Year of construction: 2007, Condition: ready for operation (used), Elumatec SBZ 130 - 8.5m 3-axis profile machining centre Type RBF 8 from Year 2007 with 8 head automatic tool changer, with tooling as shown Max machining length with profile end machining 8,380mm Automatic clamp positioning with Sick M4000 light guards, Angle routing heads, High-speed spindle, Slow spindle and Collets. with eluCam on the operating panel. Machine can be viewed in full working order Located in West Bromwich Buyer to dismantle, assistance can be given to load. Cgjln S A Howgkw Tjret

Year of construction: 2005, operating hours: 1,000 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 401, This machine has got very little use as it was used as a backup saw. It has been taken out of the production line as we needed the space for a new Schirmer machining center. This Rapid DGL functions as new and is ready for shipment if sold. We have the necessary equipment required to load onto a truck if required. Cgeln Sewgygwe A Hret

Year of construction: 2007, Condition: used, Max. machining length: 2,600 mm Y-axis travel: 315 mm Z-axis travel: 230 mm Milling spindle speed infinitely adjustable between 2,800 and 12,000 rpm Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping Cgeln Sjlp Uz Ae A Hrst X and Y-axis CNC controlled, Z-axis continuously lowerable by motor 4 pneumatic material clamps Manual tool change Minimum quantity spray device USB port operation manual Accessories as per photo

Year of construction: 2010, Condition: excellent (used), Functionality: fully functional, Application type: Milling Machine type: Vertical machining center. Technical specifications - Elumatec SBZ 122/64 Width: 8450 mm Depth: 3400 mm Height: 2560 mm Weight: 3400 kg Control unit replaced in 2023 Main CNC language: German Customizable CNC language: Yes. Main Drive Number of Cycles: 1 Spindle Speed Range: 24,000 RPM Power: 21 kW Movement X-Axis Movement: 6700 mm Y-Axis Movement: 350 mm Z-Axis Movement: 280 mm Work Table Outer Length: 6700 mm Number of T-Slots: 2 Csljwfrhqjn S A Hrsgt Available Tool Slots: 10 Max. Tool Weight: 4 kg Max. Tool Diameter: 80 mm Max. Turret Length: 200 mm Main Power Supply: 400 V Total Power Requirements: 30 kVA. The machining center has two stops and can therefore be double-loaded or handle profiles up to 6.5 m long. It has two tool magazines and an angle head. The machine can be inspected while powered.

Condition: excellent (used), Year of construction: 2020, Functionality: not functional, machine/vehicle number: 222100410, milling height: 150 mm, spindle diameter: 280 mm, milling length: 400 mm, milling spindle speed (max.): 2,800 rpm, No reserve price - guaranteed sale at the highest bid! For milling transom and door profiles made of aluminum and PVC TECHNICAL DETAILS Milling height: max. 150 mm Milling depth: max. 110 mm Milling length: max. 400 mm Csln S A Howgb U Njrjgt Profile height: max. 200 mm Milling cutter diameter: max. 280 mm Material stop swivel range: up to 60° to the right and left Drive Milling motor: 2.5 kW Speed: 2,800 rpm MACHINE DETAILS Maintenance has been performed by the manufacturer

Year of construction: 2011, Condition: good (used), Roller belt left: 400 cm, roller belt right: 600 cm. Csln S Aswdui Is Hrjgt

Year of construction: 2023, Condition: excellent (used), Available: august 2025 Machine from right to left usefull length 7600 mm max section profile: 320 x 160 / 160 x 320 mm Cgeln S Aewbdp Ss Hrjt Rotary base with 8 spindles Cutting unit pivoting 22.5° - 157.5° Cutting unit tilting 45° to 135° (vertical) combined notching chips and waste conveyor Camerasystem Restpiece measurement system

Year of construction: 1984, Condition: used, Corner connector machinePressta 7000 type PV 7 Celnei Dx A Eo S A Hrjgt

Year of construction: 1995, Condition: used, Max. sawing length: 6,000 mm Max. saw blade diameter: 500 mm Automatic positioning via diamond control of length and angles Angles can be swiveled inwards and outwards (20-135°) Moving roller conveyor Soundproof cabin Cgoln S Aov Ip T Do Hrjt Minimum quantity spray device chip conveyor belt Weight: approx. 2,800 kg

Year of construction: 2011, Condition: excellent (used), Functionality: fully functional, 4-axis milling machine 8 pneumatic clamps with automatic positioning automatic toolchange 8 tools Dynamic pendular usefull lenght 7700 mm Cslnewaa Uue S A Hrogt

Year of construction: 1984, Condition: used, Copy router Rotox Cjln S Aeillylo Hrsgt Type KF 257

Year of construction: 2009, Condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Csln S Aeqzmnue Hregt Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Machine was in operation until dismantling Further technical data on request or see photos

Year of construction: 1998, Condition: used, Max. saw blade diameter: 250 mm Celnowf Ilrj S A Hrjgt Manual material tensioner

Year of construction: 2009, Condition: used, 3-axis machining center with automatic 8-way tool changer for aluminum, PVC or steel profiles Max. processing length: 7200 mm Max. travel Y-axis: 480 mm Max. travel Z-axis: 325 mm Windows control with Elusoft dongle Cgjln S A Hou T Nm Noret Speed infinitely adjustable up to 6,000 rpm minimum quantity spraying 2 angle heads, one rotatable 1 slow-speed spindle for steel profiles clamp detection and displacement 8 pneumatic material clamps Pendulum operation possible through 2 light barrier areas Loading included in the price Weight: approx. 5,000 kg

Year of construction: 2002, Condition: used, Vertical milling head: Longitudinal stroke: 2150 mm Transverse stroke: 230 mm Vertical stroke: 210 mm Horizontal milling head: Longitudinal stroke: 265 mm Transverse stroke: 280 mm Vertical stroke: 105 mm Spindle speed: 12,000 rpm Pneumatic workpiece clamping Minimum quantity spray device Cjln S A Hjwcf R Hsrjgt Pneumatic copy bolts on both units

Year of construction: 2014, Condition: used, Max. punching force: 50 kN Celn S Aewb Euco Hrogt Stroke activation via foot switch

Year of construction: 1998, Condition: used, Max. saw blade diameter: 450 mm Saw head can be swiveled on both sides with pneumatic brake Manual feed Coln S A Howb Er Ujrsgt minimum quantity spraying

Year of construction: 1999, Condition: used, Max. sawing length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of the length as well as motorized angle adjustment inwards and outwards Moving roller conveyor Material support Minimum quantity spray device Colnewb Eq Ro S A Hrogt Weight: 1800 kg

Year of construction: 2005, Condition: used, Max. saw blade diameter: 400 mm Saw table can be swiveled on both sides Cgeln S A Howb Eqqorot Pneumatic feed via 2-hand operation minimum quantity spraying Saw blade speed: 3,500 rpm

Year of construction: 1999, Condition: used, Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 12,000 revolutions per minute 4 pneumatically controllable copy pens Pneumatic material clamping Minimum quantity spray device Cgsln Sowb El Uj A Hrot Profile width: 30-120 mm Profile height: 50-100 mm Bar length: 490 - 3,000 mm Weight: about 350 kg

Year of construction: 2003, Condition: used, Max. sawing length: 7,500 mm Cjln S A Howb Elbsregt Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 550 control Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Moving roller conveyor Extraction on both units Total weight approx. 2400 kg

Condition: used, Year of construction: 2011, Max. pressing force: 350 kN Punching stroke: 12 mm Cgjln S Aewak T Is Hrot Abutment stroke: 120 mm Max. punching height 120 mm Digital display for the adjustment of the punching heads and the probe 450 kg

Condition: used, Year of construction: 2011, Max. pressing force: 350 kN Punching stroke: 12 mm Abutment stroke: 120 mm Csljwak T Usn S A Hregt Max. punching height 120 mm Digital display for the adjustment of the punching heads and the probe 450 kg

Year of construction: 2000, Condition: used, 5-axis machining center in very good condition, which can be tested by arrangement Max. processing length: 6,600 mm Y-axis travel: 800 mm Z-axis travel: 500 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 360° Max. Speed 24,000 rpm Cgolnoulz Ikj S A Hrot Spindle power: 7 kW Tool changer with 9 standard and 1 special tool (saw blade up to 250 mm) minimum quantity spraying Tensioner detection and automatic displacement 8 pneumatic material clamps Light barrier protection Manual control console Windows operating system Spindle in very good condition (approx. 6,600 spindle hours) Loading is included in the price Weight: approx. 6,500 kg

Condition: used, Year of construction: 1996, Hydropneumatic operation Celn S Aov S D Ike Hregt Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg