Used Dn Solutions Leo 1600 for sale (8,602)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: Gjdpfx Amevf E Avsnsub The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Guedpfeviwdmex Amneb Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: new, Year of construction: 2026, We offer: Pellet machines from the WALW-Solutions brand, featuring unique quality, honest workmanship, and at a fair price. Godpfolt Ugtsx Amneub Honest Work: We manufacture our systems ourselves directly in Poland. Only components such as gearboxes and motors are sourced from reputable manufacturers. All other parts are designed and built in-house, allowing us to meet every requirement individually. Fair Price: We produce in Poland and are transparent about it. Other competitors who label their product as 'Made in Germany' typically only assemble the machines in Germany and source most components from Lithuania. We let you benefit from the lower production costs, which allows our offer prices to often be 40% below those of competitors. These machines for pellet production are completely new to the market in this price/performance segment and are unique in Europe! WALW-Solutions machines are available exclusively through us! From systems for processing your own wood chips from firewood operations or joineries, to professional industrial pellet production from wood chips, straw, miscanthus, etc.—as well as manufacturing hay or straw cobs—we can provide the ideal solution for your needs. Our plants have capacities ranging from 150 kg/hour up to 5 t/hour and come equipped with all necessary components for a fully automated system. We offer tailored solutions for any input material and can integrate automation into existing systems as well. All machines and control units are equipped with components from Siemens, ABB, Schneider Electric, or similar leading brands. Please note: If you have a valid VAT ID, net purchases are possible! We look forward to your inquiry! For more information or direct interest, please contact me on my mobile at:

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Vibration Testing System: ETS MPA102/L620M Sine Force: 600 kgf Random Force: 600 kgf Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Armature Diameter: 200 mm First Resonance Frequency: 3,300 Hz Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). Guodey Sl Uqspfx Amnjb The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Deviations from the technical data as well as errors in the article description are possible and subject to change.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,500 mm, total height: 1,900 mm, total length: 5,000 mm, Oy Foudila Ab is a company based in Kaskinen, Finland, with over 45 years of experience in wood handling equipment. For the past 15 years, we have also been active in the pallet industry and have developed numerous machines for nailing, automatic feeding, and stacking of wood over the years. We manufacture both standard machines and custom-tailored solutions to meet customer requirements. Guodpfx Aoy Izb Eemnob The DNM1600 is a flexible, compact, and efficient pneumatic nailing machine designed for the production of decks in the pallet industry. The user-friendly program allows for very rapid changeover, and the machine can store settings for over 100 different deck specifications. It features Bostitch nail guns equipped with nail magazines for jumbo coils with indicators. The machine enables the manufacturing of asymmetrical decks and is fitted with flexible cassettes for boards. A protective cover ensures noise reduction and safe operation. The machine is operated via a 10-inch touchscreen and utilizes a Beckhoff control system. Standard machine specifications: - Deck board: Length 600–1600 mm, width 75–125 mm, height 16–28 mm - Stringer: Length 600–1500 mm, width 50–125 mm, height 16–28 mm - Deck/Stringer pallet size: Length 600–1600 mm, width 600–1500 mm A two-way pallet kit is available as an additional option, allowing the production of stringer pallets/two-way pallets with a maximum stringer height of 100 mm. Capacity: - 3 decks/min (with 5 deck boards) Machine dimensions: - Length: 5000 mm, width: 2500 mm, height: 1900 mm The machine is CE-marked. The machine can be equipped with automatic board feeding and automatic deck/pallet stacking. For more information, pictures, or videos, please get in touch.

Condition: new, functionality: fully functional, Year of construction: 2026, RSS 600 series Mono Rotor Shredder new model 2026 18.5kw Screen size in consultation Motor cover, pusherbox guide strips, PLC controlled. Conveyor and/or discharge screw is optional available. Guedpfx Aoirt H Aomnjb suitable for various types of plastic/wood/or other material Delivery in consultation Larger or smaller models also available. Intrested ?, reactions with your name, company name and telephone number.

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. Guedpfx Amst Iwt Usnob reactions or questions ? please with full name, company name and phone number.

Condition: new, Year of construction: 2026, functionality: fully functional, We deliver the machines where you want them, install them if you wish by mutual agreement. Optional: stainless steel drain element, stainless steel storage silo, blower, pipes approx 3 meters. Gedpst Iw Huefx Amnjub Grinder 800 series 22 kW or 37 kW 3 x 2 blade set configuration. Bwj3E79Mpn 2 x stators screen deck your request With Variablele Frequency controller, Optional Product discharge and storage in various options in combination extra favorably priced Motor power adaptable. Other adjustments can be discussed such as a rotor adjustment, more blades e.g. 5 rows of blades or heavy duty version. Delivery / time in consultation. Call or email us for consultation or if you have questions, please respond with your name, company name, and correct phone number. Without these correct details RSS Recycling Shredders and Solutions (Netherlands) cannot respond.

Condition: new, Year of construction: 2026, functionality: fully functional, We deliver machines at any place, install when you whish and support you along the way, at any time. Grinder 1000 series 45kW 3 x 2 knife set 2 x stators screen your request Gsdjg Ainqepfx Amnoub Product discharge and storage in various options. Other adjustments negotiable. Delivery in consultation. Call or email us for consultation or if you have any questions, important! name company name and telephone number.

Condition: new, Year of construction: 2026, functionality: fully functional, RSS HD 4 Shaft Shredders Gujdpfsh N Dmnsx Amnsb in any size, Adjustments to e.g. knives, motors, sieve, frame possible. Supply and discharge belts, storage, metal separation possible. Larger or smaller models also available. optional fast hydraulical screen cleaning or changesystem for advise or information do not wait, contact us. Delivery in consultation.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 4 h, power: 45 kW (61.18 HP), Rotor length: 1000 mm, motor power: 45 + 2.2 kW. Hopper size: 1400 x 1000 mm, screen size available on request. Optional conveyor belt available. Delivery upon request. For more information: RSS Recycling Shredders & Solutions Please include company name for inquiries or questions. IMPORTANT! Provide name, company, and telephone number. Guedpfx Amokzg U Densb

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero-LTX-340, The device was used for research purposes. SPE-Spero-LTX-340, MIR microscope with "Hyper Spectral Imaging" function; spectral coverage (1900 to 950 1/cm). Enhanced LowMag lens 4.0X; NA:0.3, 2.0mm FOV. Dedicated IR-transmission mode. Broadband 480*480 pixel microbolometer camera, including high-precision automated stage ( Gujdpfxjyxc Twj Amneb

Condition: good (used), Professional three-phase electric motor from the renowned German manufacturer KAISER – Elektromotoren-Werke Kaiser. Robust industrial design intended for continuous duty in industrial machines, pumps, fans, machine tools, compressors, and technological drive systems. Gusdjy Nm Tvepfx Amnjb The motor features flange mounting and a shaft with a diameter of approximately 28 mm, with a keyway. Technical data: • Manufacturer: Elektromotoren-Werke Kaiser • Type: DN 112 S/2 • Power: 4.0 kW • Voltage: 380V • Current: 9.0 A • Frequency: 50 Hz • Speed: 2880 RPM • Three-phase motor • Shaft diameter: approx. 28 mm • Flange mounting • Durable industrial housing • Made in Germany Applications: • Pumps • Fans • Industrial machinery • Machine tools • Compressors • Technological drives • Production equipment Condition: Used item. Shows normal signs of use and storage. Visual condition as shown in the photos.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 120 mm, total length: 220 mm, total height: 245 mm, usable tank capacity: 3,300 l, Safe compliant with Valrem. Fire resistance > 120 minutes External dimensions: Gedpfoykapfox Amneub Length: 220 cm Width: 120 cm Height: 245 cm Internal dimensions: Length: 170 cm Width: 95 cm Height: 210 cm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Model - Formpack F0 TMF Long Version. Serial number - F438. Date of manufacture - 2019. Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Reel core diameter - 76mm. Thickness - 500 microns. Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Gusdswp Ac Hopfx Amnob Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Previously used for packing various meat products. Last run in May 2025.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero QTX-340, The device was used for research purposes. SPE-Spero QTX-340, MIR microscope with 'Hyper Spectral Imaging' capability. Spectral coverage of the fingerprint region (1900 - 950 1/cm). High-Resolution IR Objective: 12.5X; NA: 0.7, 650μm FOV. Enhanced LowMag Lens Visible: 4.0X; NA: 0.13, 650μm FOV. 480*480 pixels, Broadband Microbolometer Camera, Visible camera. QT-Laser-Performance-Package including high precision automated stage (< 1μm repeatability). High-speed data acquisition, joystick, control computer, Win10. 'Discrete Frequency IR Imaging' in real time. Transmission and reflection mode. 4000 hours laser active time. Godoy Dcd Hspfx Amnjub

Condition: new, Year of construction: 2023, operating hours: 4 h, functionality: fully functional, machine/vehicle number: N/A, overall weight: 6,000 kg, tank capacity: 2,000 l, power: 620 kW (842.96 HP), continuous power: 5,600,000 kW (7,613,872.00 HP), continuous power (apparent): 700,000 kVA, total length: 500 mm, total width: 180 mm, total height: 274 mm, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, noise level: 82 dB, rotational speed (min.): 1,500 rpm, type of input current: three-phase, warranty duration: 12 months, A new industrial diesel generator built into a sound and weather proofed canopy, constructed from galvanized steel and fitted with a residential exhaust muffler. Manufactured in the UK using UK and EU components, it has a bunded internal 2000ltr base fuel tank, a Scania DC16 078A-02-43 1500RPM water cooled diesel engine coupled to a European alternator and controlled by a Deep Sea Electronic Module. Godpfx Amsrdzg Honsub The generator is supplied with a special catalyst (SCR) system to achieve Tier 5 emissions compliant with a 2500ltr Urea tank(ad-blue). This is new still in the box, the installation is included via the European manufacturer of the system. The 82db sound level is measured at a1m distance from the generator, see attached images of the generator when under load test and relevant brochures.

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. Gsdpfeyt Nm Eox Amnoub The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. Gsdpfx Aoyt Nhvemnoub The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. You can view this machine in our showroom in Bergeijk.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 Gsdpfexd Ubnox Amneub 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Serial - 1013. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Note 🗒️ No printer.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 2,150 mm, total width: 1,805 mm, total height: 2,320 mm, overall weight: 2,850 kg, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This machine is as good as new, has only been displayed in the showroom and has been used as a demo model. Godpfx Aex Uz Ilomnjub F800 – All-round finishing machine Discover the advanced F800 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programmes, ensuring high reproducibility of product quality and minimising operating errors. Depending on the materials to be processed, you can choose a system with vacuum or magnetic support. On the input side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating cup brushes that exert light pressure. The brushes ensure uniform rounding of all edges and holes, both around and inside the flat-ground product, resulting in the most optimal finish. The F800 offers automatic brush calibration options that ensure consistent precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future!

Condition: excellent (used), Technical Details : Year of manufacture: 1985 (fully electric in 2007, partial in 2010 underwent a mechanical overhaul.) The mesh max. width: 1500 mm Mesh density: 15 welding heads in arbitrary distribution Increment: 20mm – 200mm. Gjdpfx Asryv S Ujmnsub Wire thickness: 1.2mm - up to 2.2mm (max 650 N/nmm - We have already welded 2.5mm also wired.) Energy demand: 14 kVA (max) Weight: approx. 8 tons Drive: digital servo, control (PLC). Stepless regulation.. Accessories: manual

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Guedpjicic Hefx Amnsb Weight approx. 2000 kg Very good condition

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. Guodpfx Amshnc E Aoneb The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Condition: excellent (used), Year of construction: 2010, Converging Solutions Converging Conveyor Model: Integrator 3 Syncro Serial number: CS5653 Year of construction: 2010 230 V, 16 A Belt width: 680 mm and (6x) 320 mm Clearance: 680 mm x 190 mm Total dimensions: 2280 mm x 850 mm x 1240 mm. Gedpfx Amsv Tx Uzsnoub