Used Exeron Hsc 300/3 for sale (68,723)

Condition: used, Manufacturer: Hylatechnik Paul Chrubasik GmbH Type: HSSP 300-3-XA4 Machine type: Hydraulic press Year of manufacture: 2000 Njdpfozrz D Ssx Abujlh Condition: used Press force: 3,000 kN Press force: 300 t Stroke: 300 mm Maximum installation height: 800 mm Table area: 2,000 × 1,550 mm Ram area: 2,000 × 1,540 mm Front opening: 2,000 mm Side opening: 1,050 mm Table height: 800 mm Rapid traverse: 340 mm/s Working speed 1: 32.5 mm/s Working speed 2: 19.5 mm/s Retraction: 340 mm/s Maximum working pressure: 280 bar Drive power: 75 kW Power supply: 400 V Frequency: 50 Hz Machine weight: approx. 38,500 kg Hydraulic oil tank: approx. 2,000 l Pulling cushion: no Equipment: Complete DREHER strip system DREHER strip unwinder DREHER strip feeder DREHER strip conveyor system Hydraulic die cushion with parallel movement Hydraulic roll blocks Tool changing consoles Siemens SIMATIC control panel Note: The system is currently running at a slow speed but has no significant damage. We will gladly send you videos of the machine in operation upon request.

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR300 5AX. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, Renishaw probing, 30 Station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. Nodpfx Abjzzax Touolh SPECIFICATION: TRAVELS: X Axis 410 mm, Y Axis 610 mm, Z Axis 500 mm A Axis +30° to -120°, C Axis Continuous 360° TABLE: Diameter 300 mm Max Swing Diameter 300 mm, Max Weight on Table (evenly distributed) 100 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 FEEDRATES: Rapid and Jog (Max.) 36 m/min Cutting Feed Rate (Max.) 20 m/min Rotary Axis Speed 25 rpm BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Through Spindle Coolant Coolant Flow Rate at Cutter 160 L/min Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X410 Y610 Z610 mm A360| 12000RPM | BT40 Accessories: 5 axis Table, Renishaw Probing, Side Mount Tool Changer, Swarf conveyor

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2,110 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 12 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions 5 pallet positions 320x320mm Operating hours: 2110 h Technical data: Travel paths: 455x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance between table/electrode holder: 150/450mm Max. workpiece weight: 800 kg Maximum dielectric volume: 700 liters Dimensions (W x D x H): 2160x2000x2610mm Machine weight: 2500 kg Nlsdpfxoxlchfe Abujh Power connection: 3/N/PE 400/230V 50Hz Power consumption: 6.7 kVA Equipment: Color: light grey MF30 V3.2 operator interface Touch screen display Exogen generator 60A Direct measuring system on all axes Cartridge filter Integrated cooling unit CO₂ extinguishing system C-axis 100/min with holding brake Handheld control unit with enabling button Lowerable tank, automatic positioning Erowa chuck 12-month warranty Transport On-site commissioning Training

Condition: excellent (used), Year of construction: 2001, Boiler Vitoplex 300 130Kw Used Year: 2001 Type: TX3 Output: 130Kw Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. Nodpetu Txhefx Abuelh The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: used, Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, travel distance X-axis: 905 mm, travel distance Y-axis: 705 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 3,000 kg, total height: 3,400 mm, total width: 2,100 mm, total length: 3,425 mm, table width: 850 mm, quill stroke: 710 mm, type of input current: three-phase, distance table to quill: 250 mm, table length: 1,150 mm, warranty duration: 6 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 7,500 kg, year of last overhaul: 2026, table load: 3,000 kg, input frequency: 50 Hz, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 15 m/min, Equipment: documentation/manual, EDM314MF30 + AWEX50/5 MF30 control panel Year of manufacture: 2020 Operating hours: 4800 h Overhauled Travel ranges XxYxZ: 905/1020 x 705 x 455 mm Work table: 1150 x 850 mm (steel table with T-slots) Work tank: 1200 x 900 mm Nodoyt Ewgopfx Abuolh Filling level of work tank: 500 mm Electrode weight, max.: 50/500 kg Workpiece weight: 3000 kg Machine weight: 7500 kg Machine dimensions (W x D x H): 2100 x 3425 x 3450 mm Equipment: Color: Light/Teal gray Tool changer: 30-position, in-machine Automation: AWEX50/5 50 electrode positions 5 pallets UPC 320x320 Cartridge filter system Quick-change chuck EROWA/3R-Macro C-axis: 100 rpm, direct measurement 0.0001 degrees Holding brake in C-axis CO2 extinguishing system K&B Fire protection flap Smoke extraction with activated carbon filter Cooling unit integrated in the machine Manual control panel Automatic tank refill Erosion generator: 60 A Option with booster stage for 120 A erosion power Transportation On-site commissioning Training

Condition: ready for operation (used), Year of construction: 1997, operating hours: 19,000 h, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 480 mm, controller manufacturer: MATSUURA, controller model: G-Tech 18i, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 80, number of axes: 3, This 3-axis Matsuura H.PLUS-300 was manufactured in 1997. It features a maximum spindle speed of 15,000 rpm and impressive travels of 500 mm in both the X and Y axes, with a Z-axis travel of 480 mm. The machine is equipped with an automatic tool changer that holds 80 tools and includes coolant in the spindle. If you are looking to get high-quality machining capabilities, consider the Matsuura H.PLUS-300 horizontal machining centre. Contact us for further details. • Through-spindle coolant • Tool setter Technical Specification Nljdpjz Tzrwjfx Abujh Taper Size ISO 40

Condition: used, Year of construction: 2005, FANUC 160 I-MB control Nedofxgiyepfx Abuelh KNOLL chip conveyor, type 1200 S-2, made in 2012 4 workstations

Condition: used, Year of construction: 2022, Miter bandsaw machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 CNC-G Machine No.: 3000614217F - workshop-tested Year of manufacture: 2022 Cutting range (round): 300 mm Cutting speed: 20-100 m/min, continuously variable Standard equipment includes: - Angle display on the screen - Cutting feeler - Swiveling control panel - Hydraulically controlled clamping vises - Swiveling cutting gap during miter adjustment - Material feed via ball screw - BRP saw band monitoring - Chip removal brush - Coolant system - Operating manual Nlodpfx Aj Aav Ryjbuoh Used, as is, no warranty The machine technically complies with current safety regulations.

Condition: good (used), Year of construction: 2024, Welding rotary table KT 300 Load capacity, horizontal: 300 kg, tilted: 150 kg Power consumption: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 0.3 – 2.5 RPM Includes foot-operated remote control Additional cost: Quick-release chuck Diameter: 300 mm, €450 Nlodpfx Absbvk I Eoueh

Condition: used, Year of construction: 2012, Dust collector JP 300-L with briquetting press CS 3-12-R Year of manufacture: 2012 Equipment: Nlsdpfxjz Rrbks Abueh Dust collector Briquetting press Technical data: Vacumobil JP 300: Nominal volumetric flow rate: 5100 m3/h Maximum volumetric flow rate: 6000 m3/h Pressure difference at nominal volumetric flow rate: 2700 Pa Pressure difference at maximum volumetric flow rate: 2200 Pa Filter area: 28.0 m2 Suction nozzle: 300 mm Nozzle height: 1215 mm (center) Fan motor: 7.5 kW On-site fuse protection: 32 A Compressed air connection: 1" Operating pressure: 4.5 bar Compressed air consumption: approx. 120 NL per pressure pulse with a pulse duration of 150 ms Sound pressure level: 75.0 dB Weight: 900 kg Briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m3/h (material-dependent) Hydraulic pump motor: 3.0 kW Mixer motor: 0.37 kW Metering screw motor: 0.75 kW On-site fuse protection: 16A Briquet diameter: 65 mm Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Location: NRW (North Rhine-Westphalia) Availability: approx. June/July 2027

Condition: used, machine/vehicle number: 008157, Position 1: Brushing Machines GIARDINA-1VE - 300 Nedpfx Absw Sdu Usujlh Position 2: Sprayers GIARDINA-1VE - 300 Position 3: Panel Feeding and Loading GIARDINA-1VE - 300

Condition: excellent (used), For sale: a professional Telestream PRISM MPS-300, designed for monitoring, analyzing, and controlling SDI/IP video signals in broadcast applications and professional AV systems. The unit has been inspected and is in working condition. It powers on correctly, and the touchscreen functions properly. The condition of the unit is visible in the photos. The photos show, among other things, a functioning 12G UHD SDI generator during testing – 3840 × 2160 / 59.94 Hz. Model: Telestream PRISM MPS-300 Serial number: MPS-300 S011149 Software version: 3.5.2 Selected connectors and features: SDI inputs: SDI1 / SDI2 SDI I/O: SDI3 / SDI4 10/25GE interface REF IN / REF OUT Nedpfxjz Snx Uj Abuelh AUX OUT DisplayPort GPIO Ethernet LAN USB Headphone output Support for professional UHD/12G SDI signals Built-in touchscreen Portable design with handle Power supply: 100–240 V AC, 50/60 Hz. The set also includes the professional RF/SDI cables shown in the photos, including Amphenol RF cables. The equipment comes from a professional application. The housing may have normal signs of use and storage. The scope of sale is exactly as shown in the photos.

Condition: as good as new (ex-display), Year of construction: 2025, Manual operation Temperature control via a digital thermostat. DIMENSIONS Nsdpfx Asf Hqayobuelh External dimensions: 1490 x 900 x 970 mm Internal dimensions of the cleaning tank: 900 x 600 x 640 mm Usable working dimensions: 870 x 525 x 400 mm Operating height: 970 mm Capacity of the cleaning tank: 351 l Material: Stainless steel. Thermoacoustic insulation: 50 mm ULTRASONIC Transducer: Piezoelectric Ultrasonic power: 4 kW Ultrasonic frequency: 28 kHz Frequency sweep: Yes Power regulation: 16 positions Heater: 7.5 kW Lid: Manual Drain valve ("): 1 ¼ " Touchscreen: 4.3 " Heater timer: Yes

Condition: excellent (used), Ref: MM6323 ROKK Processing Ltd continuous freezer supplied with control unit. Manufacturer: ROKK Processing Ltd. Model - RFE 300. Date of manufacture - 2024. Freon gas - R404A. Ideal for use in small laboratories up to large factories. Limited use over the 16 months since installation. Nljdpfxeydlg Ae Abuoh Control unit: 1 x ROKK Processing Ltd Control Unit. Manufacturer: ROKK Processing Ltd Model: SP40BC Capacity - 100 to 300 liters per hour Calibrated to BRC standard 3 Phase power Fixed and flexi hose dispensing options Pipes for connection to pasteuriser included Various spare parts included Overall dimensions - 1100mm long x 730mm wide x 1620mm high. Weight - 550 kg. The spray arm at the top of the machine (blue) can be detached for shipping.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 21977-1964, Offer 26165 Technical Data - Two driven rollers, each hydraulically adjustable - For edging and conical rolling - Operation via a separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without edging - at bending diameter 370 mm, inside 30 mm - with edging at bending diameter 370 mm, inside 25 mm Nlodpfxszf Hkde Abuoh - without edging at bending diameter 380 mm, inside and - width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Space requirement W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Condition: used, Used Bibby approximately 300 litre capacity 316 stainless steel vertical mixing vessel. Unit has welded dished top and bottom heads. Internal rated 3.48 bar/full vacuum design pressure at 100 deg.c. Unit has top entry off-site stainless steel agitator driven by Lightnin model LS25A air operated drive. Unit is mounted on (4) stainless steel legs. Specifications: Capacity: 300 L Type of Stainless: 316 Stainless Steel Internal Pressure [Y/N]: Yes Mixer/Agitator [Y/N]: Yes Tank Bottom: Dish Vertical/Horizontal: Vertical Nlodoygvl Uopfx Abuoh Legs/Lugs/Skirt/Saddle: Legs

Condition: good (used), Year of construction: 2021, overall weight: 770 kg, We are offering this well-maintained Holms PH/300-3 hydraulic sweeper brush, with a large BM connection (suitable for, among others, Volvo L120), manufactured in 2021. Manufacturer: Holms Model: PH/300-3 Nodpfx Aboz Rnaioujlh Year of manufacture: 2021 Condition: good Category ID: 287 Type ID: 3445 Type: Hydraulic sweeper brush If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, workpiece height (max.): 100 mm, workpiece width (max.): 1,300 mm, Workpiece height – max. 100 mm Njdj Aaxuzjpfx Abuolh Workpiece width – max. 1300 mm Feed rate 0.4 – 2.6 m/min Number of spindles 6 pcs Spindle length 6 x 350 mm Total power consumption 7.5 kW Machine weight approx. 2.3 t Space requirement approx. 2.07 x 2.3 x 2.21 m Additional information Includes a circulating conveyor system for workpiece carriers and an extraction/filtration system.

Condition: used, Year of construction: 2002, functionality: fully functional, Manufacturer: KraussMaffei Type: KM 300-1400 C2 Machine type: Injection molding machine Year of manufacture: 2002 Machine no.: 254603 Machine weight: 12,500 kg Clamping force: 3,000 kN Control system: KraussMaffei machine control system with screen operation Operating hours according to display: 96,208 h Material supply: Material conveying/dosing components installed on the machine Hydraulics: Rexroth components visible Peripheral control: RMS Systems Touch Control available Conveying technology: Discharge/conveyor belt available Cooling unit 1: Frigel RCM80/6HP Nlodpfoz Alpgex Abuoh Year of manufacture, cooling unit 1: 2012 Voltage, cooling unit 1: 400 V Max. current, cooling unit 1: 17 A Refrigerant, cooling unit 1: R407C Refrigerant charge, cooling unit 1: 2.4 kg Weight, cooling unit 1: 200 kg Cooling unit 2: Frigel RCD80/12HP Year of manufacture, cooling unit 2: 2013 Voltage, cooling unit 2: 400 V Max. current, cooling unit 2: 29 A Refrigerant, cooling unit 2: R407C Refrigerant charge, cooling unit 2: 2.4 kg Weight, cooling unit 2: 240 kg Location: Freiburg Available from APRIL 2027

Condition: excellent (used), Year of construction: 2020, Ref:11151 . 2020 Horizon HT-300 iCE Trimmer LIKE NEW - ONLY 980 BOOKS TRIMMED! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Designed for either offline operation or inline connection to Horizon perfect binders. Comprising: Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Nlsdpfez Elvpjx Abujh Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Corner trimming capability Including knives, tools and accessories. Specification: Maximum speed: 300 cycles/hour Stack production: Up to approx. 590 books/hour depending on feed/configuration Maximum untrimmed size: Up to 350 × 350 mm, depending on table/configuration Minimum untrimmed size: Down to 152 × 107 mm with A6 Table K Maximum trim width: 99.9 mm Minimum trim width: 2 mm (0 mm/no cut can also be selected) Book/stack thickness: 1–51 mm Pressing force: 1–7 kN, servo controlled Machine dimensions : Approx. 2,406 × 1,280 × 1,550 mm W × D × H Operation: Fully automatic setup Workflow: iCE LiNK / JDF compatible

Year of construction: 2022, condition: ready for operation (used), overall weight: 1,140 kg, Plastic processing machine manufactured in 2022. This Other AMIS GSE 300/600 features a rotor diameter of 300 mm and a rotor width of 600 mm, designed for high-speed recycling of plastic waste. It has a feed opening of 400 x 590 mm and a throughput rate of approximately 150 – 250 kg/h, depending on material type. If you are looking to get high-quality plastic recycling capabilities, consider the Other AMIS GSE 300/600 machine we have for sale. Contact us for further details. Nlodpfez E R Rxex Abuoh • Rotor diameter: 300 mm • Rotor width: 600 mm (actual cutting length: 590 mm) • Drive capacity (motor): 11 kW or 15 kW (depending on application) • Feed opening: 400 x 590 mm • Throughput rate: Approx. 150–250 kg/h (material and screen size dependent) • Rotor knives: 3 rows, V-cut geometry (3 x 2 segmented knives) • Stator knives: 2 rows, reversible with dual cutting edges • Standard screen mesh: > 6 mm (interchangeable; multiple sizes available)

Condition: ready for operation (used), Year of construction: 1998, Available immediately, ex works: Vertical CNC machining center, SW Schwäbische Werkzeugmaschinen Type BA 35 300 Year of manufacture: 1998 CNC control: Siemens 840 D Travel distances X/Y/Z: 2650/500/500 mm Swinging operation possible: 2 x 750 mm Spindle: 17 kW Tool holder: SK 40 Chain magazine: 36 positions Spindle speeds up to 10,000 rpm Chip conveyor Weight: 9 tons Nljdpfx As Adnwasbueh Price: EUR 6,500.00 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 232597, functionality: fully functional, cutting height (max.): 320 mm, overall weight: 2,100 kg, controller model: Siemens Simatic HMI, throat depth: 370 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from November 16, 2026, to November 26, 2026! TECHNICAL DETAILS Belt length: 5,080 mm Nsdpfx Aboz Ilvzsujlh Belt speed: 250–2,000 m/min Maximum cutting height: 320 mm Overhang: 370 mm Guide rod, hydraulic lift: 200 mm Belt tension, hydraulic lift: 60 mm Material support height: 1,200 mm Roller diameter: 630 mm MACHINE DETAILS Control: Siemens Simatic HMI Operating voltage: 400 V Rated current: 32 A Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,500 x 2,700 mm Weight: 2,100 kg EQUIPMENT Roller conveyor (roller conveyor width: 350 mm) External reference: Heraeus

Condition: excellent (used), Year of construction: 2010, control type: CNC control, actuation type: hydraulic, controller manufacturer: Beckhof, number of rollers: 4, roller (bottom) diameter: 1,450 mm, roller (top) diameter: 1,500 mm, side roll diameter: 1,100 mm, sheet thickness (max.): 300 mm, overall weight: 802,000 kg, total length: 15,000 mm, total width: 7,200 mm, total height: 7,800 mm, 4 roll plate bender HAEUSLER - VRM-HY 3600/300mm MACH-ID 9870 Make: HAEUSLER Type: VRM-HY 3600/300 Control: BECKHOF YOP: 2010 WORLDWIDE UNIQUE OPPORTUNITY – ONE OF THE LARGEST AND MOST POWERFUL 4-ROLL PLATE BENDING MACHINES EVER BUILT BY HAEUSLER 3600 x 300 mm Mach4Metal is proud to announce the acquisition of one of the largest and most powerful 4-roll plate bending machines ever manufactured by HAEUSLER, Switzerland. Only two identical machines of this exceptional size and capacity were ever built. The second machine is installed at Dillinger Hütte in Germany. With a total weight exceeding 800 tonnes, an extraordinary pressing force of more than 7,000 tonnes from the lower roll against the upper roll, and a plate rolling capacity of up to 300 mm thickness, this machine represents the highest level of heavy-duty plate forming technology. A RARE OPPORTUNITY FOR MANUFACTURERS OPERATING IN THE WORLD'S MOST DEMANDING INDUSTRIES. This extraordinary machine is particularly suitable for manufacturers specialising in: Nuclear energy – Small Modular Reactors (SMR) and Advanced Modular Reactors (AMR) Nuclear reactor pressure vessel components Heavy-wall pressure vessels and high-pressure systems Heavy industrial components requiring extreme plate thickness and forming forces Machines of this size and capacity are extremely rare on the worldwide market. Engineering and manufacturing a comparable new machine would require a substantial investment and a significant delivery period. Mach4Metal offers the opportunity to acquire this remarkable machine with immediate availability. For companies planning to expand their production capabilities in nuclear energy, power generation, offshore construction or heavy pressure vessel manufacturing, this could be a once-in-a-generation investment opportunity. If your company is active in SMR/AMR technology, nuclear power generation, pressure vessel manufacturing, heavy boiler production or offshore fabrication, we invite you to contact Mach4Metal. ONE OF ONLY TWO IDENTICAL MACHINES EVER BUILT. EXCEPTIONAL CAPACITY. IMMEDIATE AVAILABILITY. WORLDWIDE DELIVERY. Rolling CANS, VESSELS, BOILERS Components for SMR / AMR steam drums, high-pressure systems Small Modular Reactors and Advanced Modular reactors  Power generation sector; Offshore Market Rolling width 3650mm Rolling thickness 3x toproll Ø:250mm Rolling thickness 5x toproll Ø:300mm Rolling thickness prebending: 270mm Top Roll Ø: 1500mm Bottom Roll Ø: 1450mm Side roll Ø: 1100mm Number of rolls: 4 Rolling speed: 1,2 + 2,4 + 3,6 M/Min Number of driven rolls: 2 Power: 700kW Length: 15000mm Nsdpfe Ad Uk Tex Abujlh Width: 7200mm Height: 7800mm Weight: 802000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. Nlsdpfx Ae Afgx Sobujh - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.