H-type 300 ton single connecting rod eccentric press

CRONOSSTECH CEHP - TB - 300

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Iaodpfxeg Rn Efe Aadon Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Without transport costs.

Condition: used, TECHNICAL DETAILS - Supply voltage : 400 [V] - Rated current : 49 A - Frequency : 50 Hz - Power : 27 [kW] - Max. Temperature : 80 [°] - Capacity : 650 [l] - Number of tanks : 2 - Inside dimensions : 500x650x300 [mm] - Machine floor space : 1600 x 1900 [mm] - Machine height : 2000 [mm] - Machine weight : 870 [kg] - Used product : Surtec 131 and 084 Iaedjxb Enaspfx Aaden EQUIPMENT - CNC : Siemens

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, pressing force: 200 t, table width: 1,000 mm, table length: 850 mm, overall weight: 17,000 kg, working height: 950 mm, stroke length: 700 mm, Equipment: safety light barrier, Aprotech PH.200R.01 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Simatic S7 control system Optical barriers installed as well. Isdpfx Aaev E Eyhsdean Possibility to check the machine in operation - The press is still connected to the power supply. Aprotech PH.200R.01 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Simatic S7 control system Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: new, Year of construction: 2026, functionality: fully functional, installation height: 500 mm, pressing force: 160 t, table width: 1,250 mm, table length: 800 mm, stroke length: 300 mm, EXNER EX SL 160 double column press NEW Machine is under construction Pressing force 1600 kN Iaodpfx Aeuw S A Doadsn Installation height: 500 mm stroke: 300 mm Table width: 1250 mm Table depth: 800 mm mech. depth stop

Condition: good (used), Year of construction: 2023, functionality: fully functional, die cushion stroke: 200 mm, table width: 1,000 mm, table length: 1,200 mm, pressing force: 250 t, Ejector in ram - approx. 10 t Table drawing cushion approx. 800 x 850 mm Weight approx. 18 tons Stroke approx. 600 mm Iasdpfx Asvga H Eeadsn

Condition: new, Year of construction: 2024, functionality: fully functional, installation height: 400 mm, table width: 1,000 mm, table length: 830 mm, pressing force: 135 t, EXNER New Double column press - Eccentric press DEXRH 135/1000/1 Year of construction 2024 Nominal pressure capacity 1,350 kN Dimensions Clamping plate width depth 1,000 x 830 mm mm Iasdoup Sqkjpfx Aadjn T-slot clamping plate 22 mm Column width 1,050 mm Ram size Width Depth 1,020 x 740 mm T-slot ram 22 mm Centering groove ram width 30 mm depth 15 mm mm Ram adjustment max.100 mm Stroke rate with infinitely variable drive from 30 1/min to 100 1/min. Stroke adjustment from 20 mm to 140 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total height: 6,000 mm, installation height: 1,000 mm, total width: 2,400 mm, total length: 3,500 mm, pressing force: 500 t, table width: 1,500 mm, table length: 2,000 mm, overall weight: 45,000 kg, oil tank capacity: 1,200 l, Equipment: safety light barrier, HIDROLIKSAN HCFP – 500-t Hydraulic Tryout / Toolmaking Press for Tool and Forming Technology The machine is a tryout/tool tryout press designed for tooling in the fields of forming, deep drawing, and toolmaking. It is fully operational, ready for use, and can be inspected and tested under power. The press features a robust 4-column design, a spacious working area, and a hydraulic unit equipped with REXROTH pump technology. Control is managed via a SIEMENS S7-1200 with touch panel and extensive parameterization options. Scope of Delivery & Accessories - GÜTHLE tool sliding and lifting ball system - Hydraulic foot pedal (GÜTHLE) - Roll stand / support console 10 t (GÜTHLE) - 4-channel tool holder system (length 1500 mm, 2 t per channel) - Complete REXROTH hydraulic unit - Air cooler - Foundation plans / manufacturer documentation Condition of the Machine - Fully functional - Hydraulic system leak-free and runs smoothly - Controls & electricals in good condition - Mechanically sound, no visible damage - The machine is assembled and can be demonstrated under power. Press Force: - Rated force: 500 t - Max press force at 250 bar: approx. 510 t Dimensions & Weight: - Overall dimensions (approx.): 3500 × 2400 × 6000 mm - Total weight: approx. 45,000 kg Working Area: Ijdpfxex D Tv Do Aadean - Table size: 2000 × 1500 mm - Internal column spacing: 2000 × 900 mm - Installation height: 1000 mm - Stroke: 800 mm (linearly adjustable via linear measuring system) - T-slots (mounting defined by the customer) Hydraulic System: Main Cylinders: - Quantity: 2 - Piston Ø: 340 mm - Rod Ø: 280 mm Auxiliary/Plan Cylinders: - Quantity: 2 - Piston Ø: 120 mm - Rod Ø: 70 mm Die Cushion: - Force: 150 t - Cylinders: 2 × Ø 310 × 210 mm - Stroke: 400 mm Pumps and Tank: - Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min - Hydraulic tank: 1200 L - Oil system: 1000 L capacity Speeds: - Approach stroke: 120 mm/s - Return stroke: 150 mm/s - Working/pressure stroke: 12 mm/s Control & Safety: Control: - SIEMENS S7-1200 + ET200S - 12" touch panel Schneider Electric Operating Modes: - Two-hand automatic - Setup mode - Single stroke - Stroke without die cushion - Deep drawing mode with die cushion Measurement & Safety Features: - Linear measurement system Novatechnik (63 Bit) for slide and die cushion - SICK safety light curtains front and rear (height: 1050 mm) - Side safety fencing with limit switches - Remote maintenance via Ethernet possible - Mobile operator panel International Notice Block (DE/EN) German: Dismantling, deinstallation, loading and transport are exclusively the responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide equipment, personnel, or loading assistance. Collection only after prior appointment. English: Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony, Germany

