Used Corema Prc 2.4/5,000 for sale (1,986)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 27,875 h, machine/vehicle number: 150204, laser type: CO₂ laser, laser wavelength: 10 nm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser type: CO₂ laser Average power: 200–5,000 W Peak power: up to 6 kW Wavelength: 10.6 µm Beam quality factor M²: < 2.4 (typically 2.1–2.3) Beam divergence: 1.5 mrad (half-angle) Beam diameter at the output: 15 mm (1/e) Beam diameter at the output: 21 mm (full beam) Pulse repetition rate: 0–2 kHz Pulse width: 250 µs Pulse resolution: 70 µs (?) Alignment stability: ± 150 µrad (?) Wavelength: 635 nm Gedozncm Hepfx Al Ssbu Output power: < 1 mW MACHINE DETAILS Ambient temperature: 10–40 °C Relative humidity: < 95% (non-condensing) Connected power: 37 kW Voltage: 400–460 V AC Voltage tolerance: ± 10 % Power connection: 3-phase Required cooling capacity: 45 kW Flow rate: 133 l/min Inlet temperature: 18–20 °C Maximum inlet pressure: 6 bar Nominal inlet pressure: 3 bar Differential pressure: 1.5 bar Cooling medium: Distilled water with 35 % Dowfrost HD Filter fineness: 100 µm Helium purity: 99.996 % Helium proportion: 67.7 % Helium consumption: 13.4–46.8 SLPH Carbon monoxide purity: 99.995 % Carbon monoxide proportion: 4.1 % Carbon monoxide consumption: 0.9–3.0 SLPH Nitrogen purity: 99.996 % Nitrogen proportion: 28.2 % Nitrogen consumption: 5.8–20.2 SLPH Total gas consumption: 20–70 SLPH Maximum proportion of water vapor, hydrocarbons, and oxygen: < 10 ppm Compressed air: dry Compressed air dew point: < 2 °C Operating hours (according to meter): 27,875 h

Condition: good (used), Year of construction: 2017, Standard turning diameter 150mm, maximum cutting diameter 255mm, maximum cutting length 685mm , Bar capacity main spindle 51mm, spindle speed 5,000rpm, sub-spindle 5,000 rpm, C axis 0.001 degrees, Gbodpfx Alezwm Hpe Sju 3 x turrets 24 stations, Y axis +/-45mm, milling speeds 6,000 rpm, main spindle 15kw, Fanuc 31i, swarf conveyor, barfeed unit, parts catcher

Condition: used, clear span: 3,600 mm, total length: 18,600 mm, total height: 5,000 mm, load per truss pair (max.): 4,000 kg, number of shelf rows: 1, Technical data for the pallet racking system: Racking system: Bito Type: PRO Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 18,600 mm Number of bays per racking row: 05 units, each 3,600 mm Number of levels plus base level: 02 units Included in the scope of delivery: 06x Pallet racking uprights, used Material color: sendzimir galvanized Upright profile: 100 x 65 x 2.0 mm Upright type: P3 Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted truss) 5,000 mm high 1,100 mm deep 20x Pallet racking beams, used Material color: blue Box profile: 150 x 50 mm Beam type: PT150S Clear span: 3,600 mm Max. load per beam pair: 4,000 kg with evenly distributed load 40x Locking pins, used Material color: sendzimir galvanized For securing the longitudinal beams against unintentional lifting Gbodoz Azktopfx Al Sou 24x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shims, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), functionality: fully functional, machine/vehicle number: 91584068, Year of construction: 2014, operating hours: 1,178 h, load capacity: 2,500 kg, lifting height: 200 mm, battery capacity: 344 Ah, battery voltage: 24 V, fork length: 2,350 mm, Equipment: UVV, power assisted steering, Jungheinrich EJE 225 Electric Low-Lift Pallet Truck, fully stainless steel Year of manufacture: 2014 Operating hours: 1,178 h Battery year: 05/2021 Battery capacity: 344 Ah at 24 V Load capacity: 2,500 kg Fork length: 2,350 mm Power steering Godjyi Hcpspfx Al Ssbu Current new price over €50,000 The truck can also be operated with the footplate folded up. Charger included The equipment works flawlessly and is ready for immediate use. Affordable delivery by a specialist company available. Have a look at our other listings as well. We always have many more high-lift and low-lift pallet trucks and forklifts in stock. Need spare parts for your forklift, high-lift pallet truck, etc.? Just contact us.