Used Contour Sanding Machine for sale (65,147)

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Gbedst Tqy Eopfx Al Sou Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, -Continuously adjustable sanding unit (0 - 90°) Gsdpfovxkv Usx Al Sobu for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: ready for operation (used), Year of construction: 1993, Langzauner LZK 4 edge sanding machine with oscillating veneer edge sanding unit Sanding unit infinitely adjustable from 0- 45° miter fence Oscillation Gbedpfxouacg Aj Al Ssu Height-adjustable sanding beam to utilize the entire belt width Table size 1250 x 350 mm Motor power 3kW Belt length 3000 mm Belt width 200 mm Belt speed 22m/sec Weight approx. 450 kg Space requirement 1900 x 900 mm year of construction 1993 Condition checked for function Price 5500.-

Condition: good (used), Code: 0449 Brand: DE STEFANI Model: MV 1 Automatic single-head edge sander for wooden edges and profiles, solid wood, veneered and various Sander for profiles and rebates with interchangeable pad, tiltable -15° to +90° 2-speed motor rpm 710/1420 – Hp 1,3 – 2,5 Working height mm 100 Automatic feed with variable speed Adjustable inlet guide Compressed air 6 atm Exhaust outlet diameter 100 mm Overall dimensions mm 2100 x 1600 x 1350 h Gsdpfxjzmyp Ao Al Sobu Weight kg 950

Condition: used, Vertical grinding machine, surface grinding machine DORMAC / DORIA type Perseo Cup grinding machine No. 786 Year of manufacture 1987 Sanding area 500 x 250 mm Magnet 400 x 150 mm Grinding height grinding wheel - magnet approx. 190 mm Grinding height grinding wheel - clamping surface table approx. 235 mm Grinding wheel diameter 175 mm Table longitudinal movement approx. 600 mm Grinding wheel speed approx. 2800 rpm Motor power approx. 2.2 kW Mains connection 380 Volt, 50 Hz - Manual depth adjustment via handwheel, travel per handwheel rotation, Z-axis 2.5 mm = 0.01 mm per graduation mark - handwheel on the right of the spindle housing, fine adjustment via knurled wheel on the handwheel Gjdsvkgvhspfx Al Sobu - Manual transverse adjustment via handwheel, travel per handwheel revolution, Y-axis 2 mm = 0.01 mm per graduation mark - Hydraulic longitudinal table movement - mechanical magnet WAGNER, type 0112N-15/40-4 400 x 150 mm, height 45 mm - Wet grinding unit with settling filter opposite - 2 grinding wheels Ø 175 mm - 1 grinding wheel holder - 1 balancing device for the grinding wheels Space requirement L x W x H 1500 x 1100 x 1800 mm Weight 570 kg good condition

Condition: used, Used Machine Year of Manufacture: 1988 Features and Technical Specifications: - Length of work tables: 1440 mm Godpfx Aljzk Ny Eo Sobu - Total width of the two work tables: 710 mm - Tilt adjustment of the work tables: 0–30 degrees - Working pressure: 6 bar - Sanding belt length: 2170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10–20 m/sec - Vertical adjustment of the oscillating unit: 125 mm - Air consumption: 25 NL/min - Electrical specifications: 400 V / 2.9 kW Weight: 490 kg Availability: available shortly Location: Röllbach

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Gjdpey H N Tmefx Al Ssbu Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Year of construction: 2015, condition: excellent (used), vertical automatic flat glass sand blasting machine with 4 air guns Gjdpfoz Dt T Tsx Al Sobu working height : 2000 mm OPEN TOP including air compressor and dryer . voltage : 230/400 V 50 Hz

Condition: used, functionality: fully functional, type of input current: three-phase, grinding width: 150 mm, grinding length: 2,170 mm, SCM UNILEV 15N – Professional edge sanding machine with oscillating belt Professional Italian wood sanding machine for wood, wood-based materials, and plastics. For sale, I offer the SCM UNILEV 15N – a high-quality edge sanding machine from the renowned Italian manufacturer SCM, designed for professional wood processing, wood-based panels, composites, and plastics. The UNILEV model is valued for its robust construction, high precision, and durability. Thanks to the oscillating sanding belt, it ensures even sanding, a longer belt life, and very good surface quality. The manufacturer describes this series as a universal sanding center with a vertical oscillating belt. Technical data: Manufacturer: SCM S.p.A. (Italy) Gbodpfxsziz Hbs Al Sou Model: UNILEV 15N Serial number: KK/012309 Power supply: 380 V / 50 Hz Motor power: 3.22 kW Rated current: 7.1 A Weight: approx. 413 kg Operating parameters of the UNILEV model: Sanding belt: 2170 × 150 mm Oscillation of the sanding belt Height adjustment of the sanding unit Adjustable work tables Ability to sand at an angle Stable, heavy-duty industrial construction Connection for dust extraction system Operation with two belt speeds (depending on machine configuration) Application: The machine is ideal for sanding: solid wood, MDF boards, HDF boards, plywood, chipboards, laminated boards, composite materials, plastic components, straight edges, flat surfaces, profiled elements, arcs and curved surfaces, ribs and other details requiring precise finishing.

