Used Cormak Ps-180 for sale (8,537)

Condition: new, machine/vehicle number: c1946328bb4efe26fccb128ee, empty load weight: 3 kg, maximum load weight: 14 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 385 / 55 r 22,5, Further information Chassis Turntable Disposal Fine-grained steel welded construction 2 longitudinal beams with cross beams, upper side of the longitudinal beams designed as container roller tracks in wear-resistant design, loadable from the rear, with ramp. For roll-off containers with 6.5/ 7.0 m. Container locking: - 2 pairs of locking hooks embedded in the floor - pneumatic actuation The container locking is a 2-point design, acting from the inside, and locking of the roll-off containers with inner web is not possible (for transporting roll-off containers with lower frame in accordance with DIN 30722) Turntable with strong ball bearing slewing ring Wheel chocks with holder Aluminum side bumpers Steel underride guard Half-shell mudguards Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Wheels and tires 385 / 55 R 22,5 at the manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Spring-loaded parking brake Immobilizer: the spring-loaded parking brake is activated when the container lock is open Vehicle stability system 2 non-interchangeable coupling heads at the front, with connecting lines to the motor vehicle, EBS, electronic braking system with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear Gsdpfxsi Ri Nmj Anljuc 2 x 7-pin interchangeable plugs at the front, with connecting cable, Country of registration / plates Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Drawbar KTL black Attention: Archive pictures!

Condition: new, machine/vehicle number: b6e633155abf971a017e4b53b, empty load weight: 3 kg, maximum load weight: 14 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 385 / 55 r 22,5, Further information Chassis Turntable Disposal Fine-grained steel welded construction Carriage: Container is placed on the carriage from the rear and pushed forwards, container stop at the front adjustable for 6.0 / 6.5 and 7.0 m roll-off containers with outer roller Container locking mechanism: - 2 pairs of locking hooks embedded in the floor - Pneumatic actuationThe container locking mechanism is a 2-point design that operates from the inside and locking of roll-off containers with an inner web is not possible Turntable with powerful ball bearing slewing ring Wheel chocks with holder Aluminum side bumpers Steel underride guard Half-shell mudguards Rear impact protection, vertical left and right, with delta rubber on the underride guard holder, Trailer drawbar Turntable Guedpji Ri Nqsfx Anljc Drawbar with tested 40 mm drawbar eye Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension with lift & lower valve Wheels and tires 385 / 55 R 22,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Spring-applied parking brake Immobilizer: the spring-loaded parking brake is activated when the container lock is open Vehicle stability system 2 non-interchangeable coupling heads at the front, with connecting lines to the motor vehicle, EBS, electronic braking system with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 1 additional LED work light(s) at the rear, switched via reversing light 2 x 7-pin interchangeable plugs at the front, with connecting cable, Approval / plates Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Drawbar KTL black Attention: Archive pictures!

Year of construction: 2017, condition: used, Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, screw conveyor -Manufacturer: olocco, rotary valve type VPS 180 -Inlet opening: Ø 120 mm -Outlet: 150 x 115mm Gedpoh Ay R Eefx Anlsuc -Shaft: Ø 25 x 60 mm -Dimensions: 320/250/H245 mm -Weight: 27 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Festo, standard cylinder type DSNU-32-180-PPS-A with proximity switch -Stroke path: 180 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M 10 x 1.25 Gsdpfx Anoqn Apuoljuc -Dimension: 330/38/H65 mm -Weight: 0.6 kg

