Lift Table

HOLZMA LIFTOMAT HAU-A-25/8

Condition: used, machine/vehicle number: 007276, Max. panel width: 800 mm Max. panel length: 2500 mm Lhedpfx Ahst H Tx De Ujr Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg

Condition: excellent (used), total width: 1,300 mm, total length: 3,500 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport width: 1,600 mm, transport height: 2,350 mm, transport length: 4,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Max. working pressure: 300 bar Lsdpfx Ahsxxpgbs Uohr Piston diameter: 80 mm Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, - Stack length: 2500 mm Ledpsw Ec Iuofx Ah Ushr - Stack width: 800 mm - Max. stack height: 1650 mm (with pit) - Max. payload: 4500 kg - Motor drive roller conveyor: 0.37 kW - Motor drive stop ruler: 0.37 kW - Motor drive electrohydraulics: 2.2 kW - Dimensions: 2500 x 1900 x 2600 mm - Weight: 2600 kg

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Lhjdevnq H Ejpfx Ah Ujr 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: like new (used), Year of construction: 2018, Costa sanding machine suitable for sanding veneer, 650 mm working width, with 5 rollers Lhodpfoxbh Agex Ah Usr

Condition: refurbished (used), Numerical Control Type Power Control Software No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 2 Drilling heads for each horizontal unit (1 x Kw 1,5) No. 11 Splindles for each horizontal drilling head Max. working width (mm) 3000 Min. working width (mm) 250 No. 6 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) Lodovhcbzepfx Ah Ushr N. 11 Spindles for each drilling head of the bottom vertical supports No. 2 Top vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each top vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the top vertical supports No. 6 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 50 / 60 (ca.)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, TECHNICAL DETAILS Type: Automatic cutting machine Longitudinal tools: 6 real + 6 virtual (multi-line processing) Cross tool: 1 piece Tool change: Automatic set-up Cardboard box infeed: Combi, suitable for single sheet and continuous cardboard box Web widths side by side: Two web widths can be alternated side by side Working height: 900 mm Zero edge: Left/right freely selectable Control panel: Right Workpiece parameters: Web width infeed: 350 - 1,500 mm Web width side by side: Total max. 1,350 mm Stacking height incl. pallet: 2,150 mm Pitch of continuous material: 1,150 mm Web length outfeed: min. 300 mm Cutting tolerance: Lengthwise: max. 0.5 % Transverse direction: max. ±2.0 mm Quality of the cardboard: Cardboard thickness: 2.0 - 7.0 mm (±0.2 mm) Raw material quality: Up to 2.30 BC according to DIN 55468 Processable cardboard qualities 1-wall: Thickness up to approx. 4 mm Processable cardboard qualities 2-wall: Thickness up to approx. 7 mm Cardboard types: FEFCO0403 Standard / FEFCO0410 Standard / FEFCO0429 Lid outside / FEFCO0900 Single MACHINE DETAILS Weight: approx. 2,000 kg Dimensions (WxDxH): approx. 3,450 x 2,400 x 3,700 mm Operating pressure: 6 bar Air consumption: approx. 20 - 100 NL/min (depending on cycle output and carton type) Operating voltage: 400 V, 50 Hz, 3 Ph./N/PE Connected load: 4.5 kW Rated current: 6.5 A Max. Back-up fuse: 16 A EQUIPMENT - Online database with performance indicator per carton design - Degree of perforation: Adjustable - Offset creasing: Available - Multiline processing: Possible - Carton designs: Rotatable (90° grid) - Carton designs: Mirrorable - Quality Plus Mode: Supported - Control: PLC control according to IEC 61131 - Industrial PC: Available - Operating system: Windows 7 32bit professional (US) - Memory: 1 hard disk permanently installed, 1 hard disk USB for data backup, Network: 2 x Ethernet 100 MBit - Interfaces: The machine is prepared for the use of tapio, for communication for digital products. - Free use: tapio MachineBoard app included (unlimited in time) - Software: IntelliCut machine control - Automatic carton production: According to production list (HOMAG CSV format) - Softkeys: For machine functions - Fault diagnosis: Available - Science program: Included - Display: Control panel with full HD multi-touch display - User interface: Standardized HOMAG user interface - Navigation: Simple, intuitive operation of the machine - Machine data recording MMR basic: For usage-dependent maintenance and display of key production figures (e.g. number of pieces, production time) - Control cabinet integrated in the machine - Machine installed in accordance with European standard EN 60204 Ljdpfov N Htkjx Ah Uehr - Machines are intended for in-house use

Condition: good (used), Year of construction: 1992, Mini tine cutter Hirsch type LQP 180 used For sawing For mini tines For countering For slotting Wood thickness min/max 50/80 mm Angle adjustment range +70/-70 degrees For cross processing of mini-joints and counter profiles. Changeover to +70/-70 degree bevel Length measurement at the stop, Wood clamping with bridge 8 bar Manual feed of the saw and milling carriage, safety circuit, electric brake system Wood thickness max. 80 mm Wood thickness min. 10 mm Lhedpjumk Dksfx Ah Usr Profile depth max. 50 mm Saw unit: Three-phase motor 2.2 kW Spindle speed 2800 rpm. horizontal adjustment 50 mm Milling unit: Three-phase motor 4 kW Spindle speed 6000 rpm. Spindle length 100 mm usable Spindle diameter 40 mm Tool diameter 180 mm Weight 850 kg Dimensions 1600 x 1450 mm

Condition: excellent (used), functionality: fully functional, Shelf length 3000 mm Shelf width 1300 mm Number of pistons 6 Lhjdpfx Aewl Eb Djh Usr Clearance - 470 mm Water heating Pneumatic side pressure Piston diameter - 80 mm Safety switch tear-off