Condition: excellent (used), Year of construction: 2023, For sale is a JET drum sander 2244 equipped with a 1.8 HP motor and a maximum sanding width of 560 mm. The machine is in excellent condition and has been inspected and refurbished by our service team. Technical specifications: - Sanding width: 560 mm (1120 mm) - Sanding thickness: 0.8 – 102 mm - Infinitely variable feed rate: 0 – 3 m/min Gsdpfoyzqtqjx Al Ssbu - With oscillation - Drum speed: 1450 rpm - Suction connection Ø 100 mm - Motor power: 1.8 HP / 230 V - Year of manufacture: 2023 / as new The machine is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: JET 2244, drum sander, cylinder, oscillation, sanding machine Reference: R-L0B6O

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: VO995, total length: 1,700 mm, total width: 1,000 mm, total height: 1,150 mm, table length: 880 mm, table width: 370 mm, overall weight: 260 kg, power: 2.2 kW (2.99 HP), grinding width: 150 mm, grinding length: 2,580 mm, Machine type: LVO 120, Machine number: VO995, Year of manufacture: 2009, Main motor: 2.2 kW, Oscillating motor: 0.11 kW Gbedpfx Aljy Nznuo Sju

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Gedpfezkbirox Al Sobu Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1985, Edge sander for solid wood Gedpfx Aloir Ukuj Sebu with a star-shaped sanding pad for rounding edges with oscillation

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Gbsdszuzb Aepfx Al Sou Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1998, Belt sanding unit for machining workpiece side surfaces with pneumatic belt tensioner. Technical data: Belt sanding unit: - Tilting device from -1° to +15° - Belt size 2500 x 100 mm - Cutting speed 18/36 m/s Gbjdpfxsxqqczs Al Sou - Motor 3.7/4.4 kW - Two-roller device for free-belt sanding. Roller diameter 75 mm, adjustable center distance from 225 - 320 mm - Swiveling horizontal slide, stroke 130 / 220 mm, operated via handwheel - Fixed mounting for sanding unit - Feed device, pneumatically controlled, stroke 5 - 20 mm Table unit: - Linear workpiece carrier table with automatic feed, travel 700 mm, clamping surface 300 x 250 mm, working speed from 15 - 150 mm/s, working travel freely programmable by the automation - Cable carrier track for cable management and pneumatic hoses - Clamping of workpieces by spring, release by pneumatic cylinder

Condition: used, LASM belt edge grinder, Double-sided grinder, capable of sanding on a platen or a flat surface, 380V power supply, 3KW motor, 150mm wide abrasive belt, Oscillation, Gedpfx Alszxz Taj Sjbu Angle-adjustable table, Used machine, ready for operation.

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Gbsdpfewgc D Sex Al Sju Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; The machine is supplied with an assortment of sanding belts; A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. - Swivels 90-180° - Motorized belt oscillation - Small support table on the idler pulley - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 2,200 mm, overall weight: 2,000 kg, input voltage: 380 V, grinding belt width: 80 mm, input frequency: 50 Hz, Direction of machining: from left to right. Two belt sanding units with a traversing sanding pad (option to use profiled pads). Sanding units mounted on a cross column, with adjustable height, left/right positioning, and angle adjustment. Electronic system for adjusting the advance and retraction of the sanding pad, synchronized with the feed rate (changing the feed rate automatically adjusts the advance/retraction times of the pads). Adjustment of the pad pressure. Adjustment of the sanding belt tension. Oscillation of the sanding belt. Two sanding belt speeds. Max. sanding belt width: 80 mm. Feed rate is continuously adjustable using a variator. Gbodpfx Aezz Rh Sol Sou Pressure bar with pressure rollers (new pressure rollers). Additional lateral pressure.

Condition: used, Year of construction: 2000, used, top equipment, excellent condition, low hours Manufacturer: Johannsen Model: T94 Year of manufacture: 2000 Machine no.: 22138 CE type tested GS wood dust tested Motor: 5.5 / 0.25 kW Sanding length: approx. 2600 x 960 mm Sanding width: approx. 960 mm Belt length: approx. 7800 x 150 mm Table size: approx. 2790 x 960 mm Throat depth right: approx. 850 mm Electric adjustment Upper belt cover Upper sanding support Table lighting Belt speeds: 1434 m/min Right-left travel Gsdpfoyvvr Iox Al Sjbu Belt blow-off Sanding shoe: 300 x 140 mm Extraction connection: D 180 mm Required space: approx. 4000 x 1500 x 1500 mm Weight: approx. 1000 kg Total connected load: approx. 5.7 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1946, CB VERA 1000 sanding-brushing machine, fully functional. Sold together with brushes and interchangeable inserts for them. Gbjdpfjynkxrex Al Sju

Year of construction: 1991, condition: used, weight 240 kg max 50 mm Gbedpfxeztfvbe Al Seu ja serial number 2035

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Gbjdpfx Ajy Naq Uol Seu Number of belts: 2 Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim

Condition: ready for operation (used), maximum belt width 240mm mechanical oscillation unit spacing 200-1290mm screw-type belt tensioning star/delta starter manual adjustment of unit spacing cast iron housing dimensions of the side table 920x350mm two 7.5kW motors Gedpfx Aszhuv Hjl Sebu

Condition: refurbished (used), functionality: fully functional, Automatic profile edge sander DE STEFANI 1 sanding unit with adjustable sanding belt (interchangeable profiled or straight pads) unit tiltable 0° to 90° timed approach and retraction of the sanding pad variable feed speed via feed belt variator sanding belt oscillation Gbodpfxovxt Hio Al Sju pneumatic blow-off of sanding belt robust rubber link feed belt telescopic pull-out support for large workpieces

Condition: used, Year of construction: 1999, Dear customers currently we offer a disc sanding machine of the brand Zimmermann. Here are some technical datas: Disc diameter: 600mm Table length: 755mm Gbodpfx Aloywx Die Ssu Table width: 285 mm Table tilling up and down: 30/45° Protractor: 60/60° Power: 3,5 kW Speed: 1.500 rpm Dimensions: L 90 cm x B 65 cm x H 130 cm Weight: 290 kg with protractor We are looking forward to your questions and inquiries.