Used Dominioni Pt100 for sale (52)

Year of construction: 2007, condition: used, dimensions 1.900 x 2.131 x 3.023 ,, weight of the machine ca. ca. 2.200 kg In our assessment, the heating element welding machine is in good used condition. Technical Specifications: Compressed Air: - Max. operating pressure: 6 bar - Compressed air consumption: 0.2 Nm³/cycle at 5 bar Heating Mirror: - 2x12 WALTOW heating cartridges, Ø12.5 x 400 mm, 1000 Watts, 230 Volts - 2x PT100 thermocouples - Heat-up time to 350°C: approx. 50 min Vacuum Pump: - BECKER vacuum pump, Model VT 4.16, 550 Watts Accessories, as well as the tools and clamping devices shown in the images, Nodpfxozbvnxj Am Tsld are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2012, Overview  Nedpfsyb S Egox Am Tsld This 20 hL brewhouse was manufactured in 2012 by Schwarzenbeker. It is a 2-vessel system (Mash/Boil + Lauter/Whirlpool) with a net capacity of 18–19 hL and a maximum mash load of 600 kg. The brewhouse is steam-powered with a double steam jacket and PLC-based automation, offering recipe management and precise process control. It is in generally good condition, though a minor review is recommended. The package also includes a biomass steam generator (Teivy, 2012), a malt mill (Robix, 2012), and a plate filter (Cespedes, 2013). Technical data  - Capacity: 20 hL gross / 18–19 hL net - Configuration: 2-vessel system – Mash/Boil + Lauter/Whirlpool - Max. mash load: 600 kg - Average efficiency: 83% - Average lautering time: 2 hours - Heating system: Double steam jacket (lateral + bottom, independent) - Max. pressure: 3 bar - Automation: Touch-screen PLC, VFD for pump/agitator/cutter, temperature control, programmable mash recipes - Monitoring: PT100 temperature probes in Mash/Boil and heat exchanger outlet - CIP: Spray balls in Mash and Lauter vessels - Safety: Pressure relief valve in Whirlpool - Other features: Auger feed connection, operation manuals included Scope of Delivery  - Brewhouse | Schwarzenbeker | 20 hL Brewhouse | 2012 | 2-vessel system, steam-heated, PLC automation - Steam Generator | Teivy | Biomass Steam Generator | 2012 | Pellet-fired, fully functional - Malt Mill | Robix | Roppi-1100 | 2012 | Incl. metal detector magnet - Plate Filter | Cespedes | – | 2013 | 50–98 plates, adaptors included, no pump  

Condition: used, Year of construction: 2016, Overview  This complete 1,500 L brewhouse system was manufactured by Spanish company Inox GC. It includes a three-vessel hot side, a 2,000 L mash/whirlpool tun, a 2,500 L lauter tun, and a 1,800 L hot water tank. The brewhouse comes with pumps, heat exchanger, CIP features, and a new AEM automatic gas burner for heating. The equipment is in good condition. Technical data - Brewhouse System – Inox GC (1,500 L) - Capacity per batch: 1,500 L - Vessels: HLT, mash/lauter tun, kettle/whirlpool - Material: AISI 304 stainless steel - Heating: Compatible with automatic gas burner - Includes: Temperature control panel, integrated pumps - Isothermal Mash & Whirlpool Tun (2,000 L) - Capacity: 2,000 L - Insulation: 50 mm rock wool - Features: Hinged lids, agitator with VFD, CIP system, PT100 probe - Isothermal Lauter Tun (2,500 L) - Capacity: 2,500 L - Features: 5° sloped bottom, 500 mm manway, German V-screen, automatic rake, CIP system - Insulated Hot Water Tank (1,800 L) - Capacity: 1,800 L - Heating: 9 kW electric element - Features: Rock wool insulation, 50 mm inlet/outlet, CIP system - Process Equipment - Wort pumps (helical & transfer) - Tubular heat exchanger (removable) - Hop filter - Automation panel with VFDs - Automatic Gas Burner – AEM GR8 PHP (2016) Nlodpfx Ajyb S D Nom Tod - Type: Circular gas burner, automatic ignition

Condition: excellent (used), Julabo Type: FP51-SL (v.2) Cryostat for low temperatures below -50 °C with a bath opening for internal and external temperature control. Cryostat circulators from the HighTech series, with HL or SL thermostats, are equipped with powerful pressure and suction pumps. The devices offer the full range of functions of the professional HighTech thermostat series. Technical data for FP51-SL Dimensions and volume Dimensions (W × D × H) 46 x 55 x 89 cm Filling volume 7.5 ... 12 l Weight 90 kg Pump connection thread M16x1 external thread Temperature values: Working temperature range -51 ... +200°C Temperature stability ±0.05°C Setting of the temperature display resolution 0.01°C Temperature display resolution 0.01°C Permissible ambient temperature +5 ... +40°C Supply voltage 400V/3PNPE/50Hz (plug 16A CEE) (R507) Performance data: Heating power 3 kW Cooling power 20 °C 2kW, 0°C 1.5 kW, -20°C 1 kW, -40°C 0.26 kW Refrigerant R507 Nsdpezgaa Iefx Am Teld Global warming potential 3985 Filling weight 1030 g Carbon dioxide equivalent 4.10455 t Pump performance Flow rate 22 ... 26 l/min Pump performance Delivery pressure 0.4 ... 0.7 bar Maximum suction capacity 0.2 ... 0.4 bar Viscosity max. 70 cSt Current consumption 16 A Electronics Interfaces Profibus optional Pt100 External sensor connection integrated Integrated program generator 6x60 steps Temperature control ICC Absolute temperature calibration 3-point calibration Temperature display VFD Temperature setting Keypad Voltage variants 400V/3PNPE/50Hz (plug 16A CEE) (R507) Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Fe-Ma-Tech Bag Melter Glue Application Unit: - Type: advanced PUR 2 kg light eSmart - Year of manufacture: 2022 - TOP condition - Weight: approx. 70 kg - Dimensions: 550 x 430 x 970 mm Nodpfjw I S Eaex Am Told - Type of glue pump: Gear pump - Pump nominal speed: 93 rpm - Base tank size (reservoir): approx. 1 liter - Melting capacity: up to 2 kg/h - Temperature sensor: PT100 device and external heating / optional Ni. 120 - Control accuracy: +/- 1°C The PUR 2 kg light eSmart bag melter is suitable for edge banding machines with lower adhesive consumption. Tank size is compatible with all standard PUR bag packages in sizes of 2-3 kg. Modular system: All components can be replaced individually. Simply remove the sheet metal cover to quickly access all relevant parts. Melting capacity up to 2 kg/h (depending on the adhesive and its viscosity). The solid PUR adhesive, wrapped in aluminum foil, is placed into the tank. The adhesive is gently melted as needed. A glue reservoir is located beneath the tank, holding up to 0.7 kg of liquid adhesive. From there, the adhesive is conveyed via a gear pump, through a FE-MA-TECH® hot-melt hose and heated application head (valve) into the application units (IMA, Homag, etc.). The system is completely airtight, allowing the adhesive to remain in the unit for several months when used properly. Shipping via freight forwarding is available for an additional €190.40 #8404

Condition: used, Year of construction: 1999, Insulated and clad stainless steel tanks standing on upright frames, each with three frame cooling zones and one cone cooling zone. Additional title: outdoor tanks Volume: 1700 hl Operating pressure tank: 1 bar Operating pressure cooling: 4 bar Test pressure: 1 bar Nsdpfxozgcuuo Am Tsld Width: 3,8 m Height: 18,1 m Weight: 13 t Material: Stainless steel 1.4301 Position: Vertical Base construction: Skirt Features: PT100, full and empty detection probe, 4 cooling zones (3 frames, 1 cone, 42 l, 42 l, 126 l, 35 l), safety valve

Condition: new, Year of construction: 2019, functionality: fully functional, power: 250 kW (339.91 HP), rotational speed (min.): 992 rpm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,759 kg, SIEMENS squirrel-cage induction motor: 1LE5603-3AC83-3GR3-Z_250kW, B02+B60+B61+H00+L51+Q01+Q02+Q72+R16+D47 Nlodpfszm U N Dsx Am Tod 6x PT100 sensors in the winding, PT100 sensor in each bearing, Anti-condensation heating 230 V/50 Hz, SPM nipples for vibration measurement, Insulated bearing on the non-drive end (NDE), Protective coating for C3 environment, EAC certificate. 250kW, inverter supply 380V (from a 400V grid), 50 Hz, 992 rpm, IMV1 with canopy, flange mounting with downward-facing shaft, IP 55, powered by a low-voltage converter, 490 A, 2407 Nm, self-ventilated IC 411, ambient temperature from -20 °C to +40 °C, altitude up to 1000 m above sea level, weight approx. 1,759 kg.

Condition: new, Year of construction: 2024, R5 RA 1600 B 4EB XXXZ 4.00 PCS 05.12.2023 25,000.00 / 1 PCS 100,000.00 Explosion protection Ex Inside II 2G Ex h IIB T3 Gb X Outside II 3G Ex h IIB T3 Gc X Without motor Ex B5-550 d65 50/60Hz Coupling PKZ 20 ATEX Oil separator with: - Antistatic venting element - G3/4 for thermostat probe Heat exchanger 41.2kW without air cooler Base frame with bore d50 Vibration dampers 4xd100 + 3xd150 Cooling water inlet G1/2 vertical with temperature controller Water valve, bypass with ball valves, G1/2 coupling Cooling water outlet G1/2 vertical with G1/2 coupling Ball valve DN25 G1 in oil drain Without temperature switch in gas Without temperature switch in oil Without level switch G3/4 Filter differential pressure gauge elevated with angle Thermometer 0-120°C R1/2 with extension Without resistance thermometer PT100 valve side 4 units available Unit price !!!!! Nledpeyzbd Tjfx Am Tsd

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Nlodpfx Ajv Si Szjm Tod Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 741 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 633 A, type of input current: three-phase, overall weight: 2,980 kg, Name: AC-LV squirrel-cage motor, efficiency-class 2 Manufacturer: EMZ Nedpjzl Ddujfx Am Teld Type: AKR 400-06-033 Rated output [kW]: 355 Duty type: S1 Rated speed [rpm]: 7410 Number of poles: 8 Direction of rotation: Both Rated voltage [V]: 400 Voltage fluctuations [+/- %]: 5 Connection: Delta Rated frequency [Hz]: 50 Frequency fluctuations [+/- %]: 2 Rated current [A]: 633 Locked rotor current [Ia/In]: 6.5 Type of construction: B3 Degree of protection: IP55 Cooling method: IC411 Frame material: Cast iron Insulation class: F Temperature-rise: B Efficiency [%]: 95.2 Efficiency 3/4,2/4,1/4 [%]: 95,4 / 92,4 Efficiency class: IE2 Power factor [cos phi]: 0.85 Power factor 3/4,2/4,1/4 [cos phi]: 0,83 / 0,74 Rated torque [Nm]: 3424 Locked rotor torque [Ma/Mn]: 1.4 Breakdown torque [Mk/Mn]: 2 Moment of inertia J [kgm˛]: 21,2 Number of starts [cold/warm]: 3/2 Ambient temperature: > -20°C < 40°C Altitude above sea level: < 1000m Bearing design: Antifriction bearing Bearing design [d-end/nd-end]: 6326-C3 / 6326-C3 Fixed bearing: Nd-end Regreasing device: Yes Type of shaft: Cylindrical Shaft-dimensions [mm]: 110 X 210 Shaft-height [mm]: 400 Position of terminal box: On top Cable entries: 7x M63x1,5 Winding protection: 2x 3PTC Bearing protection: 1x PT100/bearing Heating elements: 1x200W

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h Nljdpfjx R D Efox Am Ted EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection Nedpfxoyug R Rs Am Teld • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs Nedpfx Amoyug Hxs Told • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, Cheese vat / Pasteuriser / Process tank 350 liters. Custom engineered for a German Goat Cheese Dairy Used - Untested - Please read The Vat: - Manufacturer: Edmund Erdmann (Germany) - Year: 2004 - Completely stainless steel 1.4301 / AISI 304 - Inside: polished / outside: Glass bead blasted - Diameter inside / outside: 100 cm / 117 cm Depth inside: 49 cm - Empty weight: 850 kg (according to manual) - Double jacket (no insulation) - Hot water circulation system with built-in heating elements (8 x 4,5 kW = 36 kW) - Volume: 350 liters - Butterfly valve, DN 65 - 2-part cover - Gate-Agitator (removable) mounted on a bridge. Can be raised with a lever (see photo';s). - Agitator motor: 0,37 kW / 20 RPM - Brand: KEB - in working condition (tested) - Circulation pump: Brand: Wilo - Several (safety) sensors (cover - butterfly valve) - Magnetic valves - Temperature sensor PT100 - Custom engineered / Very solid tank and construction. Control Cabinet - 2 thermostats - Temperature recorder - Several switches for: - Agitator - Heating - Incubation - Circulation pump - Magnetic valve - cooling water - Heating elements (on/off) Nodjy N Dagspfx Am Tsld Please take a look a the photo's A German user-manual is included. IMPORTANT: This machine is sold "Untested" - "as is" This machine came from a business closure and was already disassembled when purchased. We have never assembled and tested this machine. It is very likely that several parts need to be replaced. The machine is sold as NOT Running. You will have extra costs. We did test the agitator motor and it runs. Price is based on the value of the jacketed tank. With some adjustments this tank can be heated with an external heating. The vat comes with a lot of cable. Some of these cables are damaged. The control cabinet used to be "built in" a wall. The vat comes with a manual and parts-list.

Condition: used, functionality: fully functional, total height: 6,300 mm, total width: 2,700 mm, tank capacity: 15,000 l, For sale: 4 units of professional Holvrieka Nirota stainless steel process/storage tanks. Intended use: Ideal for the food or chemical industry. Capacity: 15,000 liters (15 m³) each. Dimensions: - Total length: 6.30 m - Cylindrical section length: 3.90 m - Outer diameter: 2.70 m Construction: - Conical bottom with central outlet (ensures complete drainage) - Top-mounted inspection manway Nljdpfoy Nbfmjx Am Tod Agitators: High-quality drives by JONGIA (Netherlands), type JDR 4/6. Two-speed motors: 4 kW / 1.1 kW (380V). Outdoor-ready, equipped with protective covers. Endress+Hauser Instrumentation: The tanks come equipped with mounted sensors: - Hydrostatic level measurement (E+H Deltapilot M, range 0-400 mbar) - Temperature sensor (E+H TR45 with Pt100 probe) - Additional level sensors in a side recess Aluminum working platform. External access ladder with safety cage. Condition: Very good, equipment ready for installation. Please contact us for pricing and further details.

Year of construction: 2000, condition: used, Cylindrical fermenter with side outlet in the lower part of the frame and cleaning connection in the hinged lid. Total volume: 1343 l Net volume: 1000 l for fermentation Length: 1495 mm Width: 1495 mm Height: 900 mm Material: stainless steel Nljdpfxsw Td Eis Am Ted Features: PT100 and magnet valve for temperature control

Condition: used, Year of construction: 1979, Fully-automated yeast propagation plant with 2 cylindroconical tanks each 60 hl in stainless steel for yeast propagation and 2 cylindroconical tanks each 60 hl in stainless steel for yeast storage, 2 tanks for yeast propagation each: 80 hl total volume 2 tanks for yeast storage each: 80 hl total volume Material: stainless steel Njdpfx Amsvcqkge Tjld Features: Yeast propagators and yeast tanks have a cooling zone + 1 cone cooling, PT100, weigh cells, circulation pump, yeast aeration

Condition: used, Year of construction: 2014, Manufacturer : Alliance Inox Industrie Type: Vertical cylindrical stirred tank Year : 2014 Useful capacity: 3,000 litres Nlodjyvv A Tjpfx Am Tsd Material : 304 L stainless steel Operating temperature: 20 to 60°C Agitation: 2 three-bladed impellers, 100 rpm Engine power: 10 kW ATEX class: Ex zone II T3 ext   Jacketed : 837 L Pressure: 1.5 bar Heating: 2 x 4.5 kW immersion heaters PT100 temperature sensor: inside the tank Sonde de température PT100 : Jacket   Empty weight : 2000 kg Dimension : Ø 1563 x 4831 mm Central drain DN63   Motor checked and tested prior to sale. Drawing available on request

Condition: used, Year of construction: 1999, Overview The micro brewery was manufactured in 1999 by theGerman manufacturer BERAPLAN. All equipment is in good condition. A new wort copper was added in 2018.  List of equipment: 1. Mash Tun Made by Beraplan in 1999 Cylindric shape with conical ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1600 mm Height conical part: 20 0mm Volume: maximum 38 Hl Double sidewall Insulation Heated by steam, which can be regulated Hot and cold water inlet at the bottom Can be emptied through the bottom 4 CIP balls PT100 2 agitators Mach pump with variable speed drive 2. Lauter Tun Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1200 mm Volume: maximum 37 Hl Filtering ground with trapezoidal perforations High precision valve to regulate the flow rate Hot and cold water inlet at the bottom 4 CIP balls PT100 3. Wort Copper Made by FRACCHIOLLA in 2018 Heated by steam Cleanning balls Temperature sensor Transfer pump from Alfa Laval Solid C-2 (3 kW) 4. Whirlpool Made by Beraplan in 1999 Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 1250 mm Volume: maximum 40 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (2,2 kW) 5. Hot Water Tank Cylindric shape with flat ground Material: stainless steel AISI 304 Inner diameter: 2000 mm Height: 2700 mm Volume: maximum 85 Hl Double sidewall CIP balls Transfer pump from Alfa Laval Solid C-2 (7,5 kW) Heated by steam with temperature regulation 6. Heat Exchanger Made by MDC (France) Plate heat exchanger double zone model: RDC 307 Capacity: 30 Hl/h from 85°C to 16°C 7. Ice Water Unit Capacity: 1000 l New pump Nljdpfx Amol Hxmdj Tjd

Condition: new, *TECHNICAL SPECIFICATION: Heating power hot circuit: 48 kW heating capacity cold circuit: 12 kW cooling capacity hot circuit: 42 kW cooling capacity cold circuit: 270 kW medium: water up to 200°C Max. external volume: 10 ltr at 200°C Max. flow rate: up to 200 l/min  max. delivery pressure: up to 6,5 bar motor power: 5,5 kW Dimension LxWxH: 1.395 x 753 x 1.180 mm Weight approx. 580 kg *HIGHLIGHTS EQUIPMENT: Nlsdpfx Amjg Ey Ufe Tod -regulation and control via SPS with touch screen -heating via stainless steel tubular heating elements made of Incolloy -Heating control via solid-state relay -control box IP54 externally ventilated2 -electrical wiring on terminal blocks -pot. free input for signal for cold/warm changeover (front door) - Pot.-free contact for collective alarm on 3-pin plug-in connector (front door) (front door) -temperature control unit with heating and cooling circuit, for connection of a valve station for quick changeover between hot and cold circuit -temperature controlled feed of the return water -level monitoring with automatic level compensation -dirt filter in the cooling water supply and in the return of the circulation system -Separate automatic filling with strainer -Flow measurement in differential pressure principle in both circuits -monitoring of the heating rod surface by temperature sensors -System pressure control, necessary compressed air connection: 6 to 8 bar -booster pump type DS 360 for water make-up -corrosion-resistant components (VA, MS) -unit mounted on rollers and ready for connection *OPTIONS: -System EcoTemp for intermittent operation -connection for ext temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This device is compliant with the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2009, condition: good (used), functionality: fully functional, Production of 2000 kg/day (6h) Composed of: URBASA Q908.010b slicer MARRODAN PR32318 B/T elevator to load scalder. With PVC/Polyurethane 3C 500 band with studs. overall length: 3000mm. useful width: 500mm. Power 0,37 Kw MARRODAN PR32217 Linear mesh scalder, for vegetable products. The regulation of the scalding/hydrating system is carried out by means of a temperature controller connected to a PT100 probe. The forward speed is regulated by a frequency variator. Basic construction in AISI 304 STAINLESS STEEL Polypropylene mesh type A-1061mm Total installed power: 4.7kW Group of 2 pulping machines and 250-litre heated tanks for mixing and cooking INOXPA HYGINOX SE centrifugal pump of STAINLESS STEEL, driving the product to exchanger. Nedpfxsv Ivcxs Am Teld UNICUS type HRS dynamic heat exchanger with scraper device to increase the heat transmission coefficient AVAILABLE DOCUMENTATION

Year of construction: 2021, condition: like new (used), Memmert ICH 260 chamber, manufactured in 2021, in like-new condition. This unit was used for display purposes. One-year warranty on spare parts. Manufacturer’s description: Operating temperature range without humidity: 0 to +60 °C Temperature setting range Nedpfx Aezam Hvom Tsld 0 to +60 °C Operating temperature range +10 °C to +60 °C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over the function in case of an error Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5%

Year of construction: 2021, condition: excellent (used), Memmert ICH 260L chamber from 2021. The unit comes with a one-year warranty on spare parts. Manufacturer's description: Nedpezam Hiefx Am Tsld Temperature Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range from +10 °C to +60 °C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of an error Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5% Light Daylight and ultraviolet light can be programmed individually using the controller Light cold white light +/- 6%, for UV light +/- 10% Light lighting unit consisting of 4 cold white fluorescent lamps (standard D65 lighting, 6500 K) and 2 UV lamps in the spectral range of 320-400 nm

Year of construction: 2024, condition: like new (used), Memmert HPP 1060 eco chamber, manufactured in 2024. Ex-display unit with a one-year warranty on spare parts. Manufacturer’s description: Nedpfozam E Sjx Am Told Temperature setting range without light, with humidity: +5 to +70 °C Temperature setting range without light, without humidity: 0 to +70 °C Operating temperature range without light, with humidity: +5 (at least 20 °C below ambient temperature) to +70 °C Operating temperature range without light, without humidity: 0 (at least 20 °C below ambient temperature) to +70 °C Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of an error Humidity Humidity setting range 10 - 90% relative humidity Humidity humidity supplied via distilled water from an external tank using a self-priming pump Humidification humidification using a hot steam generator Dehumidification dehumidification using a desiccant unit employing Peltier technology Humidity setting accuracy 0.5% relative humidity

Year of construction: 2018, condition: ready for operation (used), Number of heating cartridges: 24, heating cartridge average and length: 12.5mm/200mm, power: 630W, 230V, including resistance thermometer type PT100, heating time to 350°: 40min. Dimensions X/Y/Z: 1900mm/2100mm/3040mm, weight: approx. 2200kg. Documentation available. Nlsdpetp Nacsfx Am Ted