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, spindle speed (max.): 5,000 rpm, controller model: INDEX C200-4, TECHNICAL DETAILS Main Spindle Spindle bore with collet clamping: 65 mm Spindle diameter in the front bearing: 100 mm Speed: max. 5,000 rpm Spindle nose according to ISO 702/1: Size 5 Torque at 100%: max. 62/95 Nm Power at 100%: max. 13/20 kW Turret 1 Number of tools: 8 Tool system according to DIN 69 880: 25 mm Indexing time for 1 station: 0.2 s Cross Slide 1 XZ Slide travel X-axis: 90 mm Slide travel Z-axis: 280 mm Feed force X-axis: 5,500 N Feed force Z-axis: 5,500 N Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Resolution X-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Turret 2 Number of tools: 6 Indexing time for 1 station: 0.25 s Cross Slide 2 XZ Slide travel X-axis: 81 mm Slide travel Z-axis: 80 mm Feed force X-axis: 8,300 N Feed force Z-axis: 5,500 N Rapid traverse X-axis: 16 m/min Rapid traverse Z-axis: 24 m/min Resolution X-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Driven Tools Speed: max. 6,000 rpm Torque: max. 8 Nm Tool holder bore: 25.4 mm MACHINE DETAILS Control system: INDEX C200-4 Correction accuracy: 0.001 mm Input accuracy: 0.001 mm Output accuracy: 0.001 mm Coolant system Pump capacity: 60 l/min at 5.5 bar Pump capacity: 20 l/min at 20 bar Gsdpfsz Im Urjx Al Sebu Filling volume: approx. 210 l Hydraulics Delivery rate: 19 l/min System pressure: 90 bar Filling volume: 50 l Dimensions & Weight Footprint: 3,708 (2,495) × 1,240 mm Height: 1,750 mm Floor space requirement without material handling: 3,708 (2,495) × 1,890 mm Weight: approx. 2,500 kg Three-phase connection: 400 V, 50/60 Hz Connected power: 20–45 kVA Protection of the mains supply line: 35–80 A EQUIPMENT

Year of construction: 2011, condition: ready for operation (used), Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dimensions X/Y: 150mm/2000mm, motor power: 4kW, weight: approx. 100kg. An on-site inspection is possible. A package sale is preferred. Gedpfxsy Eqtie Al Sjbu

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: LN6745, mileage: 149,862 km, power: 103 kW (140.04 HP), first registration: 02/2010, fuel type: diesel, empty load weight: 2,870 kg, maximum load weight: 1,730 kg, overall weight: 4,600 kg, next inspection (TÜV): 07/2027, fuel: diesel, color: green, driver cabin: other, gearing type: mechanical, number of gears: 6, emission class: euro4, number of seats: 7, total length: 6,360 mm, total width: 2,180 mm, total height: 2,250 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 3,300 kg, loading space length: 2,370 mm, loading space width: 2,000 mm, loading space height: 1,000 mm, trailer load braked: 3,000 kg, number of previous owners: 1, Equipment: ABS, airbag, central locking, electric window regulation, electronic stability program (ESP), hill-start assist, parking heater, power assisted steering, soot filter, trailer coupling, truck registration, Ford Transit 140T460 three-sided tipper truck, first owner Gbsdjzkmgpopfx Al Ssu formerly a municipal/government vehicle double cab with 7 seats low emission Euro 4 diesel particulate filter green environmental badge 6-speed manual transmission Eberspächer auxiliary heater trailer hitch, Ringfeder type 3,000 kg braked trailer load capacity 1 large toolbox 2 small toolboxes raised side boards and front panel cargo area cover LED rotating beacon twin-tire rear axle electric differential lock (EDS) power steering central locking with remote control driver and passenger airbags heated windshield electric windows electric exterior mirrors dimensions of the cargo area in mm: L: 2370 W: 2000 H: 1000 payload 1,730 kg unladen weight 2,870 kg permissible total weight 4,600 kg engine: 2.4 L - 103 kW TDCi catalytic converter well-maintained condition We sell exclusively according to our terms and conditions and exclude any warranty. Errors, changes, and prior sale are subject to change. We are available for you from Monday to Friday from 9:00 a.m. to 5:00 p.m. On Saturdays by appointment, outside these opening hours, telephone appointments are possible. We will gladly accept your current used equipment/vehicle as a trade-in. Sales to commercial businesses and exporters are given priority; this applies to our entire vehicle inventory. The aforementioned information is non-binding, errors/changes and prior sale are subject to change!!