Used Fieldbus for sale (71)

Condition: new, functionality: fully functional, !!! We have two pcs in stock. Price is for one pc only !!! Performance & Measurement • Measurement Principle: Thermal mass flow bypass sensor with a laminar flow element. • Flow Range (10K Sub-code): Configured for low to mid-range capacities, nominal 0.08 to 10 ln/min (up to 15 ln/min max depending on the specific gas calibration). • Accuracy: ±0.5% of Reading plus ±0.1% of Full Scale (standard for dry/clean gases). • Repeatability: < ±0.2% of Reading. • Settling Time: Standard 1 to 2 seconds. • Turndown Ratio: 1:50 in analog mode (digitally extendable up to 1:187.5). Mechanical & Environmental • Ingress Protection: IP65 dust-tight and water-jet proof rugged housing. • Pressure Rating: Up to 64 bar abs (PN64). • Operating Temperature: -10°C to +70°C. • Wetted Materials: Stainless steel 316L or equivalent. • Weight: 1.4 kg. Electrical & Communication • Power Supply: +15…24 Vdc (±10%). • Power Consumption: Max 320 mA (approx. 3.5 W typical at 24V). • Analog I/O: 0…5 (10) Vdc or 0 (4)…20 mA. • Digital Interfaces: Standard RS232 with configurable fieldbus options (e.g., PROFIBUS DP, DeviceNet, Modbus RTU, EtherCAT, PROFINET). Model code breakdown: Bedpfjz Hq Rbox Al Aoln • AGD: Represents the precise hardware configuration configuration, internal control valve size, and basic orifice profile. • 44: Specifies the primary electrical connection setup (typically an 8-pin DIN male connector for power/analog/RS232 plus secondary M12 fieldbus options optimized for IP65 environments). • V: Denotes Viton (FKM) internal elastomer seals and plunger materials. Brand new never used. Please check out our other listings as well.

Condition: used, Available quantity: 48 Bodpfx Aezm Iqbjl Aeln Manufacturer: Balluff Product type: Network module Model: BNI006C 1848HU Application area: Industrial automation Communication: Industrial Ethernet / Fieldbus Connection type: M12 Mounting type: Field mounting Protection class: IP67 Suitable for: Sensor and actuator connection

Condition: used, Available quantity: 10 units Used Balluff network module for industrial Ethernet and fieldbus applications. Manufacturer: Balluff Product type: Network module Model: BNI006C 1902HU Application area: Industrial automation Communication: Industrial Ethernet / Fieldbus Bsdpfx Aezmm H Isl Aoln Connection type: M12 Mounting type: Field mounting Protection class: IP67 Suitable for: Connecting sensors and actuators

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 1,126 kg, load capacity: 210 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA smartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 210 R2700-2 with KR C4 – NEW / 0 operating hours We offer a new and unused KUKA KR 210 R2700-2 industrial robot with KUKA KR C4 controller. Manufactured in 10/2021 with 0 operating hours. Robot specifications Model: KUKA KR 210 R2700-2 Payload: 210 kg Reach: 2701 mm Year of manufacture: 10/2021 Operating hours: 0 h / NEW Weight: 1126 kg Colour: RAL 7016 Cable set: INT 084ST2700 Controller KUKA KR C4 EU KSS 8.6 Bjdpfx Aljzyambe Asln Servo configuration SC4 400 V transformerless power supply Siemens SCALANCE X208 Interface X42 Ethernet interfaces X67.1–X67.3 24 V power interface X55 27 V power / USB interfaces X51 / X56 CSP 2x USB 3.0 Cabinet base with spacer Set of 75 mm rollers Installed KUKA software & technology packages KUKA.SafeOperation 3.5 KUKA.UserTech 4.0 KUKA.LoadDataDetermination 7.1 KUKA.GripperSpotTech 5.0 KUKA.RobotSensorInterface 4.1 KUKA.DeviceConnector KUKA.WorkVisual 6.0 KUKA.ActivationManagementTool The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: used, Available quantity: 7 pieces Used Balluff network module for industrial fieldbus and IO-Link systems. Manufacturer: Balluff Product type: Network module Model: BNI006C 1846HU Application area: Industrial automation Communication: Industrial Ethernet / Fieldbus Connection type: M12 Mounting type: Field mounting Bodozr T Upepfx Al Asln Protection class: IP67 Suitable for: Sensor and actuator connection Condition: used

Condition: used, Available quantity: 86 units Used Balluff network module for decentralized sensor/actuator communication. Bodpfx Asztbidol Aeln Manufacturer: Balluff Product type: Network module Model: BNI006C 1834HU Application area: Industrial automation Communication: Industrial Ethernet / Fieldbus Connection type: M12 Mounting type: Field mounting Protection rating: IP67 Suitable for: Sensor and actuator connection

