Used Cronosstech Shsb 4R 30-400 for sale (38,063)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 55900 € 1056.51 € 3100 mm 9 mm 8 mm 7 mm 7 mm 5 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 5350 mm 1600 mm 1470 mm 6850 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Lhsdpfxoyb Sz Io Adtef Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), Pressure washer PTC Easypower L E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar - Feed rate: 38 or 30 l/min. - Motor: electric 63A, 3Ph-400V-50Hz 40PS/30kW, 1450 1-min or electric 63A, 3Ph-440V-60Hz 40PS/30kW, 1750 1-min - Dimensions: 1,370 x 850 x 1,030 mm - Empty weight: approx. 280 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High quality painted steel frame with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easy manoeuvrability - Industrial low voltage power supply (24V) and control unit with star-delta starter and 10 m. Power cable - Safety switch with thermomagnetic relay for motor protection - 4 pieces industrial wheels - Direct water intake through self-priming pump - Stainless steel relief valve with pressure relief system and EASY START system - 100 mesh water filter with easily replaceable cartridge - incl. 20 m high pressure hose with stainless steel quick couplings, spray gun, lance and flat jet nozzle 15 The following models are available: Easy Power L E 38/500 | 38l/min. 400bar Lhodpfefdzz Uox Adtsf Easy Power L E 30/500 | 30l/min 500bar

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 111500 € 2107.35 € 3100 mm 20 mm 20 mm 16 mm 16 mm 12 mm 350 mm Ledpfxjynm Ebo Adtohf 350 mm 260 mm 1,5-5 m/min 22 kW 6000 mm 2200 mm 1900 mm 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 60600 € 1145.34 € 3100 mm 10 mm 10 mm 8 mm 8 mm 6 mm 260 mm 260 mm 200 mm Lsdpfx Adsynm D Retshf 1,5 / 6 m/min 7.5 kW 5350 mm 1600 mm 1550 mm 7685 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, FILTER SYSTEM DE-30 230V / 400V Technical specification: Speed: 2850 Power supply: 230V or 400V / 50Hz (optional) Fan power: 3.0 kW Air flow: 3410 m3/h Inside size (L x H x W in mm): 720x1700x780 Weight in kg: 133 kg THE OFFER INCLUDES: Filter unit DE-30 230V / 400V (optional) CE declaration of conformity 24 months warranty for consumers Lhedjg N S Scepfx Adtjf 24 months warranty for entrepreneurs Professional service after warranty

Condition: used, Year of construction: 1980, functionality: fully functional, Kohler straightening machine 30-400 - built in 1980 Number of straightening rollers 9 Max. belt width 400 mm GSW decoiler AHM 1500 - built in 1999 Mounted together on a base frame Lsdpfxsv Hrlto Adtjhf Further data and pictures on request

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Lhodpfxewhvrrj Adtef Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Condition: new, For sale: New Siemens electric motor Motor unused, warehouse condition No signs of use, fully operational, ready for work Technical data: Manufacturer: Siemens Model: 1LE16032AA434AB4 Z Power: 30 kW Rotational speed: approx. 2955 rpm Voltage: 400/690 V Frequency: 50 Hz Protection class: IP55 Energy efficiency class: IE3 Ljdoyv Inuspfx Adtjhf Mechanical size: 200L Mounting type: B3 Robust industrial construction Ideal for industrial machinery, pumps, fans, and drive systems

Condition: good (used), Here we offer you a used shelf connectorf. Link 51 double shelving rows for sale. The shelf connectors are designed for a shelf distance of approx. 400 mm. Technical data to the shelf connector:Manufacturer: Link 51Type: Boltless XLIncluded in delivery:01x shelf connector used(consisting of 2 profiles)Usable for: Double shelving rowsMaterial colour: anthraciteOverall length: approx. 515 mmShelf spacing: approx. 400 mmU-profile: approx. 27 x 30 mmWeight/unit: approx. 1.321 kg /unit 04x hexagon screws, M8 x 4504x hexagon nut, M804x washers, M8 Lhjdpfed Tyizsx Adtjf