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: LN6745, mileage: 149,862 km, power: 103 kW (140.04 HP), first registration: 02/2010, fuel type: diesel, empty load weight: 2,870 kg, maximum load weight: 1,730 kg, overall weight: 4,600 kg, next inspection (TÜV): 07/2027, fuel: diesel, color: green, driver cabin: other, gearing type: mechanical, number of gears: 6, emission class: euro4, number of seats: 7, total length: 6,360 mm, total width: 2,180 mm, total height: 2,250 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 3,300 kg, loading space length: 2,370 mm, loading space width: 2,000 mm, loading space height: 1,000 mm, trailer load braked: 3,000 kg, number of previous owners: 1, Equipment: ABS, airbag, central locking, electric window regulation, electronic stability program (ESP), hill-start assist, parking heater, power assisted steering, soot filter, trailer coupling, truck registration, Ford Transit 140T460 three-sided tipper truck, first owner formerly a municipal/government vehicle double cab with 7 seats low emission Euro 4 diesel particulate filter green environmental badge 6-speed manual transmission Eberspächer auxiliary heater trailer hitch, Ringfeder type 3,000 kg braked trailer load capacity 1 large toolbox 2 small toolboxes raised side boards and front panel cargo area cover LED rotating beacon twin-tire rear axle electric differential lock (EDS) power steering central locking with remote control driver and passenger airbags heated windshield electric windows electric exterior mirrors dimensions of the cargo area in mm: L: 2370 W: 2000 H: 1000 payload 1,730 kg unladen weight 2,870 kg permissible total weight 4,600 kg engine: 2.4 L - 103 kW TDCi catalytic converter Gbedpfx Aljzkmiks Ssu well-maintained condition We sell exclusively according to our terms and conditions and exclude any warranty. Errors, changes, and prior sale are subject to change. We are available for you from Monday to Friday from 9:00 a.m. to 5:00 p.m. On Saturdays by appointment, outside these opening hours, telephone appointments are possible. We will gladly accept your current used equipment/vehicle as a trade-in. Sales to commercial businesses and exporters are given priority; this applies to our entire vehicle inventory. The aforementioned information is non-binding, errors/changes and prior sale are subject to change!!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: LN6745, mileage: 149,862 km, power: 103 kW (140.04 HP), first registration: 02/2010, fuel type: diesel, empty load weight: 2,870 kg, maximum load weight: 1,730 kg, overall weight: 4,600 kg, next inspection (TÜV): 07/2027, fuel: diesel, color: green, driver cabin: other, gearing type: mechanical, number of gears: 6, emission class: euro4, number of seats: 7, total length: 6,360 mm, total width: 2,180 mm, total height: 2,250 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 3,300 kg, loading space length: 2,370 mm, loading space width: 2,000 mm, loading space height: 1,000 mm, trailer load braked: 3,000 kg, number of previous owners: 1, Equipment: ABS, airbag, central locking, electric window regulation, electronic stability program (ESP), hill-start assist, parking heater, power assisted steering, soot filter, trailer coupling, truck registration, Ford Transit 140T460 three-sided tipper truck, first owner formerly a municipal/government vehicle double cab with 7 seats low emission Euro 4 diesel particulate filter green environmental badge 6-speed manual transmission Eberspächer auxiliary heater trailer hitch, Ringfeder type 3,000 kg braked trailer load capacity 1 large toolbox 2 small toolboxes raised side boards and front panel cargo area cover LED rotating beacon twin-tire rear axle electric differential lock (EDS) power steering central locking with remote control driver and passenger airbags heated windshield electric windows electric exterior mirrors dimensions of the cargo area in mm: L: 2370 W: 2000 H: 1000 payload 1,730 kg Gbsdpfx Alszkmi Ro Ssu unladen weight 2,870 kg permissible total weight 4,600 kg engine: 2.4 L - 103 kW TDCi catalytic converter well-maintained condition We sell exclusively according to our terms and conditions and exclude any warranty. Errors, changes, and prior sale are subject to change. We are available for you from Monday to Friday from 9:00 a.m. to 5:00 p.m. On Saturdays by appointment, outside these opening hours, telephone appointments are possible. We will gladly accept your current used equipment/vehicle as a trade-in. Sales to commercial businesses and exporters are given priority; this applies to our entire vehicle inventory. The aforementioned information is non-binding, errors/changes and prior sale are subject to change!!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 138616, turning length: 1,000 mm, turning diameter: 580 mm, spindle speed (max.): 5,000 rpm, controller model: Mazatrol Fusion 640 MT, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Max. turning diameter: approx. 580 mm Max. machining diameter: approx. 520 mm Max. turning length: approx. 1,000 mm Main spindle speed: up to 5,000 rpm Milling spindle speed: up to 12,000 rpm MACHINE DETAILS CNC control: Mazatrol Fusion 640 MT EQUIPMENT Main spindle Milling spindle with B-axis Y-axis C-axis Gbjdoz Inaispfx Al Ssu Chip conveyor Documentation, if available Coolant system Tool changer: automatic

Condition: reconditioned (used), This Duplo DBM-120 Booklet Maker with DBM-120T Trimmer provides a compact and versatile solution for producing professionally stitched, folded and trimmed booklets. With a booklet count of approximately 217,000, the system has been fully serviced, inspected and production tested by our engineers, ensuring it is ready to go straight into production. This particular machine also includes a purpose-built stand, positioning the booklet maker at a comfortable working height and making it considerably easier to operate when hand-feeding pre-collated sets. Ideal for digital printers, commercial printers and in-plant finishing departments, the DBM-120 can produce booklets at speeds of up to 2,400 booklets per hour. The system can process sets of up to 20 sheets of 80gsm, producing booklets of up to 80 pages, while the integrated DBM-120T fore-edge trimmer removes the open edge after folding to give each booklet a clean, professional finish. Key Features ✅ Approx. 217,000 booklet count ✅ Stitch, fold and trim in one production process ✅ DBM-120T automatic fore-edge trimmer ✅ Purpose-built operator stand for easier hand feeding ✅ Up to 2,400 booklets per hour ✅ Produces booklets up to 80 pages / 20 sheets of 80gsm ✅ Automatic setup for quick job changes ✅ 10 preset and 3 custom programmes ✅ Saddle stitching, side stitching, corner stitching and fold-only operation ✅ Automatic adjustment according to set thickness ✅ Fine adjustment of staple, fold and trim positions ✅ Twin staple heads ✅ 5,000 staple capacity per head ✅ Can be operated standalone or inline with compatible Duplo collators Ideal for Standalone Digital Print Production One of the advantages of this particular DBM-120 is the addition of its purpose-built stand. Gbodjz D H Nhopfx Al Sou The stand raises the system to a practical working height, making it much more comfortable for an operator to hand-feed pre-collated sets directly into the booklet maker. This makes the system particularly well suited to short and medium-run digital booklet production, without requiring a separate collating tower. Simply print and collate the sets digitally, hand feed them into the DBM-120 and the system takes care of the stitching, folding and fore-edge trimming. Simple Automatic Setup The DBM-120 has been designed for straightforward operation and fast job changes. The operator selects the required programme and the machine automatically adjusts for the job. Fine adjustments to the staple position, fold position and trim position can then be made where required and stored for future use. With 13 programme positions, repeat jobs can be recalled quickly, helping reduce setup time and waste between different booklet formats. Professional Booklet Finishing The DBM-120 automatically stitches and folds each set to produce a consistent, securely finished booklet. The connected DBM-120T Trimmer automatically trims the fore edge of the booklet as it exits the booklet maker, removing the uneven edge created during folding and providing a clean, professional finished product. System Includes Duplo DBM-120 Booklet Maker Duplo DBM-120T Fore-Edge Trimmer Purpose-built operator stand Serviced & Tested by Glendale This DBM-120 has been fully serviced, inspected and production tested by our engineers. The complete system has been checked and tested under production conditions to ensure correct operation before being offered for sale.