Condition: used, maximum load weight: 13,560 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2012, next inspection (TÜV): 02/2026, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 48 m³, * 18t Sonntag body with reinforced air suspension assembly * Gigant axles / air suspension / drum brakes / rear supports / height and length-adjustable drawbar / sliding tarp / portal doors / 50mm towing eye with air coil and Duomatic coupling Guedpfx Anox Nb H Djljc --As inspected or offered, without additional services or accessories. Our offer does not include a new technical inspection (TÜV) by default. Should you require a new TÜV inspection, we will gladly provide an offer from our partner workshops! The vehicle may be covered with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. We will assist you with export procedures, preparation of export documents, obtaining license plates, supplier declarations, etc.! The information provided in advertisements, online listings, price tags, and images constitutes non-binding descriptions and does not represent warranted characteristics. The seller assumes no liability or guarantee for typographical or data transmission errors. Equipment details listed should be verified separately if necessary. We expressly reserve the right to prior sale, as we also list this item on other platforms. Accessory information is provided without guarantee. Subject to changes, prior sale or errors. We strongly recommend and encourage inspection and testing to ensure the buyer has an accurate understanding of the condition and suitability. Vehicle and tarp may be labeled; images may be edited. We sell exclusively under our general terms and conditions, excluding any warranty. Inspections and testing are possible and explicitly encouraged at any time by appointment.

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Gsdpfezb Dr Ssx Anljuc Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: used, mileage: 340,158 km, power: 324 kW (440.52 HP), first registration: 02/2015, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x2, wheelbase: 3,900 mm, fuel: diesel, color: red, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: air conditioning, crane, electric window regulation, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Drivetrain Drive: Wheel Make of engine: DAF Axle configuration Axle 1: Tyre size: 385/65R22.5; Suspension: leaf suspension Gusdpfx Asy N Uakonljc Axle 2: Tyre size: 385/65R22,5; Double wheels; Steering; Suspension: air suspension Axle 3: Tyre size: 295/80R22,5; Double wheels; Suspension: air suspension Axle 4: Tyre size: 295/80R22,5; Double wheels; Steering; Suspension: air suspension Weights Empty weight: 17.425 kg Carrying capacity: 18.075 kg GVW: 35.500 kg Functional Mast: telescopic (3 parts) Make of bodywork: PALFINGER EPSILON Q180 Z95 TR = Additional options and accessories = - PTO - Tipper hydraulics

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature test chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (time-based): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height: 920 mm Width: 1100 mm Depth: 1330 mm External dimensions: Height: approx. 2050 mm Width: approx. 1300 mm Depth: approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert grid: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Heated door seal Water-cooled refrigeration unit CEE connector CE marking Weight: approx. 1500 kg Condition Used unit from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Gusdpfx Aoza Dv Ionljc Scope of supply: see pictures Inspection possible by arrangement. Loading can be organized. Subject to changes and errors in the technical data.

Condition: used, functionality: fully functional, This listing is for a used “Xerox Versant 180 Press” color production system Items included: 1 x Xerox Versant 180 Press with the following features: Includes Fiery E300-5 Includes Paper Deck A-CF01/A-GW03 Godpfx Ansza A Eusleuc Includes Booklet Finisher A-FN13 Not the right configuration? It’s no problem to configure the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 729,330 pages Color: Approx. 505,865 pages Black: Approx. 223,465 pages Condition: This is a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, you are of course welcome to contact us directly.

Condition: used, mileage: 121,265 km, power: 130 kW (176.75 HP), first registration: 05/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,118 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1211.9016068 Gusdpjxriccsfx Anlec EQUIPMENT * Tow bar preparation * Rear step * Electrically adjustable and heated exterior mirrors * Electric windows * Central locking with remote control * Reversing camera * High side paneling in cargo area * Lashing rails on ceiling and side wall * LED interior lighting * Rear wing doors with 270° opening * SOS emergency call function (eCall) * Reading lights left/right * Start/stop system can be deactivated * Air conditioning * USB port * DAB+ radio with touchscreen * Driver's seat with armrest * Dual passenger seat ... and much more. The vehicle is unprepared (sold as is)! Nationwide delivery available for an additional charge. Errors and prior sale excepted. Trade-in of your vehicle welcome. Financing/leasing possible also without down payment! Do you have any questions? We are happy to advise you!

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump Godpfegx Amrex Anlsuc -Manufacturer: Shibaura, Coolant pump from Matsuura MC 710V milling machine -Type: OPSI-180W -Power: 180 W -Flow rate: 39/53 l/min -Bolt circle: Ø 160 x 10 mm -Dimensions: 200/270/H370 mm -Weight: 13.3 kg

Condition: used, empty load weight: 5,300 kg, maximum load weight: 12,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 52 m³, suspension: air, tire size: 235/75R17,5 ---/141J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141J, rear tire size: 235/75R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Gujdpfx Aszbq Rujnlec

Condition: used, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2019, loading space length: 7,200 mm, suspension: air, tire size: 445/45 R19,5 160J, color: other, gearing type: other, front tire size: 445/45 R19,5 160J, rear tire size: 445/45 R19,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gedpfxezbq Rze Anleuc

Condition: good (used), Year of construction: 1976, Centre lathe ZERBST - DPS 1800 MACH-ID 581 Make: ZERBST Type: DPS 1800 Year: 1976 Swing over bed Ø 1600 mm Guedpfx Anewvir Isloc Swing over cross slide Ø 1250 mm Swing in the gap Ø 2100 mm Bed width 1400 mm Power 35 kW Speeds / ranges 180 Rpm

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Infeed width: 900mm Guedpfjzcby Njx Anlsc Infeed height: 300mm Shaft width: 1030mm Shaft diameter: 700mm Knife length: 1030mm Number of knives: 3 pcs Screen dimensions: 70x70mm Bottom: 2 toothed feed rollers Bottom roller motor: 7.5kW Top: 2 toothed feed rollers Top roller motor: 7.5kW Belt conveyor Redler chain conveyor 5600mm + 10600mm 2.2kW Infeed belt width: 800mm Main motor: 90kW Reverse operation Total machine dimensions (L/W/H): 3300x3100x1700mm Shredder base dimensions: 3300x2080x1940mm Feeder / redler dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm Base dimensions for infeed belt: 5100x1300x2520mm Total weight approx.: 16000kg ADVANTAGES – German-made – Redler chain conveyor equipped with scrapers – Reverse operation – DTR technical documentation – Used shredder in very good condition Net price: 219,900 PLN Net price: EUR 52,350 (at EUR 4.2 exchange rate) (Prices may vary with significant fluctuations)

Condition: used, mileage: 74,955 km, power: 132 kW (179.47 HP), first registration: 06/2024, fuel type: diesel, empty load weight: 2,165 kg, maximum load weight: 1,260 kg, overall weight: 3,500 kg, tire size: 215/75R16C, axle configuration: 2 axles, wheelbase: 4,035 mm, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, cruise control, onboard computer, sliding door, truck registration, FIAT Ducato MAXI Panel Van L4H2 3500 180 MT | Air conditioning, cruise control, lane keep assist, traffic sign recognition | 3-seater bench | Rear-view camera, rear parking sensors | Navigation system | Floor and side paneling | 3 driving modes: Eco/Normal/Power | Wooden lining in cargo area | Subject to error, input mistakes, and prior sale. Guedpfx Anoya Nctoloc

Condition: good (used), Nagel Citoborma 180 Paper Drill with Pedestal The machine is in 100% working order. Very good condition. Solid construction – weighs approximately 100 kg. This is one of the newest Citoborma drill models. 230V power supply. One drilling head. Drill diameter: 2-20 mm. Stack height: 60 mm. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. In addition, the drill has an automatic table lock that releases after each cycle. Gjdpfszdawvox Anleuc The set includes drill bits, tools, a new cutting stick, and instructions.

Condition: good (used), Nagel Citoborma 180 Paper Drill This machine is 100% functional. This is the latest model. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Gedpfxjzdav Ej Anlsuc Very good condition. Solid construction – weight 65 kg. 230V power supply One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: used, mileage: 316,939 km, power: 132 kW (179.47 HP), first registration: 08/2010, overall weight: 8,600 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, parking heater, Body: - Küpper Weisser spreader - Model: STASF VES, year 2010 - ThermoMAT - Suitable for oil spill control - Storage boxes Equipment: - Cab: C (Compact) - Driver and passenger comfort seats, air-suspended - Automatic climate control - Additional air heater Eberspächer Airtronic D2 - Mechanical sunroof - Flame start system - Fuel tank: 200 L - 6-speed manual transmission Technology: - Rear-view camera - On-board computer MAN-Tronic - Electrically adjustable and heated exterior mirrors - Electric windows - ETA circuit breaker - Beacon lights Safety/Environment: - Rear axle differential lock - Engine brake - Electronic braking system MAN-Brakematic - Rear axle stabilizer - EURO 5 engine Miscellaneous: - German first delivery - 1 previous owner - Engine 4.6 L – 132 kW Diesel - Registration: previously self-propelled working machine 'traffic safety vehicle' - Payload 2,785 kg according to registration certificate - Perm. total weight 8.60 t Since 1972, your reliable partner for all automotive and commercial vehicle needs in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always keeps approx. 200 vehicles in stock, including transporters, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide you with an individual offer! Trade-in of your commercial vehicle/construction equipment is welcome. If a new TÜV inspection is desired, we will gladly offer you this service through our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your 'new' commercial vehicle can be arranged nationwide by our external partners at an additional cost. Gujdpfxowmx Aqe Anloc All information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical errors and data transmission mistakes. Listed equipment features may need to be verified separately. Subject to errors and prior sale.

Condition: new, mileage: 50 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, emission class: euro6, total length: 7,400 mm, total width: 2,400 mm, total height: 2,200 mm, loading space length: 4,800 mm, loading space width: 2,100 mm, Year of construction: 2026, Equipment: ABS, central locking, electronic stability program (ESP), The new Citroën Jumper – the reliable partner for your daily work. With its modern design, generous cargo space, and high functionality, it supports you in every challenge. Whether for trades, transport, or service operations – the Jumper impresses with its comfort, efficiency, and willingness to support your company day after day. Standard equipment: * Central locking with remote control * Electrically adjustable exterior mirrors * Electric windows, front * Front armrests * Shift paddles on the steering wheel * Air conditioning * Radio * DAB receiver * Hands-free system * Bluetooth * Touchscreen * ABS * ESP * Stability control * ASC (traction control) * ASR (traction control system) * Power steering * Light sensor * Emergency braking assistant (F.A.) * Lane departure warning system * Blind spot assist * Traffic sign recognition * Fatigue warning system * Cruise control * Speed limiter * Electric immobilizer Including additional options: * Artense-Gray (metallic) * Fabric upholstery Crepe Black + backrest pattern Gusdpjy U Stxjfx Anloc * Techno Visibility Plus package J6XK * 10" audio-navigation system with touchscreen + DAB + Apple CarPlay & Android * Auto+Double * USB charging port + Connected Services ZJB5 * Automatic climate control RE07 * Visibility Plus package J6MV * All-season tires MI32 * Digital tachograph HC09 * Driver's seat with suspension (sprung seat) RH16 * Extended wiring harness, rear KY06 * Reinforced suspension (double leaf spring suspension, rear) SE08 Superstructure: * Tow truck superstructure with ramp, roadside assistance vehicle * Storage box "Tranutec" * LED work light * Trailer coupling 3.0T * Winch "Pundmann" * Auxiliary air suspension on the rear axle * Warning light bar on the roof * TÜV §13 StvZo (German Road Traffic Licensing Regulations) Tranutec – The commercial vehicle expert! We offer you 15 years of experience with commercial vehicles! In addition to top prices, we offer you tailor-made solutions for your needs. For example, as additional factory-installed equipment from Tranutec: * Leaf guard * Side panel extensions * Tarpaulin spreader * Warning light bar * Trailer coupling (short version for tipper trucks, prevents damage to the side panels) * Storage box attachments, etc. * Municipal conversion Contact us! We would be happy to make you an offer according to your requirements. ---- WE ARE CITROËN – CONTRACT PARTNER and superstructure manufacturer Final price including delivery costs 2-year manufacturer's warranty from initial registration, without mileage limitation. We will be happy to inform you about further optional equipment and special solutions as well as about financing and leasing options. Images may show a model example and are not binding. Changes, errors and prior sale are subject to change! All information is non-binding. Although controls are in place, a deviation of the vehicle (e.g. with regard to technical data, equipment, material & external appearance) from the description provided above cannot be ruled out, we would like to point out that the subject of a contract is exclusively the motor vehicle in its actual condition.