Condition: new, For sale: Original KSB RIO50-40D circulation pump, brand new, in its original packaging. The pump is intended for heating and cooling installations, as well as for applications in building technology and industry. ⸻ Technical Data • Manufacturer: KSB • Model / Type: RIO50-40D • ID Number: 29 132 136 • Power supply: 230V, 3~ 400 V / 50 Hz • Number of speeds: 3 • Power consumption (P1): 180 / 240 / 330 W • Nominal diameter: DN50 • Connection: flanged • Operating pressure: PN6 / PN10 Lodjyhhmgopfx Adtjhf • Max. medium temperature: 130°C • Protection class: IP44 • Insulation class: H • Weight: approx. 14.1 kg • Manufactured in: EU ⸻ Condition • New, unused • Original KSB packaging • Manufacturer's manual included • Condition exactly as shown in the pictures ⸻ Applications • Central heating systems • Heating and cooling circuits • Industrial and commercial facilities

Condition: new, Year of construction: 2026, power: 2.2 kW (2.99 HP), cutting height (max.): 300 mm, cutting width (max.): 450 mm, control type: NC control, actuation type: hydraulic, rotational speed (max.): 100 rpm, rotational speed (min.): 80 rpm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, CRONOSS 300 Fully Automatic Straight Cut Band Saw Machine The CRONOSS 300 is a fully automatic straight-cut band saw machine designed for serial production and repetitive cutting operations. By means of its automatic material feeding system and auto-stop control, it minimizes operator intervention and ensures seamless production continuity. It offers a compact and efficient solution for metalworking shops, steel service centers, and machinery manufacturers. Standard Features - Chip cleaning brush - Speed control device (Inverter) - Hydraulic vice - Hydro-mechanical blade tensioning system - 50 cm stop bar - Stop system - Automatic material feeding system - Blade breakage detection and automatic stop system - 1 x 120 cm + 1 x 60 cm roller table - LED lighting system Lhodpeyntz Aefx Adtof Technical Specifications – CRONOSS 300 Capacity 90° - Round: 300 mm - Square: 300 x 300 mm - Rectangle: 300 x 450 mm Motor & Technical Details - Main Motor: 2.2 kW - Hydraulic Motor: 0.37 kW - Coolant Motor: 0.09 kW - Band Saw Blade Size: 27 x 0.9 x 3660 mm - Material Feed Height: 775 mm - Vice Max. Opening: 450 mm - Vice Max. Closing: 0 mm - Table Width: 435 mm - Dimensions (H x W x L): 1320 x 1980 x 2862 mm - Weight: 850 kg Production & Supply The CRONOSS 300 is manufactured in Turkey. Different capacity and automation options are available upon request. For detailed technical information and price quotation, please contact us. Automatic Band Saw Machine Fully Automatic Band Saw Straight Cutting Band Saw Industrial Band Saw Metal Cutting Machine Steel Cutting Band Saw Hydraulic Band Saw Production Line Band Saw 300 mm Band Saw Automatic Steel Cutting Machine Workshop Cutting Machine