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 1950, turning diameter over cross slide: 225 mm, turning length: 425 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 7,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,729 mm, total length: 3,255 mm, total width: 2,612 mm, quill diameter: 80 mm, quill stroke: 100 mm, type of input current: three-phase, For sale is a SAEILO ACE 12+ CNC turning center, manufactured in 2017 and first commissioned in July 2018. It includes a BOSS 552 bar feeder with 32 tool positions, manufactured in 2018. The machine is based on the ACE Designers Jobber LM Elite and is equipped with a FANUC Series 0i-TF control. The machine number is 1950. The machine is currently connected and can be inspected while powered on. It is in used condition with typical signs of wear from industrial use. The scope of delivery includes an IEMCA Boss 552-HD heavy-duty bar feeder, type 32 LL, manufactured in 2018, serial number 021835GA03. The bar feeder weighs approximately 830 kg, operates on 400 V / 50 Hz, and requires 6 bar of compressed air. Technical data of the machine: max. machining diameter 320 mm, swing over bed 500 mm, swing over slide 225 mm, distance between centers 425 mm, X-axis travel 165 mm, Z-axis travel 400 mm, spindle speed up to 5,000 rpm, 8 tool stations, tool cross-section 25 x 25 mm, rapid traverse X/Z 30 m/min, and a machine weight of approximately 4,000 kg. Electrical data: 380/400 V AC, 3-phase, 50 Hz, 24 V DC control voltage, 40 A fuse, 23/22 A rated current, and 15 kVA connection power. Important note: The measuring arm is currently not functioning. Other functions can be tested during an on-site inspection while the machine is powered on. The machine is located in Bocholt. Inspection and pickup are possible by arrangement. Transport and loading are the responsibility of the buyer. Gbsdpfx Aszl D Rujl Seu

Condition: used, Year of construction: 2000, functionality: unexamined, machine/vehicle number: G08020001712, Equipment: documentation/manual, Portable 3D coordinate measuring arm, FARO Gold, model G08, measuring volume 2.4 m (8 ft). Serial no. G08020001712, Rev. 12, year of manufacture 2000, certification 2012. Certified single-point accuracy (2 Sigma) 0.051 mm. Connection: 100-240 V, 50/60 Hz. Gjdpfx Aljz A Uqde Sobu Supplied in a transport case with foam insert, connection cable, probe tip, and documentation. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: used, Year of construction: 2006, operating hours: 37,695 h, functionality: fully functional, Equipment: documentation/manual, CNC lathe – Gildemeister CTX 410 with C-axis (used) Machine data Model: Gildemeister CTX 410 Year of manufacture: 2006 Control system: Siemens 840D (ShopTurn) Gbedpoz Nxcxjfx Al Sju Spindle hours: approx. 37,695 h Max. spindle speed: 5,000 rpm Max. turning length: 635 mm Spindle bore: 65 mm Tool turret: 12-station Tool holder: VDI30 Condition: used, functional Accessories Chip conveyor with coolant pump Bar loader included, but never connected IFM oil mist extraction system Röhm 3-jaw chuck Maintenance / Service The machine was recently realigned by a DMG technician (turret and spindle). The following components were replaced: Door switch Foot pedal for chuck Various relays New NPU New PLC Location 24222 Schwentinetal Transport / Collection Collection only Transport and loading are to be arranged by the buyer Terms of sale Sale exclusively to businesses / entrepreneurs No sale to consumers Sale is made with exclusion of any warranty for defects No guarantee or warranty of suitability Inspection and functional testing possible by appointment Price net. VAT can be shown separately.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, cutting height (max.): 155 mm, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, cutting length (max.): 3,450 mm, The machine has been completely overhauled by the manufacturer! TECHNICAL DETAILS Sawing unit Cutting height: max. 155 mm Gbedpfxez Iryge Al Sou Cutting height at 45°: max. 105 mm Saw blade diameter: max. 450 mm Saw blade arbor: 30 mm Swivel range: 0–46° Motor power: 5.5 kW Speed: 3,000 / 4,000 / 5,000 / 6,000 rpm Cutting range Cutting width: 1,250 mm Cutting length: 3,450 mm Sliding table length: 3,200 mm Cross slide and stops Digital folding stops: 3 Cross slide extendable up to: 3,500 mm Positioning accuracy parallel stop: 0.1 mm EQUIPMENT Scoring unit Auto-EPS with electromechanical side and height adjustment Electrically controlled parallel stop Electrically controlled axis adjustment Cross slide with 3 digital folding stops Machine completely overhauled by the manufacturer Sliding table completely re-adjusted Linear guide rail converted to a new digital system with 3 stops Stainless steel scale for angle adjustment renewed Cross slide checked 90° locking of the fence completely renewed Electrical system checked Machine re-adjusted, checked, and lubricated German-language documentation

Condition: used, Year of construction: 2013, gearing type: other, first registration: 01/2013, color: orange, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Gbsdpfx Ajz Iyx Dol Seu Body: Clearance width approximately 2500 mm. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale and errors!