Condition: used, Used Balluff fieldbus network module for industrial automation systems. Manufacturer: Balluff Product type: Network module Model: BNI006C 1845HU Application area: Industrial automation Blodpfx Ajzr T Ucol Ajn Communication: Industrial Ethernet / Fieldbus Connection type: M12 Mounting type: Field mounting Degree of protection: IP67 Suitable for: Sensor and actuator connection Condition: Used

Condition: used, Available: 2 units Used Balluff fieldbus module for industrial network and I/O applications. Manufacturer: Balluff Product type: Network module Model: BNI006C 1842HU Application area: Industrial automation Communication: Industrial Ethernet / Fieldbus Connection type: M12 Mounting type: Field mounting Blsdpszr Ucbefx Al Asn Protection rating: IP67 Suitable for: Connecting sensors and actuators Condition: used

Condition: used, Available quantity: 18 units Blsdpfx Aezm Izgsl Aon Used Balluff network module for industrial fieldbus communication and decentralized peripherals. Manufacturer: Balluff Product type: Network module Model: BNI006C 1847HU Application area: Industrial automation Communication: Industrial Ethernet / Fieldbus Connection type: M12 Mounting type: Field mounting Protection class: IP67 Suitable for: Sensor and actuator connection

Condition: used, Quantity: More than 10 available Used safety module / fieldbus module for industrial automation and PROFINET applications from Murr Elektronik. Manufacturer: Murr Elektronik Model: MVK-MPNIO F DI16/8 7/8" IRT Article number: 5556 Device type: Safety device / safety module Communication: PROFINET IO IRT-capable: Yes Digital inputs: 16 safe inputs / 8 channels Connection type: 7/8" connector Application area: Industrial automation technology Bsdpfx Ajzi Dx Hel Aeln Mounting type: Field mounting

Condition: used, Quantity: More than 10 available Used safety module / fieldbus module for industrial automation and PROFINET applications from Murr Elektronik. Manufacturer: Murr Elektronik Model: MVK-MPNIO F DI8/4 F DO4 7/8" IRT Article number: 5557 Device type: Safety device / safety module Communication: PROFINET IO IRT compatible: Yes Digital inputs: 8 safe inputs / 4 channels Digital outputs: 4 safe outputs Connection type: 7/8" connector Application area: Industrial automation technology Bodpfxozi Dy De Al Asln Mounting type: Field mounting Condition: Used

Condition: excellent (used), Year of construction: 2013, operating hours: 8,000 h, functionality: fully functional, overall weight: 5,000 kg, load capacity: 200 kg, arm reach: 3,000 mm, controller model: IRC5, input voltage: 400 V, input current: 32 A, type of input current: AC, ABB IRB 6650S 200/3.00 robot on ABB IRBT 6004 8 meter linear track. The robot has only 8000 working hours and it is fully functional. Robot can be seen at our facilities. If any additional options needed for the robot, like camera, we can add it. 644-2 German 840-2 Profibus Fieldbus Adapter 608-1 World Zones 611-1 Path Recovery 617-1 FlexPendant Interface 623-1 Multitasking RW Drive module 1 key ABB standard manipulator IRB 6600/6650 Axis 1 standard work range 6650S-200/3.0 No motor fan Drive System 09 4600/66x0/460/660/760 Additional drive ADU-790A in position X3 No drive in position Y3 RW Track Motion Type A Key Drive Module 1 IRBT 6004 Type A Standard carriage In line Bodpfsyk Aizex Al Aoln

Condition: used, Fieldbus gateway, Canopen Fieldbus gateway: for EnDat encoders Bedpfx Asdkqhfel Asln -Output signal: CANopen, DeviceNet or PROFIBUS DP protocol -to connect: from encoder to fieldbus -Signal converter: for encoders of the 600 series with EnDat interface -Protection class: IP 65 -Dimensions: 90/145/H30 mm -Weight: 0.38 kg

Condition: as good as new (ex-display), Engel Robot Drive, Robot Drive Module, Servo Drive Controller, Used Machine Manufacturer: Sigmatek (Engel) Model: Robotdrive M3-1 Year of Manufacture: 2018 Nominal Input Power: 4 kW Blsdpszmyrwsfx Al Ajn Communication Interface: EtherCAT (high-speed industrial fieldbus system) Mains Input: 3 × 380–480 V AC, 50/60 Hz Output Voltage: 560 VAC Output Frequency: 0–8000 Hz Nominal Output Current per Axis (at 45 °C): Axis 1: 5 / 10 A Axis 2: 10 / 20 A Axis 3: 10 / 20 A Overall Dimensions: Width: 390 mm Depth: 210 mm Height: 190 mm

