5 mm,Revolver slides adjustment: 15mm, Revolver Slides Max Travel: 50mm, Travel of cross-slides: 32mm (4x withoun and 3x wth indexing plate), Driven by 4 KW Pole-changing Flanche Motor,Max. Ground Dimensions 1700x1120 mm, Hight: 1700 mm, Weight: 1800 KG, With all Documentation in Ge...
9
Hydrobar still in production.
LNZ HYDROBAR SWISS
Dkmkmcdza
BARR FEEDERS IS POSSIBLLE TO PICK UP IN SWITZERLAND BEFORE EXPORT IN EU. We can organize dismantling and loading and transport
spindle passage 25 mm
turning speeds 5750 U/min
Rest 4
straight turning atchm. - working travel . mm
turret head 8
thread cutting attachment
Iwpyxgw
bar loader LNZ Hydrobar
type 6.32HS-4.4
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
4
- YEAR OF MANUFACTURE: 2000
BAR WIDTH: 20 mm
MANDRIN: 10000 rpm; 3,7 - 5,5 Kw
COUNTERMANDRIN: 8000 rpm; 1,5 - 2,2 Kw
X1 AXIS COURSE 50mm
X2 AXIS TORQUE 50 mm
AXIS THROW X3 221 mm
AXIS THROW X4 316 mm
Y1 AXIS COUPLING 190 mm
Y2 AXIS COURSE 190 mm
Y4 AXIS COURSE 137 mm
Bp3zyg3zlv
Z1 AXIS COURSE 220 mm
Z3 AXIS COURSE 205 mm
Z4 AXIS TRAVEL 315 mm
CONTROL: FANUC
3
Short loader FMB SL 80S
Bnow2qkqgy
Year of construction: 2011
Bar length: up to 1500mm
Max. bar diameter: 80mm
6
We are selling cnc lathe XP-20s, together with bar feeder SN-542 (3m). Machine have twin spindels and without live tools. Max. material diameter is 42 mm.
It is removed from our production and occasionally reports a y-axis error. (could be only limit switch).
Machine could be sold separately (lathe or bar feeder)
Cd2lcqmx0
For more details, please contact us...
15
BIGLIA B301M CNC in perfect condition, with bar feeder, chip conveyor and plenty of tools. Machine was used at a Danish plastic prototype manufacturer, serviced and maintained regularly.
All documentation.
max. bar clearance Ø : 45 [mm]
- max. machining Ø : 220 [mm]
- max. Ø on workbench : 400 [mm]
- max. machining length : 380 [mm]
- strokes X x Z : 160 x 380 [mm]
- quick feed speed X, Z : 20, 24 [m/min]
- max. spindle speed : 5000 [Rpm]
- main spindle power : 11/15 [kW]
- main spindle cone ...
15
Barr feeder
IEMCA CNC BOSS 542 BARR FEEDER
CNC BOSS 542/32
Tcfe2bul
BARR FEEDERS IS POSSIBLLE TO PICK UP IN SWITZERLAND BEFORE EXPORT IN EU. We can organize dismantling and loading and transport .
Pick up will be possiblle after 05.02.2021
spindle passage 25 mm
turning speeds 5750 U/min
Rest 4
turret head 8
thread cutting attachment
bar loader LNZ Hydrobar
type 6.26HS-4.4
total power requirement kW
weight of the machine ca. t
Bnhz0qy87d
dimensions of the machine ca. m
8
machine with bar loader LNS EXPRESS 332
Jfds3fx
1
Control Siemens
Bar diameter 42 mm
Sindle speed 2250 1 / min
Hexagonal machining
Bj3rx3ok38
Bar loading magazine
9
Technical Details follow soon
Ysroxs
13
Machine complete with Iemca loader
Good general conditions and immediately available
Vttbny
15
Barr feeder
IEMCA CNC BOSS 542 BARR FEEDER
CNC BOSS 542/32
Dklyp2she
BARR FEEDERS IS POSSIBLLE TO PICK UP IN SWITZERLAND BEFORE EXPORT IN EU. We can organize dismantling and loading and transport
spindle passage 25 mm
turning speeds 5750 U/min
Rest 4
straight turning atchm. - working travel . mm
turret head 8
thread cutting attachment
total power requirement kW
weight of the machine ca. t
Oi9u7
dimensions of the machine ca. m
1
10
manufacturer. Ergomat
Type: A 15 E
Year of construction: 2007
Spindle passage
Round: 15 mm
Hexagon: 13 mm
Square: 10 mm
max. distance between collet chuck and tailstock: 240 mm
turning length with long turning device: 70 mm
Minimum: 30 parts/hour
N7qf2
Maximum: 1500 parts/hour
Main engine power: 2.2 / 3.0 kW
max. speed : 6500 1/min
Travel path vertical slide: 22 mm
travel distance horizontal slide: 22 mm
Net weight: 560 kg
Dimensions without bar feeder: 1100 x 500 x 1560 mm
10
Sinumerik 840C (Index C200-4)
2rclxa
C-axis
1x 8-fold revolver with driven tools
1x 6-fold revolver
bar loading device Schmid LM3200
chip conveyor
coolant device
Technische Daten / technical details:
Spindeldurchlass / spindle hole 52 mm
Planweg X1 / cross way X1 90 mm
Längsweg Z1 / longitudinal way Z1 280 mm
Planweg X2 / cross way X2 81 mm
Längsweg Z2 / longitudinal way Z2 80 mm
Drehzahl / spindle speed 5000 UpM /rpm
Eilgang Revolver 1 X, Z / rapid feed revolver 1 X, Z 24, 24 m/min.
Eilgang R...