Condition: new, Year of construction: 2025, table width: 900 mm, table length: 1,800 mm, pressing force: 150 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, The eccentric press is a type of mechanical press, powered by a force generated via an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses, thanks to their rigid frames, provide high stability and process security, especially in applications requiring large tables and heavy dies. The CRONOSSTECH H-Type Eccentric Press 150 Ton is designed with a focus on stable operation in high-volume production, die protection, and operator safety. The monoblock frame, 8-way guided slide system, hydraulic overload safety, and automatic lubrication infrastructure ensure reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large table dimensions for oversized dies - Die/equipment protection with hydraulic overload safety - Precise guidance via 8-way slide + counterbalance piston - Controlled, user-friendly operation via PLC and touch screen - High operator safety with light curtain protection system Areas of Application - Punching/cutting/forming processes requiring large tables - Serial production with automatic feeding lines - Heavy die and high tonnage production processes ✅ STANDARD FEATURES • Steel construction frame Ijdsx N Ru Dspfx Aadjan • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-way guided slide • Adjustable stroke on single connecting rod • Counterbalance piston on slide • Full automatic fine lubrication system • PLC control system • Piano-type control panel • Touch LCD screen • Motor reverse function • Hydraulic overload safety • Motorized slide adjustment mechanism • Light curtain protection system • Enclosed oil gear unit • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover in front of the table • Dies custom-built to specifications ✅ TECHNICAL SPECIFICATIONS (H-TYPE – 150 TON) Capacity: 150 Ton Usable area of lower table: 900×1800 mm Usable area of upper table: 900×1800 mm Stroke: 200 mm (fixed) Nominal material thickness: 7 mm Speed (SPM): 60 Max. closed die height: 500 mm Min. closed die height: 380 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of eccentric (crank) shafts: 2 Safety system: Hydraulic Electrical components (control panel): Siemens – Schneider Lubrication system: Automatic Screen / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 sets Mounting: Floor standing Frame type: Monoblock Motor power: 22 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×D): 4500×3000×2000 mm Approximate weight: 20 Ton Note: Please contact us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.