Used Speedmaster 72 for sale (6,896)

Condition: excellent (used), Weiss Type: WK3-340/70 Weiss Air-Cooled Climatic Test Chamber Touch Panel Control Unit Kfsdpsv Sr Hzsfx Ah Usa All control and operating commands can be triggered by simply touching the function symbols on the touch panel control unit. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Plug-ins The test chamber is equipped with plug-ins on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Penetration included in standard equipment R1: NW 125 mm L1: NW 85 mm Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for temperature tests: Minimum temperature -72°C Maximum temperature +180°C Temperature deviation, temporal ± 0.1 to ± 0.5 K Temperature homogeneity, spatial ± 0.5 to ± 1.5 K Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min Data for climatic tests: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Operating data: Test room lighting: 2 x 24V, 50W halogen bulb Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Fuse: 16 A slow-blow (on-site) Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your safety, the following information is provided as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), functionality: fully functional, Mazak tool holders for sale Total 72 pieces suitable for Mazak QT-QTN 100/100M/100MS/100MSY 12D SQT 100/100M/100MS/100MSY 12D QT-QTN 200/200M/200MS/200MSY 16D SQT 10/10M/10MS/10MSY SQT 20/20M/20MS/20MSY 16D SQT 15 QT-QTN 150 ? 27x rotary holder 5x original Mazak 22X IVO/Heimatec 24x boring bar holder 3x original Mazak 21x IVOHeimatec 21 pieces can also be used for solid drills or boring bars with IK 4x solid drill holder 1x original Mazak 3x IVO/Heimatec 2x rotary holder 90 degrees original Mazak 7x driven tools axial 1x original Mazak 6x IVO/Heimatec Kjdevn Inaspfx Ah Uofa 6x driven tools radial 2x original Mazak 4x IVO/Heimatec 2x driven tools swivel head ± 90° adjustable 2x Heimatec Price €8000 The price is net, excluding shipping Tel 0031 499570179 or 0031 629011138 Mgr Arno

Condition: excellent (used), Type: Weiss WT3-340/70 Very good condition Weiss temperature cabinet with S!MCON / 32 control, air-cooled (refrigerant (R-404A) (can be converted to R452A on request) Test room capacity: approx. 335 liters Test room dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Data for operation: Test room lighting halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Nominal current: 12.5 A Nominal power 4.1 kW Fuse provided by customer 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 58 dB(A) Data for temperature tests: Temperature range: -72 to +180 °C Temperature deviation over time in the middle of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating: 3.0 K/min Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-404A / R-23 Weight: 585 kg For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: Kfedpfx Ajv Edd Seh Uoa 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run with calibrated measuring devices. Condition: used / used Very good condition

Year of construction: 2001, condition: good (used), Kaeser BSD 72 compressor Kfedpfxomnqkio Ah Uea

Condition: used, Vibrator 4 tubs WALTHER TA.4/72 Internal tub dimensions: L 800 x W 250 x H 300 mm Coating: Tubs No 2/3/4: good condition - Tub No 1: used Motor: 7,4 kW New electrical panel: starting by electronic variator Concrete base Kjdpfx Aexr E E Teh Usfa 2 exits at the front Voltage: 380 V Dimensions (L x W x H): 2500 x 2100 x 1200 mm Weight: approx. 3 T

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes Kedpfx Asu H R Iwsh Ujfa - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: excellent (used), Year of construction: 2006, Year 2006 Cutting width 72 cm Spare knife Air table Kfsdpfx Asv H Eyqjh Uoa

Year of construction: 2006, condition: new, I sell 12 sets of new saw blades suitable for HOLZMA panel beam saw machines. Main saw blade FABA 600 x 5,8 / 4,0 x 60 Z 72 Kfedpfxjg Dvuto Ah Usa Scoring saw blade AKE 26 200 45H 200 x 4,8 - 5,8 x 45 Z=36 Price totally 1000 Euro. Available immediately.

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Ksdpfx Aorn Sqhoh Uefa Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Kfedpfx Aeixqg Nsh Uea Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Kfsdpfeihf Ufox Ah Uja Hydraulic Peeling Table Driven Pinch Rolls

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Kfodoihf Twepfx Ah Uoa Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: good (used), Year of construction: 1996, Heidelberg SM 102-5P3 Year: 1996 Size: 72x102 cm Impression Counter: 236 Million Perfector: 2+3 /5-0 CPC 1.04 CP Tronic Alcolor Dampening Semi Auto Plate Change Auto Roller Washer Auto Blanket Washer Preset Feeder Technotrans Cooling – Recirculation Grafix Powder Spray Steel Plate in Feeder - Delivery Central Air System – no compressor Net Weight 34,730 kg Length 1,010 cm Width 331 cm Height 217 cm Kfodpfx Asx Na Ugjh Uja Format Max X 72 cm Format Max Y 102 cm Format Min X 28 cm Format Min Y 42 cm Printing Surface X 70 cm Printing Surface Y 102 cm Max. Paper Strength 0.8 mm Min. Paper Strength 0.03 mm Stacking Height Feeder 123 cm Stacking Height Delivery 121 cm Still in production Available immediately

Condition: good (used), geared motor, electric motor -Speed: 72 rpm -Power: 0.25 kW -Design: B14 angle -Shaft: Ø 20 mm Kedpfx Ahob A Rm Eo Ujfa -Protection class: IP 65 -Dimensions: 320/200/H220 mm -Weight: 9.5 kg

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain Kfsdsu T Hrvepfx Ah Uoa -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: used, Year of construction: 1999, functionality: fully functional, Heidelberg Speedmaster SM52-5 5 Colour or 1+4 perfector CPC 1-04 Alcolor dampenng Autoplate Kfodpfx Asw Sltroh Uja Technotrans refrigeration and recirculation Weko powder spray Max sheet size: 37 x 52cm Length: 5.5m Width: 1.85m Height: 1.62m Age: 1999 Price: Euro 39,500 FOB

Condition: ready for operation (used), Galil DMC 1540-72 servo controller for 2-axis control, SN: KK-3092, used, in good condition, 100% functional, scope of delivery as per photos. Kedox Erphopfx Ah Uefa

Condition: used, WEBSTER & BENNETT EH 72” ELEVATING RAIL VERTICAL BORER MAKE WEBSTER & BENNETT MODEL EH 72” TABLE DIA 1850 mm SWING 2150 mm HEIGHT UNDER RAIL 1200 mm SPEED UP TO 83 rpm FEED RATE 0.004-0.875 inch/min PLUS UPGRADED WITH BALL SCREWS Kodpoxt Hybefx Ah Uofa 2 AXIS DIGITAL READ OUT MIMIK COPYING ATTACHMENT ELEVATING RAIL SET OF JAWS SET OF TOOL HOLDERS COLUMN MOUNTED MOTOR

Condition: good (used), Year of construction: 2004, functionality: fully functional, STEINEMANN LAMINATING MACHINE • TYPE : LOTUS 72 SF • SIZE : 72 x 102 cm • YEAR : 2004 DETAILS: Speed 10-80 m/min. Minimum Sheet Size: 22 x 30 cm Maximum Sheet Size: 72 x 102 cm Sheet Production: >10.000/h Sheet Weight SF: 100-600 g/m2 Adhevise Application SF: 1.5 – 4.0 g/m2 Working Width 72 cm Film Thickness 10-50 µM Film Roll Diameter 350 mm Energy Consumption 24/66 kW It is Very Good Condition Kfedpfx Ahsvm Aipe Uja Available Immediately.

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 Kfjdpfx Ahjxdlx Ro Usa - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Controlled axes: Tiltable - Manually adjustable axes: Cutting height - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - └ Spindle speed control: Incremental - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, Technical data: Kfodpfx Aorwlwvoh Usa Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Condition: good (used), Year of construction: 2003, functionality: fully functional, Prinect Classic Center Control Station Heidelberg Autoplate (Automatic Plate Changing System) Washers Grafix Alphatronic 200: Powder Sprayer Kedpoxrtbvefx Ah Uofa Alcolor Dampening Technotrans Combistar compact alpha c. 120 L Ink Temp Control Impression Account: 62 Mio.

Condition: good (used), Year of construction: 2011, Make WM Model FC 780E Year 2011 Condition Excellent Approx Working Hours 25,390 Stations Forming Cutting and Stacking Max Tool Size 780 x 570 mm Depth of draw 130 / 130 mm Kfodpfxottlzfe Ah Uoa Max material width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Maximum cycles-minute 45 Forming pressure 7 bar All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: used, mileage: 96,000 km, power: 132 kW (179.47 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 5,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, spoiler, tail-lift, General information Year of manufacture: 2019 Technical information Number of cylinders: 4 Engine capacity: 2.998 cc Front axle: Max. axle load: 2500 kg; Tyre profile left: 60%; Tyre profile right: 60%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 5350 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80%; Suspension: air suspension Kedpexz Dhrjfx Ah Usfa Measures Dimensions (LxW): 860 x 255 cm Weights Empty weight: 3.993 kg Carrying capacity: 3.207 kg GVW: 7.200 kg Functional Tail lift: Dhollandia, tail lift, 1000 kg

Year of construction: 2022, condition: excellent (used), White Type: T/800/70/10 Water-cooled External dimensions (HxWxD): 2085 x 1415 x 2810mm Test room dimensions (HxWxD): 950 x 1100x 800 mm Volume: 800 liters Minimum temperature: -72 °C Maximum temperature: +180 °C Temperature change rate, cooling: 12.0 K/min Temperature change rate, heating: 12.0 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Temperature gradient: ≤2.0 K Heat compensation, at +20 °C: 8000 W Power connection 3/N/PE AC 400 V ±10% 50 Hz or 3/N/PE AC 440 V ±10% 60 Hz Rated power: 30 KW Rated current: 57 A Operating hours: approx. 10 (never used) Condition: used Weight 1600 kg Scope of delivery: (See picture) Sold ex location! Ksdsvxrwgjpfx Ah Uefa (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.