Horizontal bending press T 800

ZOPF T 800

Condition: new, 800 kN stroke length max. 285 mm Fpodpfx Aoy H N Nbsansp working feed 10 mm/sec return speed 20 mm/sec 750 x 1430 mm work height max. 940 mm total power requirement 4 kW bending capacity max. - flat 300 x 32 mm bending capacity max. - round 89 x 4,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any work roll diameter: 120 mm barrel length: 150 mm Fjdpfxep E Egle Aanepp backup rolls: backup block/chain

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Fodpfxsqmi Ire Aanspp Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: used, Year of construction: 1988, functionality: fully functional, overall weight: 2,200 kg, Distance between centres 1200 mm Speed A) 70 - 380 U/min. turning speeds B) 380 - 2000 U/min weight 2,2 t +++++ Please note: Fpsdpfx Aaek Sat Djnep The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2018, condition: as good as new (ex-display), Welding rotary table KT 50 Load capacity, horizontal: 50 kg, tilted: 25 kg Power supply: 220 V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, width: 650 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Fpedjd A Etyepfx Aanep Speed: 1.7 – 15 rpm Includes foot-operated remote control

Condition: used, Year of construction: 1997, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Machine in a well-maintained condition (!!) with only approx. 31.800 operating hours - in checked condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled back stop (X1 + X2 axis) - CNC controlled height adjustment of the back stop (R1 + R2 axis) - CNC controlled adjustment of the stop fingers (Z1 + Z2 axis) - CNC controlled, pneumatic die displacement (I axis) - CNC WILA electro-motoric table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manuel Lower tool clamp - 1x freely movable 2-hand / foot control Fsdpfxexacfms Aanjpp - Safety device at the rear (sliding door) - Safety device at the side (swinging door) - Original operating instructions + spare parts list

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH planetary concrete mixers enable the production of homogeneous concrete in a short time thanks to their high-performance mixing technology. In planetary mixers, the mixing arms rotate both around their own axis and around the center, ensuring that every part of the mixture is processed evenly. Thanks to this unique design, it is possible to produce concrete with a perfect consistency in as little as 30 seconds after adding water. Planetary mixers stand out from classic twin-shaft mixers with their energy efficiency, cement savings, and superior durability. Planetary Concrete Mixer Technical Specifications MODEL: CPLN - 0.5 Loading Volume: 750 liters Fresh Concrete Volume: 625 liters Compacted Concrete Volume: 500 liters Motor Power: 18.5 kW Lower Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard Fpsdpfx Aoxp U S Djanep MODEL: CPLN - 0.75 Loading Capacity: 1000 liters Fresh Concrete Volume: 875 liters Compacted Concrete Volume: 750 liters Engine Power: 30 kW Bottom Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 1 Loading Capacity: 1,500 liters Fresh Concrete Capacity: 1,250 liters Compacted Concrete Capacity: 1,000 liters Engine Power: 45 kW Lower Wear Plates: 15 mm Hardox 450 Side Body Wear Plates: 8 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 1.5 Loading Volume: 2,250 liters Fresh Concrete Volume: 2,000 liters Compacted Concrete Volume: 1,500 liters Motor Power: 2 x 30 kW Lower Wear Plates: 10 mm Hardox 450 Side Body Wear Plates: 10 mm ST 52 Mixing Arm Wear Plates: 25 mm Ni-Hard MODEL: CPLN - 2 Loading Volume: 3,000 liters Fresh Concrete Volume: 2,500 liters Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Bottom Wear Plates: 15 mm Hardox 450 Side Body Wear Plates: 12 mm ST 52 Mixing Arm Wear Plates: 30 mm Ni-Hard Why Choose CONSTMACH Planetary Concrete Mixers? CONSTMACH manufactures mixers that deliver maximum performance even under the most demanding production conditions, backed by years of engineering experience. Each model is equipped with high-quality materials and CE-certified motors. Our planetary mixers secure your investment with low maintenance costs, high mixing efficiency, and a long-lasting design. Additionally, optional chrome carbide coatings, additional discharge covers, and different mixing arm options ensure full compliance with your production needs. For professionals seeking durability, efficiency, and technical excellence, CONSTMACH Planetary Concrete Mixers are the smartest investment choice in their class. What Does Constmach Do? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any Fpsdpfsp E Ed Rox Aansp work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Condition: new, Year of construction: 2026, Maximum pressure: 20 tons Stroke length: 200 mm Maximum speed: 10mm/sec Return speed: 20mm/sec Work table: 480x1060 mm Working height: 900 mm Oil tank: 10 Liter Maximum workpiece height: 200 mm Strip capacity: 200x12 mm Pipe capacity: 48x4.0 mm *not with standard tools Fsdshgib Nopfx Aanopp - Digital limitation of the stroke and the return stroke. - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 3,425 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis MECAL MC 305 vertical machining centre was manufactured in 2004. It features a powerful 5.5 kW electric spindle, air-cooled, with a maximum speed of 18,000 RPM and an ISO30 tool holder. The tool magazine is centrally located, protected, and supports various tools. It has a standard workpiece length up to 4000 mm and an extended range up to 8000 mm. Contact us for more information about this machine. • A (rotation): ±125° • Spindle Type: Electric, air-cooled Fsdpfsx D I Hkjx Aanspp • Tool magazine: • Located in the middle of the machine base in a protected area • Accommodates various tools: milling cutters, taps, end mills, angle heads • Construction: • Welded steel structure for maximum rigidity • Linear guides with ball screws • Automatic central lubrication of guides and screws • Cooling: Centralized minimum lubrication system (MQL) • Working range: • Standard workpiece length: up to 4000 mm • Extended range (differential cycle): up to 8000 mm