Used Fasti Fasti 109-25-8 for sale (46,827)

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Dwedpszvp Uysfx Al Ssc

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - motorized cutting angle adjustment - cutting gap adjustment by means of graduated adjusting screws - number of hydraulic clamping bars 14 pcs Dwodpfx Alehhc Ixe Sjc - motorized rear stop with positioning 10 - 1000 mm - number of strokes depending on cutting angle and cutting length 23 per minute - hydraulic drive 400 V / 7.5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - including: - sheet metal lifting with pneumatic assistance - front angle stop + support arms - electronic cutting depth adjustment - cutting line illumination - electric foot switch

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 10,000 kg, power: 264 kW (358.94 HP), input voltage: 400 V, 2 used Salmatec presses, type Maxima 840/125 LF Suitable for compressing sawdust, with forced feed. The presses are equipped with an automatic grease lubrication system for the rollers and main shaft bearings. Dwedpfx Alez I Tzxo Sjc In addition, there is a lifting beam on the press for changing rollers and dies. The motors are 132 kW and of the Hoyer brand, manufactured in 2016, IE3 efficiency class. The presses have always been maintained by Salmatec and have recently been fitted with refurbished rotors. Several rollers and dies are included with the presses. Interested or would you like more information? Please feel free to contact us for specifications, photos, and price.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Key Technical Specifications Year 2010 Feature Standard HFT 8025 Dedpfx Asyzy D Esl Sjwc Press Force 80 Tons (800 kN) Bending Length 2,500 mm Stroke Length 200 mm Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94-417-008, Offer 24356 Technical data: - max. material thickness at 40 kg/mm² strength 3 mm - Max. projection 500 mm - Working depth 430 mm - hydr. infeed of the top roller - Roller center distance 125 mm - Working speeds infinitely variable 3 to 15 m/min - Right + left rotation - Drive 400 V 1.5 / 2.5 kW - Space requirement approx. W 630 x H 1450 x D 1200 mm - Weight approx. 550 kg - with: - E - foot switch for top roller feed - E - foot switch for right - left rotation - Various roller sets - Stop apron Dodpfx Aet Sucnol Sowc

Condition: ready for operation (used), Year of construction: 1996, pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm ajustment speed 90.0 mm/sec working feed 10.0 mm/sec return speed 75.0 mm/sec stroke 140 mm dayligth 375 mm column arm 250 mm table width 90.0 mm work height max. ca. 950 mm Number of working hours 14.100 h total power requirement 13.5 kW weight 8500 kg range L-W-H 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours (!!) - in checked conditions - machinevideo - ?v=wtEBQ0UawQ8 Dwsdpfsxabk Iex Al Sjc Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left * 2D graphic programming & product display * Tool & program library - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) - Original operating instructions + control unit - Manufacturer's CE declaration

Condition: good (used), Year of construction: 1990, Offer 25210 Technical data: - Load capacity: 8,000 kg - Both axles steerable / all-wheel steering (knuckle steering) - Tow bar usable at both front and rear sides - Solid rubber tyres: 425 / 150 - 305 - Platform length approx.: 2,500 mm Dwjdpowwi R Hefx Al Soc - Platform width approx.: 1,250 mm - Platform height approx.: 500 mm - Total length without tow bar: 3,300 mm - Total length with tow bar approx.: 4,400 mm - Weight approx.: 700 kg

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,210 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,675 mm, fuel type: gas, mast type: triplex, construction height: 2,245 mm, fork length: 1,200 mm, empty load weight: 4,200 kg, total length: 2,700 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift Dwjdpfoxpy I Rox Al Ssc Load centre: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: very good Front tyres type: Superelastic Front tyres condition: 100% Rear tyres type: Superelastic Rear tyres condition: 100% Description: Factory-refurbished used unit by Toyota including new inspection and new acceptance in accordance with FEM (formerly UVV). Sideshift, 3rd valve, front working lights, roof cover, full free lift, CE certificate, scale,

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 10 m2 workspace, 4 m2 dressing area 16 x Filter Fan Units Dimensions: Length: 6,000 mm Width: 3,000 mm Clear height: 3,600 mm (adjustable depending on ceiling and installation space) Area: 14 m² Brecon BCPS cassette system: Panel thickness: 70 mm Maximum wall height: 6 meters Standard panel width: 1,200 mm Aluminum frame profiles Finish: 0.6 mm coated steel or 3 mm HPL (RAL 9010) Flush-finished seams with cleanroom sealant. Ceiling Brecon BCPS system ceiling: Panel thickness: 50 mm Walkable ceiling option Load-bearing capacity up to 150 kg/m² Suitable for integration of: HEPA filter units (FFU) LED cleanroom lighting Dsdpfszgcy Dsx Al Sewc Air diffusers Utilities (data, electrical, gases) Chemically resistant ETP rubber Flat, cleanable design Optional with access control or interlock. Air handling Depending on desired classification: ISO 8 (production, assembly, packaging) ISO 7 (pharmaceutical, medical devices, precision engineering) GMP C/D possible, depending on the installation concept. Indicative bill of materials Component Specification Walls BCPS 70 mm panels Ceiling BCPS 50 mm system ceiling Doors 1–2 cleanroom doors Height 3,600 mm, adjustable in height

Condition: used, Year of construction: 2018, overall weight: 600 kg, load capacity: 10 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Dwodpfx Aez Hfl Hel Ssc

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg Djdpjzqam Aefx Al Sewc For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Condition: used, machine/vehicle number: 007277, Max. panel width: 800 mm Max. panel length: 2500 mm Dedpfet H Tynsx Al Sowc Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg

Condition: used, machine/vehicle number: 007275, Max. panel width: 800 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg Dodjt H Tvvepfx Al Sswc

Condition: used, machine/vehicle number: 007276, Max. panel width: 800 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg Dwodst H Tx Djpfx Al Ssc

Condition: used, machine/vehicle number: 007278, Max. panel width: 800 mm Dwedpst H Txqjfx Al Sec Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, operating hours: 70,104 h, pressing force: 81 t, total length: 3,100 mm, total width: 2,180 mm, total height: 2,540 mm, overall weight: 5,750 kg, working width: 2,550 mm, Equipment: emergency stop, We offer this ready-to-use Amada HFBO 80-25 press brake, year of manufacture 1999. If you have any questions or need further information, please feel free to send us a message or give us a call. Dsdpfx Aley H Eqbj Sewc The seller accepts no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2016, Machine No. 14, Serial No. 238835, Arburg Selogica control system, clamping force 2,500 kN, screw diameter 45 mm, handling system, manufacturer Arburg, type Multilift Select, year of manufacture 2016, travel distances X/Y/Z 700 x 1,200 x 2,400 mm, safety enclosure, handling robot, manufacturer Kuka, type KR10R1100, year of manufacture 2016, serial no. FA2686, 2 conveyor belts, manufacturer Schuma, L/W approx. 2,000 x 800 mm. Dedpez H N H Iofx Al Sswc

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, - Stack length: 2500 mm - Stack width: 800 mm - Max. stack height: 1650 mm (with pit) - Max. payload: 4500 kg - Motor drive roller conveyor: 0.37 kW - Motor drive stop ruler: 0.37 kW - Motor drive electrohydraulics: 2.2 kW - Dimensions: 2500 x 1900 x 2600 mm Dwedjw Ec Iuspfx Al Soc - Weight: 2600 kg

Condition: used, Max. sheet thickness: 3 mm steel Dsdpjy R S Eaofx Al Sswc Roller center distance: 125 mm Maximum projection: 500 mm Stepless speed adjustment via handwheel Right and left rotation Hydraulic delivery via foot switch Weight: approx. 550 kg Additional tool on request

Condition: excellent (used), Year of construction: 2016, Seydelmann AMR1800/250 mixer grinder with CO2. 1800 litre hopper with 250mm head. Excellent condition, very high specification machine. New cost in excess of EUR 300,000 We also have many other (22) Seydelmann machines from the same factory, all bought at the same time. Please ask for details. Dwedpex Alr Ijfx Al Ssc

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,480 h, load capacity: 2,500 kg, lifting height: 4,000 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,595 mm, fork length: 1,200 mm, empty load weight: 3,700 kg, total length: 2,640 mm, drive type: Treibgas, construction width: 1,150 mm, Internal combustion forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Technical condition: very good Front tire type: Superelastic Front tire condition: 100% Rear tire type: Superelastic Rear tire condition: 100% Description: Used unit, refurbished by Toyota, including a new inspection and new acceptance test according to FEM (formerly UVV). Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof cover, windshield, impulse control, CE certificate. Djdpszu Dr Rjfx Al Sowc

Condition: used, Year of construction: 2013, HELLER 7 Machines: H 6000 MCH 280 MCH 250 We offer, directly on behalf of the owner, the following machines due to a site relocation: 7 x HELLER 4-axis horizontal machining centers Manufacturer: Heller 1. Type: H 6000 Year of manufacture: 2011 Operating hours: 28,338 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 2-position Tool positions: 150 2. Type: H 6000 Year of manufacture: 2009 Operating hours: 33,963 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 2-position Tool positions: 165 3. Type: H 6000 Year of manufacture: 2013 Operating hours: 26,025 Control: Simumerik 840 D solution line Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 5-position Defect in spindle / B-axis 4. Type: MCH 280 Year of manufacture: 2011 Operating hours: 44,454 Control: Simumerik 840 D Travel X/Y/Z = 1,000 x 1,000 x 1,000 mm Pallet changer: 5-position Tool positions: 100 5. Type: MCH250 Year of manufacture: 2008 Operating hours: 49,905 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Dwsdpfez Ihpwox Al Soc Pallet changer: 2-position Tool positions: 100 6. Type: MCH250 Year of manufacture: 2008 Operating hours: 43,820 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 5-position Tool positions: 100 7. Type: MCH250 Year of manufacture: 2007 Operating hours: 58,084 Control: Simumerik 840 D Travel X/Y/Z = 800 x 800 x 800 mm Pallet changer: 2-position Tool positions: 100 The sale is without clamping devices and tool holders. Further details and technical information are available upon request.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,710 h, load capacity: 2,500 kg, lifting height: 3,700 mm, free lift: 1,600 mm, mast type: duplex, construction height: 2,300 mm, fork length: 1,200 mm, empty load weight: 5,000 kg, total length: 2,200 mm, construction width: 1,200 mm, Electric 4-wheel forklift Dwodpfx Asyrvbyjl Soc Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: normal Front tire type: Superelastic Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire condition: 0 - 20% Battery voltage: 80V Battery Ah: 500Ah Battery manufacturer: Kapatest, 85% capacity Battery year of manufacture: 2018 Description: Thorough cleaning, color refresh in orange, new front and rear tires in black, new seat cushion, new inspection, new certification according to FEM, battery regenerated. Side shifter, 3rd valve, 4th valve, rear work light, front work light, roof cover, windshield, heater, full cabin, impulse control, full free lift, CE certificate, safety light.

Year of construction: 2017, condition: ready for operation (used), overall weight: 380 kg, Turntable manufactured in 2017. This EXPERT EDX810/0250/8 is part of a system and has a machine weight of 380 kg. If you are looking to get a turntable, consider the EXPERT EDX810/0250/8 machine we have for sale. Contact us for further details. 4 units available Technical Data • Machine Type: Turntable • Indexing Angle: 8 × 45° • Index Time: 2.02 sec. • Transport Time: 1.79 sec. • Motor Voltage: 400 V • Motor Frequency: 50 Hz • Motor Power: 0.75 kW • Brake Voltage: 400 V Dodpfx Aez Ap Hvjl Sjwc • Braking Torque: 10 Nm • Operating Mode: SEW II.c • Dimension Sheet: A9681 • Noise Emission: < 75 dB(A) • Turntable / Drum Drive: Turntable configuration • Rotation Direction: Forward / Backward • Number of Speeds: 1 • Activation: Direct

Condition: not inspected (used), Year of construction: 2009, operating hours: 12,500 h, overall weight: 2,500 kg, power: 22 kW (29.91 HP), Used shredding machine designed as a twin-shaft shredder blade 30 mm drive 22 KW we currently have 4 used machines in stock with control system and partly installation frame and hopper. Dwedpfxsra A D Tj Al Sec