Condition: used, Year of construction: 2010, fuel type: gas, Due to the large number of unreliable emails, we will not be responding to all emails. Gjdpfx Aoz Rrwrol Ssbu WhatsApp: 1 x Linde H35T, 2007 = 5,000 net 1 x Linde H35T, 2010 = 5,500 net Forklifts sold as is, without refurbishment or inspection. "ERRORS, TYPOS, AND PRIOR SALE EXCLUDED"

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, total width: 580 mm, total height: 280 mm, total length: 5,000 mm, conveying length: 5,000 mm, construction width: 580 mm, power: 0.19 kW (0.26 HP), axle spacing: 60 mm, TAF article number: 1000003831 Overall dimensions: approx. 5,000 x 580 x 280 mm (LxWxH) Width incl. side: 580 mm Gbjdpfxstizbte Al Seu Side panel height: 100 mm Width incl. drive: 580 mm Conveyor length: 5,000 mm Conveyor width: 500 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 60 mm Roller diameter: 50 mm Drive type: Flat belt Motor: Gear motor Motor data: SEW, 0.25 kw, 50 Hz, 220-240 Volt Conveying speed: max. 0.19 m/s, constant Special features: CEE plug Condition: Used / fully functional Function test: OK

Condition: good (used), measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 4,058 mm, workpiece weight (max.): 100 kg, total height: 2,185 mm, total width: 1,082 mm, total length: 1,054 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 515 kg, input voltage: 230 V, travel speed (max.): 25,800 mm/min, table load: 100 kg, compressed air connection: 5 bar, ambient temperature (max.): 26 °C, ambient temperature (min.): 16 °C, Equipment: type plate available, Mitutoyo Euro-C Apex544 CNC 3D CMM. P.S. For Dutch buyers looking for a CMM: Keep in mind that a measuring machine must always be professionally packaged, transported, and installed! These costs are NEVER mentioned by the sellers on this website. These costs usually range from €5,000 to even above €10,000! Please take this into account. Also, the operation (and especially the accuracy) is not guaranteed. An excellent 3D CNC CMM at a very attractive price. Three-dimensional measurement with accuracy within three micrometers! A fine-looking Mitutoyo Euro-C Apex544 3D Coordinate Measuring Machine. In very good condition. Fully meets specifications. Measuring range: X-axis 505 mm Y-axis 405 mm Z-axis 405 mm Specification ISO 10360-2 MPEE = [2.9 + 4.0L/1000] µm (at a temperature of 16–26°C) Resolution 0.0001 mm. CNC speed 430 mm/sec. Maximum acceleration 0.17 g Workpiece load capacity up to 100 kg Height 219 cm Width 109 cm Length 106 cm Air-bearing axes (5 bar supply) Operates on 230V power to the controller (the CMM itself runs on low voltage). Euro-C Apex544 (PH1 + TP20). Standard joystick. Desktop PC with Windows 11 Pro (English). 24-inch monitor. Mouse & keyboard. MCOSMOS v3.0 Upgrades available to: PH10T/M + PHC10-2. TP200 + PI200-2 SCR200 + 6 STD modules. MCOSMOS version of choice (subject to stock). Dual joystick. (On-site training within the Benelux region). Gbsdpfx Aozz Rc Ael Ssu Sales prices exclude: transport, installation, calibration, and measurement certificate. Can be viewed in operation/demonstrated in the Netherlands by appointment. Within the Netherlands, transport and installation will be provided free of charge (calibration is not included, though it is available as an option).

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Gbedsxukh Eopfx Al Seu Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: used, mileage: 46,275 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x4, wheelbase: 3,090 mm, first registration: 06/2021, fuel tank capacity: 80 l, emission class: euro6, color: white, number of seats: 5, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, power assisted steering, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Automatic headlights - Heated exterior mirrors - Passenger airbag - Hill descent control - Bluetooth - Differential lock - Electric rear windows - Electric front windows - Electrically adjustable exterior mirrors - Electronic brake force distribution - Driver airbag - Remote central locking - Hill-hold control - Knee airbags - Front head airbags - Front center armrest - Multifunctional steering wheel - Multimedia compatible - Emergency brake assist - Radio/CD player Gbedpfez Aa Epsx Al Ssu - Front side airbags - Front seat heating - Immobilizer = Additional Information = General Information Number of doors: 4 Model range: June 2019 - April 2024 Cab: double Technical Information Torque: 400 Nm Number of cylinders: 4 Engine displacement: 2,393 cc Transmission: 6 gears, manual gearbox Acceleration (0–100): 13.2 s Top speed: 170 km/h Weights Unladen weight: 2,080 kg Payload: 1,130 kg GVWR: 3,210 kg Interior Interior: black Consumption Average fuel consumption: 9.2 l/100km Condition Number of keys: 1 (1 remote control) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, Year of construction: 2013, machine/vehicle number: 320.002.13, functionality: fully functional, operating hours: 3,600 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,150 mm, workpiece height (max.): 100 mm, number of axes: 4, number of slots in tool magazine: 18, controller manufacturer: Felder, year of last overhaul: 2025, Equipment: CE marking, CNC machining center Profit H10 22.43 Year of manufacture: 2013 Operating hours: approx. 3600 h System: Matrix table made of phenolic resin Slotted table with two rows of stops Automatic central lubrication HARDWARE: Control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Extraction: Central extraction via combined connections (D=250 mm) Software: Woodflash German (H20/H08/H10/H50) Travel range of the axes H10 22.43 X = 5230 mm Y = 2560 mm Z = 280 mm Working area: X = 4300 mm Y = 2160 mm Z = 105 mm Axis positioning speed: X = 100 m/min Y = 100 m/min Z = 30 m/min The machine will be in operation until calendar week 38 of 2026, after which it will be dismantled. Gbedezwt Ndopfx Al Sju In addition, 2 swivel heads for 5-axis machining can be purchased. These are not included in the quoted price and will be priced separately. The price applies ex works, including loading. Transport can be arranged and ordered separately. Assembly and installation assistance can also be offered as an option.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: LN6700, mileage: 102,250 km, power: 85 kW (115.57 HP), first registration: 02/2008, fuel type: diesel, empty load weight: 2,460 kg, maximum load weight: 1,030 kg, overall weight: 3,500 kg, axle configuration: 4x2, next inspection (TÜV): 01/2027, fuel: diesel, color: green, gearing type: mechanical, number of gears: 6, emission class: euro4, number of seats: 6, total length: 5,650 mm, total width: 2,100 mm, total height: 2,180 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,450 kg, loading space length: 2,370 mm, loading space width: 2,000 mm, loading space height: 1,000 mm, number of previous owners: 1, Equipment: ABS, airbag, electronic stability program (ESP), hill-start assist, parking heater, power assisted steering, soot filter, Ford Transit 115T350 Three-sided tipper, first owner Formerly a municipal/official vehicle Double cab with 6 seats Low-emission Euro 4 Diesel particulate filter Green environmental badge 6-speed manual transmission Auxiliary heater Eberspächer (not tested) Godpfx Alszkmrle Sjbu Trailer coupling Ringfeder (quick-change system) 2,800 kg braked trailer load Small toolbox Raised sideboards and front panel Tie-down points on the loading area Yellow rotating beacon Twin-tired rear axle Electric differential lock (EDS) Airbag for driver and passenger Power steering Central locking Electric windows Electric exterior mirrors Dimensions of loading area in mm: L: 2370 W: 2000 H: 1000 Payload 1040 kg Unladen weight 2460 kg Permissible total weight 3500 kg Engine 2.4 L - 85 kW TDCi catalytic converter Wheelbase 3504 mm We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes and prior sale are subject to change. We are available for you from Monday to Friday from 9:00 a.m. to 5:00 p.m., Saturday by appointment only, and outside of these opening hours, telephone appointments are possible. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters are given priority, and this applies to our entire vehicle stock. The information given above is not binding, errors/changes and prior sale are subject to change!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: LN6700, mileage: 102,250 km, power: 85 kW (115.57 HP), first registration: 02/2008, fuel type: diesel, empty load weight: 2,460 kg, maximum load weight: 1,030 kg, overall weight: 3,500 kg, axle configuration: 4x2, next inspection (TÜV): 01/2027, fuel: diesel, color: green, gearing type: mechanical, number of gears: 6, emission class: euro4, number of seats: 6, total length: 5,650 mm, total width: 2,100 mm, total height: 2,180 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,450 kg, loading space length: 2,370 mm, loading space width: 2,000 mm, loading space height: 1,000 mm, number of previous owners: 1, Equipment: ABS, airbag, electronic stability program (ESP), hill-start assist, parking heater, power assisted steering, soot filter, Ford Transit 115T350 Three-sided tipper, first owner Formerly a municipal/government vehicle Double cab with 6 seats Low-emission Euro 4 Diesel particulate filter Green environmental badge 6-speed manual transmission Auxiliary heater Eberspächer (not tested) Trailer coupling Ringfeder (quick-change system) 2,800 kg braked trailer load capacity Gjdpfxjzkmrrs Al Ssbu Small toolbox Raised sideboards and front panel Tie-down points on the loading area Yellow rotating beacon Twin-tired rear axle Electronic differential lock (EDS) Airbag for driver and passenger Power steering Central locking Electric windows Electric exterior mirrors Dimensions of loading area in mm: L: 2370, W: 2000, H: 1000 Payload 1040 kg Unladen weight 2460 kg Permissible total weight 3500 kg Engine 2.4 L - 85 kW TDCi catalytic converter Wheelbase 3504 mm We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 AM to 5:00 PM. On Saturdays, by appointment only. Outside these hours, telephone appointments are possible. We will gladly accept your current used equipment/vehicle as a trade-in. Sales to commercial customers and exporters are given priority; this applies to our entire vehicle stock. The aforementioned information is non-binding. Errors/changes and prior sale reserved!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: LN6700, mileage: 102,250 km, power: 85 kW (115.57 HP), first registration: 02/2008, fuel type: diesel, empty load weight: 2,460 kg, maximum load weight: 1,030 kg, overall weight: 3,500 kg, axle configuration: 4x2, next inspection (TÜV): 01/2027, fuel: diesel, color: green, gearing type: mechanical, number of gears: 6, emission class: euro4, number of seats: 6, total length: 5,650 mm, total width: 2,100 mm, total height: 2,180 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,450 kg, loading space length: 2,370 mm, loading space width: 2,000 mm, loading space height: 1,000 mm, number of previous owners: 1, Equipment: ABS, airbag, electronic stability program (ESP), hill-start assist, parking heater, power assisted steering, soot filter, Ford Transit 115T350 Three-sided tipper, first owner Former municipal/government vehicle Double cab with 6 seats Low-emission Euro 4 Diesel particulate filter Green environmental badge 6-speed manual transmission Auxiliary heater Eberspächer (not tested) Trailer coupling Ringfeder (quick-release system) 2,800 kg braked trailer load Small toolbox Raised sideboards and front panel Tie-down points on the loading area Yellow rotating beacon Twin-tire rear axle Electronic differential lock (EDS) Airbag for driver and passenger Power steering Central locking Electric windows Electric exterior mirrors Dimensions of the loading area in mm: L: 2370 W: 2000 H: 1000 Payload 1040 kg Unladen weight 2460 kg Permissible total weight 3500 kg Engine 2.4 L - 85 kW TDCi CAT Wheelbase 3504 mm We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes and prior sale are subject to change. Godpfx Alezkmrxj Sobu We are available continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by appointment. Outside these opening hours, telephone appointments are possible. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters are given priority, and this applies to our entire vehicle stock. The above information is non-binding; errors/changes and prior sale are subject to change!