Condition: new, Year of construction: 2026, power: 2.2 kW (2.99 HP), cutting height (max.): 300 mm, cutting width (max.): 560 mm, control type: manual, pivoting range: 60 °, actuation type: hydraulic, rotational speed (max.): 100 rpm, rotational speed (min.): 80 rpm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, CRONOSS 300X560 YDG Pivoting Head Semi-Automatic Band Saw Machine The CRONOSS 300X560 YDG is a robust, pivot-type semi-automatic band saw machine engineered for medium-scale metal cutting operations. Featuring a rotary head that allows for precise and repeatable angled cuts between 0° and 60°. This machine offers a reliable cutting solution for steel fabrication workshops, machine manufacturers, and metal processing plants. Standard Features - Hydraulic vice - Variable speed control (inverter-driven) - Safety switches - Hydromechanical blade tensioning system - Variable miter cutting from 0° to 60° (Pivoting Head) - Angle gauge - Adjustable head descent system - 1 band saw blade included - 2 material support stands included - Country of origin: Turkey Model options available for diameters ranging from 220 mm to 3000 mm. Technical Specifications – 300 YDG Capacity at 90° - Round: 300 mm - Square: 300 x 300 mm - Rectangle: 300 x 560 mm Lhedoyntzpopfx Adtef Capacity at 60° - Round: 200 mm - Square: 180 x 180 mm - Rectangle: 180 x 245 mm Capacity at 45° - Round: 300 mm - Square: 235 x 235 mm - Rectangle: 235 x 360 mm Motor & Technical Details - Main motor: 2.2 kW - Hydraulic motor: 0.37 kW - Coolant motor: 0.09 kW - Blade dimensions: 34 x 1.1 x 4100 mm - Material feed height: 809 mm - Vice maximum opening: 600 mm - Vice minimum closing: 0 mm - Stand width: 615 mm - Dimensions (H x W x L): 1268 x 2035 x 2862 mm - Weight: 900 kg Production & Supply The CRONOSS 300X560 YDG is manufactured in Turkey. Alternative capacity and configuration options are available upon request. Contact us for detailed technical information and pricing. Band Saw Machine Semi Automatic Band Saw Pivot Type Band Saw Rotary Head Band Saw Metal Cutting Machine Steel Cutting Band Saw Industrial Band Saw Hydraulic Band Saw Angle Cutting Band Saw 300 mm Band Saw 300x560 Band Saw Workshop Band Saw Machine Structural Steel Cutting Machine

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 3,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, Standard Features ELGO P40T CNC control unit Robust, welded and monolithic frame structure providing maximum cutting precision NC-controlled, motorized 750 mm backgauge system Upper blade: double-edged; lower blade: four-edged, manufactured from high-alloy steel Mechanical hold-down system to prevent sheet slippage during cutting Easily adjustable blade clearance system Ball transfer front support table Front support arms with ruler Cutting line illumination system Finger protection system Foot pedal Rear protective cages Emergency stop button Optional Features 1,000 mm backgauge system Rear sheet support and sheet sliding system for easy positioning and transfer of sheets to the rear System for dropping cut pieces to the front Adjustable front angle gauge 0–180° Front support arms available in custom lengths upon request Manual 750 mm backgauge with front-adjustable handwheel system Rear safety light barrier Technical Specifications Machine Type: A04/3060 Lsdpfjyg Ic Eox Adtohf Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 3,060 mm Cutting Angle: 1.3° Cutting Speed: 41 strokes per minute Table Length (C): 800 mm Machine Dimensions (L × W × H): 3,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Weight: 4,000 kg

Condition: new, Year of construction: 2026, working width: 1,250 mm, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 5 mm, roller diameter: 35 mm, CLSM 1300×35 Sheet Straightening Machine The CLSM 1300×35 sheet straightening machine is a high-precision, industrial-grade system designed to eliminate deformations resulting from laser cutting, punching, and similar sheet metal processing operations. Thanks to its servo motor-controlled, multi-point adjustable straightening mechanism, it offers stable and repeatable straightening results for various sheet thicknesses and material types. The straightening rollers are manufactured from AISI 4140 material, induction-hardened to ensure long service life and reliable performance under intensive production conditions. Its high-rigidity steel frame, which has undergone stress relief treatment, minimizes vibrations to guarantee precision straightening capability. Equipped with European-origin drive and electrical components, the CLSM 1300×35 provides user-friendly controls for easy adjustment and safe operation. Standard Equipment - Suitable for straightening sheets of designated quality and thickness according to the sheet straightening diagram - Specifically designed to correct deformations caused by laser and punch operations - Steel welded frame ensures high static and dynamic rigidity - All steel structural components are stress-relieved - Maximum sheet width straightening capacity: 1250 mm - Straightening gap is electromecanically adjusted by servo motors and servo reducers at 4 separate points - SIEMENS servo motors and EU-origin electrical components Ledpfx Aeygnkpedtehf - 17 straightening rollers (AISI 4140 – induction hardened, ground) - Backlash-free and vibrationless motion enabled by MARIO FERRI (Italy) precision shafts and UNIMEC gear systems - 95 special support rollers under the straightening rollers prevent stress - Sheet thickness and correction parameters can be precisely set via the operator panel - Overload protection system Technical Specifications - Max. Working Width: 1250 mm - Min. Working Width: 70 mm - Material Thickness (Min.–Max.): 0.5 – 5.0 mm - Straightening Speed: 2.5 – 5.4 m/min (adjustable) - Number of Straightening Rollers: 17 (9 lower / 8 upper) - Roller Diameter: Ø35 mm (C4140 – induction hardened & ground) - Hardness: 60 HRC - Number of Support Rollers: 95 - Drive System: Gearmotor & inverter-controlled - Motor Power: 4 kW - Gap Adjustment System: Electromechanical (4 servo motors) - Adjustment Precision: 0.01 mm - Measuring System: Digital - Machine Dimensions (L × W × H): 3100 × 2000 × 2100 mm - Weight: 4200 kg Areas of Application - Sheet straightening after laser cutting - Sheet correction after punch cutting - Precision sheet metal processing lines - Industrial metalworking facilities - Mass-production sheet applications

Condition: new, Year of construction: 2025, stroke length: 300 mm, operating speed: 10 mm/s, reverse speed: 95 mm/s, controller manufacturer: ESA - DELEM - Cybelec, working width: 3,100 mm, bending force (max.): 100 t, distance between stands: 3,345 mm, control type: CNC control, number of axes: 4, actuation type: electric, BELT-DRIVEN SERVO CNC PRESS BRAKE Bending Capacity: 3100 mm / 100 Tons (E100 Model) STANDARD FEATURES - CNC-controlled belt-driven servo press brake - Y1 – Y2 – X – R axes CNC controlled (4 axes) - CNC controller (ESA S830 – 10” color touchscreen, 2D graphical display) - Automatic bending calculation and anti-collision functions - High-precision synchronized servo drive system - Belt-driven upper beam movement system, oil-free and requiring low maintenance Lsdpfx Ajx Nqukodtshf - Spring-supported upper beam structure supporting energy recuperation - O-type frame design for minimal deformation - 300 mm stroke - 410 mm throat depth - Servo motorized backgauge system (X + R axes) - Backgauge precision: ±0.03 mm - Backgauge travel distances: - X axis: 750 mm - R axis: 250 mm - Hardened ball screws and linear guides - Two 3-stage backgauge fingers - European type upper tool holder – quick release (Promecam type) - European type narrow lower table - Standard upper punch (H: 67 mm – 85° – R: 0.8 mm) - Standard lower die (60×60 mm – 4V: 16 / 22 / 35 / 50 mm – 85° – H: 60 mm) - High-precision optical linear scales - LED illuminated working area - Sliding type front support arms - Double foot pedals - Emergency stop buttons - Safety equipment conforming to CE standards OPTIONAL FEATURES - Additional backgauge axes (Z1 – Z2 – X5) - Backgauge travel extension to 1000 mm - Motorized crowning system - Hydraulic upper and lower tool clamping systems - Front safety laser system (AKAS or DSP type) - Rear safety light curtain - CNC-controlled sheet support arms - Laser bending line - Laser angle measurement system - Automatic angle measurement systems - Air-conditioned electrical cabinet cooling system - Additional backgauge fingers - Custom tool and table solutions TECHNICAL SPECIFICATIONS (E100 / 3100 MODEL) - Bending force: 100 tons - Bending length: 3100 mm - Distance between side frames: 3345 mm - Stroke: 300 mm - Throat depth: O-Type frame - Open height (daylight): 515 mm - Table height: 900 mm Speeds - Approach speed: 95 mm/s - Bending speed: 10 mm/s (in compliance with CE standard) - Return speed: 95 mm/s Backgauge - X axis travel: 750 mm - R axis travel: 250 mm - X axis speed: 400 mm/s - R axis speed: 100 mm/s - Z axis speed: 600 mm/s General - Main motor power: 2 × 5.5 kW - Machine weight: ~7,500 kg - Machine dimensions (L×W×H): approx. 4600 × 2000 × 2650 mm

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 3,100 mm, sheet thickness (max.): 15 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls driven by hydromotor and planetary gearbox * Hydraulically opening head for easy removal of bent parts Ledpfsw Sld Rjx Adtshf * Very easy operation with mobile control panel * Lower rolls positions easily read via two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting profile- and pipe-bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Rollers for profile bending * Infinitely adjustable hydraulic speed control * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending: 10/13 mm Bending: 13/15 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 5150 mm Width: 1500 mm Height: 1550 mm Weight: 9050 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 2,050 mm, sheet thickness (max.): 22 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic cylinders * Protected against overloading * All rolls are driven by hydromotor and planetary gearbox * Folded parts are easily removed thanks to the hydraulically opening head * Very easy to operate with movable control panel * Lower roll positions are easily read via two digital indicators * Welded steel body construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Bearing-supported conical bending system * Hydraulic balancing system ensures parallel movement of shafts * Extended shaft ends for mounting profile and pipe bending rolls OPTIONAL EQUIPMENT * Upper crane (hoist) for support in large diameter bending * Hydraulic side supports for assistance in large diameter bending * Ground and polished rolls for special applications Lodpfx Aow Slg Sodtohf * Rollers for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16/20 mm Bending: 20/22 mm Top & Bottom Roll Diameter: 300 mm Side Roll Diameter: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4100 mm Width: 1500 mm Height: 1550 mm Weight: 7400 kg

Condition: new, Year of construction: 2026, pressing force: 300 t, stroke length: 60 mm, table width: 400 mm, table length: 4,200 mm, stroke adjustment: 100 mm, warranty duration: 24 months, Equipment: safety light barrier, Our presses and feeding lines, designed for the door and window accessories industry and featuring both dual and single operation modes, guarantee maximum efficiency and reliable operation for many years. In the window accessories sector, where high-volume production is essential, our presses—combined with our extensive experience—ensure maximum customer satisfaction. - Pressing force up to 400 tons - Table length up to 6000 mm - Choice of 2 or 3 connecting rods - Automatic, continuous fine lubrication with return - Use of progressive lubrication block - Accessible from both rear and front - Sliding covers with magnetic sensors - Induction-hardened and ground gears - Gear-hub connections using tapered lock system PRESSURE: 300 TON SPEED: 40-70 RPM STROKE: 60 MM MAXIMUM DIE HEIGHT: 340 MM TABLE-RAM HEIGHT: 400 MM ADJUSTMENT: 100 MM UPPER TABLE SIZE: 400x3000 MM Lhodpfxoxrbn Rj Adtsf LOWER TABLE SIZE: 400x4200 MM MOTOR: 22 KW MOTOR SPEED: 3000 RPM

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 2,550 mm, sheet thickness (max.): 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Equipped with overload protection * All rolls are driven by hydromotors and planetary gearboxes * Hydraulic opening head allows easy removal of curved parts * Very easy operation with movable control panel * Lower roll positions can be easily read using two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Bearing-mounted conical bending system * Hydraulic balancing system provides parallel movement of shafts * Extended shaft ends to allow mounting of profile and pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special operations * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 12/16 mm Bending: 16/18 mm Upper & Lower Rolls: 300 mm Side Rolls: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Ljdjw Slf Uepfx Adtshf Weight: 8400 kg

Condition: new, Year of construction: 2025, pressing force: 300 t, table width: 900 mm, table length: 1,200 mm, drop-through hole in table: 260 mm, ram adjustment: 150 mm, stroke adjustment: 200 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. Lhedpsvyr Eajfx Adtjf o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 300 Tons Table-Ram Distance 530 Mm Distance Between Walls 1280 Mm Ram Adjustment 150 Mm Press Approximate Width 1700 Mm Press Approximate Depth 2200 Mm Press Approximate Height 3500 Mm Table Hole Diameter 260 Mm Table Size 900 / 1200 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 470 / 900 Mm Table Dimensions from Floor 1000 Mm Stroke Adjustment 20 / 200 Mm Stroke Number/Minute 38 Pcs/min. Engine Power 30 + 2.2 KW Engine Speed 1450 RPM Approximate Weight 18,000 Kg

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 800 mm, table width: 1,000 mm, table length: 1,000 mm, clearance between the columns: 1,000 mm, retraction force: 100 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 300 / 100 Ton Four-Column Hydraulic Deep Drawing Press General Description The CRONOSSTECH 300 / 100 ton four-column hydraulic deep drawing press is a high-rigidity, four-column hydraulic press solution developed for metal forming, deep drawing, and precision pressing applications. Its St52 grade steel frame undergoes stress-relieving via vibration, ensuring stable parallelism and perpendicularity tolerances throughout the full stroke. The ram and bolster systems operate independently; stroke length and tonnage settings can be precisely controlled via the touch panel interface. Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and PLC-controlled structure, the machine provides high efficiency and reliable operation. The automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With a 300 / 100 ton capacity, this model is an ideal industrial press solution for medium to high tonnage metal forming, deep drawing, and die applications. Key Advantages - High-rigidity four-column press frame - Independent stroke and tonnage adjustment for ram and bolster - Full control via touch panel - High precision and repeatability - Long lifespan, low maintenance design Fields of Application - Metal forming applications - Deep drawing operations - Die testing and production lines Lhedox N Unzepfx Adtof - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 300 Ton CAPACITY (BOLSTER): 100 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 800 mm STROKE (BOLSTER): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 900 mm WELDING STRESS RELIEF: Vibration stress relief WELDING PRACTICE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 30 kW – IE3 MAIN PUMP: 45 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/s FORMING SPEED: 12 mm/s RETURN SPEED: 170 mm/s BOLSTER TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 390 mm – Ck45 BOLSTER CYLINDER BORE: Ø 230 mm – Ck45 AUXILIARY BOOSTER CYLINDERS: 2 Units APPROX. PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGE VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 18 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 800 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 100 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, RONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses have been developed with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The H-frame structure with 8 guideways provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 300/100 model, featuring a 300-ton main ram and a 100-ton bottom cushion ram (pot), is specially designed for deep drawing and spinning operations requiring high tonnage. The frame construction is stress-relieved using vibration methods for long life and reliable performance. ⚙️ Standard Equipment - Steel construction, H-frame with 8 guideways - Vibration stress-relieved frame - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TURK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable stroke control for both ram and cushion (pot) - Adjustable tonnage (pressure) control for ram and cushion (pot) - Automatic lubrication system - Electronic filter contamination alert - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHSP 300/100 - Type: Steel construction, H-frame with 8 guideways - Body Material: St52 – ERDEMİR - Slideway Bearings: Bronze Zr14 - Capacity (Ram): 300 Ton - Capacity (Cushion): 100 Ton - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Clearance: 100 mm - Max. Clearance: 900 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TURK-AK EN ISO 15614-1:2017 (Welding applications are supervised by "welding coordination engineers" certified as per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Spinning Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Cushion Table Forward Speed: 30 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 - Cushion Cylinder Bore: Ø230 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Height: 4400 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1350 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” Ledpfxox N Uhbe Adtehf - Switching Components: SIEMENS – SCHNEIDER - Approximate Weight: 21 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 600 mm, table width: 1,000 mm, table length: 1,200 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 300 H-Type Single Acting Hydraulic Press – 8-Guided Sliders General Description The CRONOSSTECH CHP series H-type single acting hydraulic presses are high-rigidity, industrial press solutions developed for sheet metal forming, straightening, assembly, and die-stamping applications. The 8-guided H-frame construction ensures that the high loads generated during pressing are evenly distributed, resulting in stable and repeatable operation. The CHP 300 model is designed to provide long-lasting and reliable performance for medium to high tonnage production requirements. CHP Series – Structural Features Lsdpfex N T E Ejx Adtehf CHP series presses are engineered considering heavy-duty conditions. The frame and carrier components are stress-relieved via vibration methods. Bronze Zr14 slide bearings ensure even load distribution during ram movement, contributing to the preservation of precision over extended periods. ⚙️ Standard Equipment - Steel construction, H-type frame press with 8 guided sliders - Stress-relieved frame and carrier components by vibration - Bronze Zr14 slide bearings - Welding applications certified by TÜRK-AK with WPQR & WPS approval (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - 7'' DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Monitoring of oil temperature and system status of the hydraulic unit via display - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 300 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 300 Tons Movable Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress relief Welding Application: Welding applications certified by TÜRK-AK with WPQR and WPS approval per EN ISO 15614-1/2017 (inspected by certified welding coordination engineers in line with EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/s Movable Table Forming Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 4400 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2200 mm Bottom Table Height from Floor: 1350 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 200 mm, table width: 1,000 mm, table length: 1,400 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, driven by force produced through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety due to their rigid frame structures. The CRONOSSTECH CEHP-TB-300 – H Type Eccentric Press 300 Ton, is designed for high-volume production with a focus on stable operation, die protection, and operator safety. Featuring a monoblock frame, 8-point guided ram system, hydraulic overload protection, and an automatic lubrication infrastructure, it delivers reliable performance suited to continuous production environments. Key Advantages • Stable operation for large dies with 1400×1000 mm table size • Die/equipment protection with hydraulic overload safety • Controlled and user-friendly operation via PLC with touch screen • High operator safety with light curtain protection • Low maintenance needs thanks to automatic lubrication infrastructure Applications • Punching / cutting / die forming operations • Mass production with automatic feeding lines • Heavy-duty die and high-tonnage production processes Standard Features • Steel construction frame • Pneumatic clutch & brake • T-slotted supplementary plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload safety • Motorized ram adjustment mechanism • Light curtain protection • Gear group in closed oil reservoir • Double solenoid safety valve • CE compliance Optional Features • Press feeding systems • Scrap discharge systems • Sliding safety cover at table front • Dies as per custom specifications Technical Specifications (CEHP-TB-300) • Capacity: 300 Ton • Table-to-ram distance: 500 mm • Housing width: 1430 mm • Ram adjustment: 120 mm • Press width: 3100 mm • Press depth: 2550 mm • Press height: 4700 mm Lhjdpfx Aox N Sdmsdtef • Table size: 1400×1000 mm • Ram face size: 1400×1000 mm • Stroke (fixed): 200 mm • Motor power: 45 kW • Weight: 35,000 kg Production / Supply Note This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 200 mm, table width: 1,200 mm, table length: 2,000 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, powered by force generated through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process security in large bolster and heavy die applications thanks to their rigid frame structure. The CRONOSSTECH CEHP 300 – H-Type Eccentric Press (300 Ton) is designed for stable operation in high-volume production, focusing on die protection and operator safety. With its monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it offers reliable performance for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2000×1200 mm table size - Die/equipment protection with hydraulic overload safety device - Precision guidance with 8-point slide and balancer piston - Controlled and user-friendly operation with PLC + touchscreen interface - High operator safety with light curtain (photoelectric safety guard) Applications - Punching/cutting/forming operations requiring a large table - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • T-slotted additional bolster plate • 8-point guided slide • Adjustable stroke on single connecting rod • Balancer piston on slide • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor rotation • Hydraulic overload safety • Motorized slide adjustment • Light curtain safety guard • Enclosed oil tank with gear set • Double-solenoid safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap handling/disposal systems Ljdpfx Aex N Rxvsdtjhf • Sliding safety door at the table front • Custom die manufacturing as required ✅ TECHNICAL SPECIFICATIONS (CEHP 300) Capacity: 300 Ton Table-Ram Distance: 500 mm Housing Width: 2,130 mm Ram Adjustment: 120 mm Press Width: 2,900 mm Press Depth: 2,750 mm Press Height: 4,700 mm Table Size: 2,000×1,200 mm Ram Face Size: 2,000×1,200 mm Stroke (Fixed): 200 mm Motor Power: 45 kW Weight: 41,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.