Condition: new, mileage: 50 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, total length: 7,400 mm, total width: 2,400 mm, total height: 2,200 mm, loading space length: 4,800 mm, loading space width: 2,100 mm, Equipment: ABS, central locking, electronic stability program (ESP), The new Jumper. The Citroën Jumper – a reliable partner for your business. Unbeatable value for money. Standard equipment includes: Central locking with remote control, electrically adjustable exterior mirrors, electric front windows, front armrests, steering wheel paddle shifters, air conditioning, radio, DAB receiver, hands-free system, Bluetooth, touchscreen, ABS, ESP, stability control, ASC (traction control), ASR (anti-slip regulation), power steering, light sensor, emergency brake assist (F.A.), lane departure warning system, blind spot assist, traffic sign recognition, driver fatigue warning system, cruise control, speed limiter, and electronic immobilizer. Including additional options: * Ice White P0PR * Fabric upholstery in Crepe Black + backrest pattern * Techno Visibility Plus Package J6XK * 10" Audio-NAV System with touchscreen + DAB + Apple CarPlay & Android Auto + dual USB charging port + Connected Services ZJB5 * Automatic climate control RE07 * Visibility Plus Package J6MV * All-weather tires MI32 * Digital tachograph HC09 * Driver's suspension seat (comfort seat) RH16 * Extended rear wiring harness KY06 * Reinforced suspension (rear twin-leaf springs) SE08 Body: * Recovery vehicle body with loading ramps * “Tranutec” storage box * LED work lights * 3.0T trailer hitch * “Pundmann” winch * Additional air suspension on rear axle * Painted side panels * TÜV §13 StvZo certification —— Tranutec – The Commercial Vehicle Specialist! We offer 15 years of experience with commercial vehicles. Along with top prices, we provide tailored solutions to fit your requirements. For example, as optional ex-works Tranutec equipment: * Leaf catcher grille * Raised side panels * Tarpaulin with hoops * Warning light bar * Trailer hitch (short version for three-way tipper, prevents side panel damage) * Additional storage boxes, etc. * Municipal conversion Contact us! We’ll be happy to provide you with an offer tailored to your needs. —— WE ARE A CITROËN AUTHORIZED DEALER AND BODY MANUFACTURER Final price incl. delivery charges. 2-year manufacturer’s warranty from first registration with no mileage restriction. We’re happy to advise you on further optional equipment, special solutions, and attractive financing or leasing offers. Images may show sample models and are not binding. Subject to change, errors & prior sale! All information provided without obligation. Despite continual checks, deviations in the vehicle (e.g., regarding technical data, equipment, materials, or external appearance) from the above description cannot be excluded. Please note that only the actual condition of the vehicle at the time of conclusion of the contract is legally binding. Gedpfx Ajymh Eajnlsuc

Condition: excellent (used), CATALOG NUMBER 7854 Technical data: - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding Gjdpfsy Rr T Rex Anlsuc – unit can operate vertically and horizontally – unpainted – used sander, very good condition Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2026, Industrial metal lathe CORMAK TORNADO 460x2000 Main advantages: - Versatile applications : The lathe is ideal for various tasks, such as turning internal and external surfaces, cones, metric, inch, modular and DP threading, polishing, drilling and broaching. - Stable construction : The 300 mm wide cast iron bed has been hardened and precisely ground, which ensures high vibration reduction and stable working conditions even under heavy loads. - Digital precision : The device is equipped with a digital readout on two axes (longitudinal, transverse), which visualizes the exact values ​​of shifts on the screen thanks to optical measuring lines. - High-quality spindle : Reinforced bearing system in the spindle and a large passage of 82 mm guarantee optimal efficiency during work. The set also includes a 3-jaw lathe chuck with a diameter of 250 mm and a 4-jaw chuck with a diameter of 320 mm , a 5.5 kW motor. - Efficiency and productivity : The rapid longitudinal and transverse feed system on the joystick significantly shortens the machining time, and the hardened and ground gears in the spindle gear ensure durability and reliability for years. - Wide possibilities of threading : Thanks to the threading function (metric, inch, modular and DP), right and left, and the possibility of changing parameters without the need to replace gears, work becomes faster and more convenient. The range of supported threads includes, among others, metric (41) from 0.1 to 14 mm, inch (60) from 2 to 112 TPI, modular (34) from 0.1 to 7 MP and DP (50) from 4 to 112 DP - Precise counting of turns : The lathe is equipped with a threading clock, which allows for quick setting of the support in the original position after unscrewing the lead screw nut. - Ergonomics and ease of use : The intuitive control panel on the gear unit allows for quick adjustment of the spindle speed and automatic feed. - Machining of large elements : The replaceable bed bridge allows for turning large elements with a diameter of up to 690 mm and a length of 240 mm (with the bridge removed), which increases the range of the device's capabilities. Technical parameters: Turning diameter over bed ø460 mm Turning diameter over cross slide ø274 mm Turning diameter in recess diameter x width 690mm x 240mm Canine height 230mm Distance between fangs 2000mm Bed width 300mm Maximum knife cross-section 25x25mm Total travel of the cross slide 290mm Total upper slide travel 120mm Spindle bore diameter ø82 mm Spindle tip D1-8 Spindle socket (cone) ø90 (1:20) Number of spindle speeds 12 Gjdpov E Eiisfx Anlsuc Spindle speed range 25-2000 rpm Lead screw diameter and threads ø35mm x 6mm Inch threads Pitch Pitch 2-112 TPI (threads per inch) (60) Metric threads 0.1-14mm (41) teeth per inch tooth pitch dia. 4-112D.P. (50) Gear modules 0.1-7M.P. (34) Longitudinal feed 0.031-1.7mm/rev (42) Cross feed 0.014-0.784mm (42) Total travel of the tailstock bearing liner 120mm Tailstock bearing sleeve diameter ø60 mm Gear modules MT No. 4 Spindle drive motor 5.5kW Coolant pump motor 0.09kW Machine dimensions (LxWxH) 3220x1040x1340 mm Weight 2785 kg

Condition: new, Year of construction: 2026, Vertical Bandsaw - Industrial Machine Godpfxjvugtno Anlsuc A proven industrial machine! Successfully sold throughout Europe. A heavy-duty, professional, easy-to-use bandsaw with a durable construction. It allows for precise setting of work parameters, which directly impacts cutting efficiency. The quick tensioning lever is also used for quick removal of the blade. A precise cast iron machine table with a ground and polished surface. Adjustable table tilt from -10° to 45°. A window for easy reading of the blade tension. Technical Data: Wheel diameter [mm]: 680 Maximum cutting height [mm]: 430 Maximum cutting width [mm]: 700 Worktable dimensions (L x W) [mm]: 790 x 500 Worktable tilt [°]: -5 - 45 Blade width [mm]: 19 - 40 Blade length [mm]: 5020 Belt speed [m/s]: 18 Dimensions (L x W x H) [mm]: 1090 x 700 x 2430 Weight [kg]: 308 Motor power (S1/S6) [kW]: 4.0 / 5.6 Dust extraction ports [mm]: 2 x 100 Power supply: 3-phase, 400V Note: The price quoted is the net price. It does not include transportation costs.

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s Guedeuc Unqepfx Anlec FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg