Used Can Press, Packing Press 70 T Press Force for sale (92,381)

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Nwjdpfx Akjhyc Nwecsi Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, pressing force: 300 t, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Nsdpeh Agnuofx Akcswi Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: new, Year of construction: 2025, Vertical design for splitting short and long logs Low base plate for easy and strain-free loading of large logs Mechanical log lifting device brings heavy logs into position while protecting the back Equipped with a log catching bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Convenient transport with a manual drawbar, thanks to the standard chassis with hard rubber tires and an additional support wheel Impact and scratch-resistant due to high-quality powder coating Space-saving storage due to the easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/Depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Power consumption: 3.5 kW Nedpfehkz Hmex Akcswi Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Device data Splitting force max.: 14 t Splitting length min.: 560 mm Splitting length max.: 1040 mm Log diameter min.: 100 mm Log diameter max.: 300 mm Hydraulic system Hydraulic oil tank capacity: 7.5 l Location: In stock at 54634 Bitburg - available immediately - Subject to prior sale.

Condition: good (used), CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate Nwedozh D E Repfx Akcoi 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw Nsdpshfufgjfx Akcowi -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -for: Harbs K2V folding machine -Max. Pressure: 70 bar -Motor: 0.75 kW 1400 rpm Nodpfx Akjdwc I Iecjwi -Dimensions: 650/460/H600 mm -Weight: 60 kg

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature testing cabinet Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Nwodpozg Ty Iefx Akcoi Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used,  Schuppenauslage mit integrierter Presseinrichtung / Mobile delivery with pressing device Heidelberg SPH-70 Schuppenauslage mit Presseinrichtung / Stream delivery with pressing device Heidelberg SPH-70 Nwodpfx Akjyldg Rjcoi Baujahr / Year 2016 - Serial-No. 1224446842 Size min. 40 × 75mm - max. 700 x 1000mm Produktdicke / Product thickness max. 4 mm Presskraft / Pressing force 12.000N Anzahl der Nutzen / Standard no. of UPS max. 2 - 4 Einlaufhöhe / Infeed height 400 - 1000mm Steuerung MCT1 Bedienpult mit Display MCT control system1 control panel with display Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2018, operating hours: 24,849 h, lifting height: 4,610 mm, free lift: 1,560 mm, fuel type: gas, mast type: triplex, fork length: 1,190 mm, fork width: 1,100 mm, total height: 2,200 mm, total length: 3,700 mm, total width: 1,180 mm, color: grey, Lifting capacity: 3.000 kg - Year: 2018 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 517387J00054 - Operating hours: 24849 - Lifting capacity: 3000kg Nwodpeywt N Hofx Akcsi - Lifting height: 4610mm - Overhead clearance: 2180mm - Free lift: 1560mm - Fork length: 1190mm - Maximum fork width: 1100mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Heating, Full cabin, Free-lift - Mast: Triplex - Inspection valid until: 12-2026 - Drive: LPG - Motor brand: Izusu - Transport dimensions: 3705mm x 1180mm x 2200mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, functionality: fully functional, Year of construction: 2015, fuel type: gas, Forklift Still RX70 - 35 T Year of manufacture: 2015 Lifting height: 3.50 m Nodpfx Akoy Itrvscewi Full cabin with heating Radio Air conditioning 2 x free auxiliary hydraulics

Condition: as good as new (ex-display), Year of construction: 2026, Horizontal Bending press Zopf Nwodpfxegrydbo Akcei - model T 200 with automatic backgauge - programable backgauge 1000 mm with - year of construction 2026 - demo model - length of stroke 185 mm - weight 500 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 100 mm Touch screen with programming of the stroke and backgauge demo model

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 Nsdpfxowbvmie Akcjwi V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, Year of construction: 1995, functionality: limited functionality, cutting force: 800 t, empty load weight: 190,000 kg, type of input current: three-phase, Arnold HS850 Scrap & Metal Presse Die Maschine befindet sich derzeit in transportbereitem Zustand. master cylinder cylinder force: 850 t press: 0.08m/s hold-down cylinder cylinder force: 100t / per cylinder Nsdpfx Ajh T Dctskcjwi feed cylinder: cylinder force:100t cover cylinder: cylinder force:100t main dimensions total length:16175mm total width:5200 total height: 6420 mm Dimensions: Passage width at the scissor stand: 800mm passage height at the scissor stand: 800mm total height: 6000mm weights: scissor stand with cutter bar: 60 ton feed device approx: 85 ton total weight: about 170 tons required amount of oil: 5200 liters connection value of the machine: 220kw If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 800 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 80 to. - length of stroke 300 mm - bending speed adjustable Nwsdpfx Ajd A Nc Djkcei - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg - bending capacity: flat material max. 300x32 mm at Vmax round tube 3/8" - 3" gas pipe

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months Nwjdpfx Ajwag Riskcji ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling Nodpfx Aksk S Dt Tocowi - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 20 t, Hydraulic 20 T single-column production press for the manufacture of lightweight concrete parts. Here are the technical data of the offered machine: If the press does not exactly meet your requirements, please click here to request an individual offer exactly according to your wishes: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly favourable prices! Nwjdpfxjia Nc Ts Akcoi Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Maximum open height 300 mm d) Pressing speed 4 - 10 mm/sec. ( adjustable via rotary control ) e) Die size 600x800 mm f) Ram size 950x600 mm g) Manual lubrication (via grease nipple) h) Pressure setting from 5 T to 20 ( adjustable via rotary control ) i) Travel 300 mm j) Installation, commissioning, instruction at extra charge Technical Data Press type C Press, hydraulic Thermal neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel on steel Max. 3 sec. Dimensions Max. Opening width 350/50 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 1900 mm Hall height min. 2,500 mm Parallel deviation at 20°C +/- 0.4 mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.6 mm/m Weight Total weight of the press without operating materials approx. 2.2 to Speeds Fast closing with 10 mm sec. Press speed 10-5 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of press cylinders 1 pc. Plus 1 ejector, 110 mm stroke, max. operating pressure 255 bar Pressing pressure build-up time 03. apr sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/ASC approx. 6 L/min Oil volume approx. HLP 46 D 100 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 4 kW (C-press, hydraulic press, hydraulic press, concrete press) Are you looking for a customised machine? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), the EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply in all points with the national Brazilian safety directive NR 12, which is based on these. Our great strength is the construction of special machines and press automation. We sell customised hydraulic presses, press brakes and impact shears at surprisingly favourable prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: used, Eccentric Press, Köszeg (Elzett) 6.3 Tons, Used Machine Manufacturer: Köszeg (Elzett) Overall dimensions: Nwsdpey R Eb Iefx Akcsi Width: 600 mm Depth: 800 mm Height: 1600 mm Weight: 252 kg Pressing force: approx. 6.3 tons Stroke length: 130 mm Table size: 280 × 170 mm

Condition: used, mileage: 51,811 km, power: 132 kW (179.47 HP), first registration: 02/2020, fuel type: diesel, overall weight: 7,000 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 18 m³, loading space length: 4,100 mm, loading space width: 2,245 mm, loading space height: 1,988 mm, Year of construction: 2020, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, tail-lift, DAILY 70 C 18 BEVERAGE Flatbed/Tarpaulin 4 m * AUTOMATIC * 3-row rear load securing system * LASI VDI 2700 * Payload approx. 3,482 kg * Vehicle number for customer inquiries: 4009 * Euro VI engine version Nwedpfeumftaox Akcji * EBS (Electronic Braking System) * Tail lift * Electronic Stability Program (ESP) * Double passenger seat * Particulate filter * ABS brakes * Electric windows, driver and passenger doors * Central locking with master key operation * Driver airbag * Bluetooth * Power steering * Heated and electrically adjustable exterior mirrors * Three-seater * Full service history No liability for printing or typographical errors Sale to commercial customers only Errors and prior sale excepted. Modifications, prior sale and mistakes expressly reserved. The description serves solely to identify the vehicle and does not constitute a warranty in the sense of contract law. The vehicle specification in the purchase contract is decisive. * TOP SERVICE + QUALITY * We are happy to offer you a LEASING-FINANCING-HIRE PURCHASE proposal Warranty insurance available on request from the insurer * TÜV / UVV LBW / tachograph check and installation of OBU unit through our local partners * 30-day export license plates All export documents can be provided on request, but must be inquired about individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * ARRIVAL STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit our website at * more than 200 vehicles always in stock

Condition: used, mileage: 51,811 km, power: 132 kW (179.47 HP), first registration: 02/2020, fuel type: diesel, overall weight: 7,000 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 18 m³, loading space length: 4,100 mm, loading space width: 2,245 mm, loading space height: 1,988 mm, Year of construction: 2020, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, tail-lift, DAILY 70 C 18 BEVERAGE Flatbed/Tarpaulin 4 m * AUTOMATIC * 3-row rear load securing * LASI VDI 2700 * Payload approx. 3,482 kg * Vehicle no. for customer inquiries: 4009 * Engine type Euro VI * EBS * Tail lift * Electronic Stability Program (ESP) * Double passenger seat * Particulate filter * ABS brakes * Electric windows, driver and passenger side * Central locking with master key * Driver airbag * Bluetooth * Power steering Nedowm Ta Djpfx Akcowi * Heated and electrically adjustable exterior mirrors * Three seats * Full service history No liability for printing or typographical errors Sale exclusively to businesses Subject to error and prior sale.* Changes, prior sale, and errors excepted. The description is for vehicle identification and does not constitute a warranty within the meaning of sales law. The description in the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to provide a LEASE-FINANCE-INSTALLMENT PURCHASE offer Warranty insurance available on request from insurer * TÜV certification / UVV LBW / Tachograph test and OBU device installation available by our local partners * 30-day export license plates available All export customs documents possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ) railway station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit us on our website at * Always over 200 vehicles in stock

Year of construction: 2026, condition: new, functionality: fully functional, • A vertical guillotine shear with a 3 mm or 6 mm steel cutting capacity on a 3 m width, with a motorized back gauge, an optical system for contour cutting, and an optional pneumatic sheet support. • A 50 or 100 T press brake with a 3 m distance between uprights, with 3 digitized axes (X, the back gauge, and synchronization of the left Y1 and right Y2 cylinders). A CYBELEC touch-screen CNC control with digital or graphical programming. Features: With minimal floor space in the workshop, you have the equivalent of 2 high-end conventional machines: • A vertical guillotine shear equipped with a motorized back gauge (700 mm length), an optical system for contour cutting, proportional clamping relative to the cutting force, 2 reversible 4-sided blades, and an optional pneumatic sheet support. • A press brake equipped with a motorized back gauge (700 mm length) and fully electronic angle management with 2 digital rulers (synchronization of the left Y1 and right Y2 cylinders with force management), allowing bending either in a single stroke or in the air with a positioning accuracy of 0.04 mm. - Distance between uprights = 3200 mm - Unlimited bending capability, as there is no interference with the gooseneck! - Direct angle programming + graphical programming with automatic calculation of the developed length and 2D bending simulation. - Automatic pressure control in real time. - A complete set of tooling with a 9-V die + gooseneck punches + adjustable punch holders. - A 2-year warranty. Available in several versions: - Cutting capacities: 3 or 6 mm steel Nwjdpfx Aezcyx Dekcei - Cutting lengths: 1250 / 2040 / 3040 mm - Bending pressure: 50 and 100 T - Bending lengths: 1400 / 2200 / 3200 mm - Cybelec graphical CNC control, 3 axes. More than 1000 installations in Europe. Inquire now! With the COMBI and its 3 digitized axes X, Y1, Y2, you really have the equivalent of 2 excellent machines, with the added benefit of technology typically intended for industrial applications (Y1 Y2 synchronization). Since 2004, JC COLOMBO has been distributing the COMBI combined shear and press brake. With ideal capabilities for locksmithing and metalworking activities (3040 x 6 mm shear and 3200 x 75 T bending), the COMBI allows all companies that do not have space for 2 conventional machines to equip themselves and become fully self-sufficient and much more responsive to complete projects. Workshops with 100 m² and 2 employees have opted for the COMBI! A 50 T version has also been specifically designed for the production of cladding for aluminum joinery companies. Furthermore, with equipment such as the automatic sheet support for the shear, the Y1 Y2 cylinder synchronization, and the direct angle setting program, the customer really has the equivalent of 2 excellent industrial-grade machines at a lower cost. To date, more than 600 professionals use the COMBI in France.

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Max. working area: 883 mm Nedpfey Nbtkjx Akcswi MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic power unit Control panel

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 517314V00020, Year of construction: 2019, operating hours: 17,191 h, load capacity: 1,600 kg, lifting height: 5,220 mm, free lift: 1,700 mm, fuel type: gas, fork length: 1,150 mm, TECHNICAL DETAILS Lifting capacity: 1,600 kg Lifting height: 5,220 mm Free lift: 1,700 mm Fork dimensions: 1,150 mm x 910 mm Minimum fork width: 200 mm MACHINE DETAILS Number of wheels: 4 Engine manufacturer: Still VW Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 2,975 mm x 1,099 mm x 2,260 mm Transport weight: 2,706 kg Operating hours: 17,191 h EQUIPMENT 4th valve for fork carriage Nedpfxoyh Ngro Akcjwi Side shift Work lights Heater Non-marking tyres Full cabin

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 517387V00052, Year of construction: 2019, operating hours: 4,261 h, load capacity: 3,000 kg, lifting height: 3,270 mm, mast type: duplex, fork length: 1,190 mm, fork width: 1,230 mm, TECHNICAL DETAILS Lifting capacity: 3,000 kg Lift height: 3,270 mm Clearance height: 2,325 mm Nodeyd Txaspfx Akcowi Fork length: 1,190 mm Max. fork width: 1,230 mm Min. fork width: 430 mm Mast: Duplex MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,230 x 2,325 mm Unladen weight: 4,443 kg Number of wheels: 4 Drive: LPG Operating hours: 4,261 h EQUIPMENT Fork positioner Side shift Joystick Full cabin Heater Work lights

Condition: used, functionality: fully functional, Item: AV-12236-Vertical70m3 Exterior dimensions: Dia Ø 3450/3600 mm Total height 9000 mm. Vertical, insulated stainless steel tank – 1 pc. Conical bottom with 4" outlet. Nsdpfsxbcqrsx Akcjwi Conical top with ventilation. Manhole in the lower part of the cylinder. AISI 304.