Condition: new, Core Drive Specifications NXI: NX Inverter Unit. It is designed to be fed by a shared, common DC bus arrangement rather than direct AC mains input. 0072: 72 Amps Nominal Current Rating.Low Overload (Pumps/Fans): Continuous maximum output of 72 A. High Overload (Heavy Duty): Continuous maximum output of 61 A. 5: Mains Voltage Class. Rated for 380 V to 500 V AC grid systems (which corresponds to a DC bus voltage range of 465 V to 800 V DC). A: Includes the Standard Alpha-numeric Control Keypad. 5: IP54 (NEMA 12) Enclosure Class. This offers strong, dust-protected, splash-resistant defense for hash operational environments. T: Standard EMC Emission Level adhering to the IEC61800-3 specification for IT networks. 0: No integrated brake chopper. C: Physical frame generation / module sizing designated as Frame FR7. Blodpfx Asy Ud Afel Ajn Internal Hardware & Control Boards (SVA1AF00000) The suffix code segment details the exact internal logic, system software, and factory expansion board routing layout: S: Air-cooled design system. V: Internal coating option. It features varnished/coated circuit boards for moisture and corrosive air resilience. A: Standard Vacon System Interface architecture setup. 1AF00000: This sequence identifies the specific hardware configuration across the control expansion slots (A, B, C, D, and E):A1: OPT-A1 Basic I/O Board installed in Slot A. It provides 6 digital inputs, 1 digital output, 2 analog inputs, 1 analog output, +10V reference voltage, and a +24V auxiliary supply. AF: OPT-AF Dual Relay Output Board installed in Slot B. It provides 2 programmable changeover relay outputs (NO/NC configuration). 00000: Slots C, D, and E are left empty from the factory, giving you expansion headroom for fieldbus communications (such as Profinet or EtherCAT) if needed Brand new never used. Please check out our other listings as well.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: H18/X2090/202/00162, load capacity: 14 kg, arm reach: 1,000 mm, repeat accuracy: 0.03 mm, TECHNICAL DETAILS Load capacity: 14 kg Arm reach: 1,000 mm Repeatability: 0.03 mm Maximum rotation angle: 350° Maximum rotational speed: 16.8°/s Maximum linear speed: 0.6 m/s Platform positioning accuracy: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (without robot arm, W x D x H): 890 x 1,120 x 1,000 mm Total weight: 730 kg Power supply: 1 x 230 V / 16 A Battery capacity: 5.8 – 8.7 kWh Number of laser scanners: 3 Scan plane height: 150 mm Compressed air tank: 0.75 l / 7 bar Wrist protection rating: IP67 Arm protection rating: IP65 System protection rating: IP20 Average floor surface pressure max.: 10 N/mm² Drive type: Differential drive EQUIPMENT Tool parking station: 4 tools per station Tool changing system: MPS032 Navigation: based on laser scanner data Interfaces: WLAN, LAN, fieldbus Multi-coupling: compressed air, power supply, 2x Cat5e, 26 x 1 mm contacts Bodpfx Ajyzyxcel Ajln Optical and acoustic signals: 4 LED units, storage for up to 16 audio files

Condition: good (used), Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, input module -Manufacturer: ifm, Input module -Type: AL2401 -Number: 27 modules available Bledpexu Uvmofx Al Aen -Price: per piece -Dimensions: 165/60/H30 mm -Weight: 0.4 kg/pc.

Condition: good (used), Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, IO-Link input module Blodpfx Aexu Uwwol Asn -Manufacturer: ifm, IO-Link input module -Type: AL2400 -Number: 16 modules available -Price: per piece -Dimensions: 130/60/H30 mm -Weight: 0.3 kg/pc.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 8,000 mm, workpiece height (max.): 30 mm, workpiece weight (max.): 150 kg, TECHNICAL DETAILS Maximum plate length: 2,500 mm Maximum plate width: 8,000 mm Maximum plate thickness: 30 mm Maximum weight: 150 kg MACHINE DETAILS Tilting station transfer height: 680 mm Belt conveyor with lifting function for discharge: 40 mm Belt conveyor with lifting function for transfer to roller conveyor: 265 mm Roller conveyor and belt conveyor transfer height: 920 mm Conveying direction Lengthwise on roller conveyors Bledpfxjy Nbcxj Al Asn Crosswise on toothed belt conveyors Electrical Data Operating voltage: 400 V +N +PE - 50 Hz Control voltage: 24 V DC Brake voltage: 230 V AC Drive Technology Manufacturer: SEW Protection class: IP54 Quick-connect plug and hybrid cable on SEW fieldbus modules EQUIPMENT Sensors: Leuze Metalwork

Condition: new, Manufacturer: Balluff Condition: New, packaging only opened for the purpose of taking photos Type: PROFIBUS I/O module Model: BNIPBS-302-000-Z001 Order number: BNI000A Communication interface: PROFIBUS DP Digital inputs: 16 Digital outputs: 16 Bedpfx Alozcw Ebe Asln Sensor/actuator connection: M12 Protection rating: IP67 Design: Fieldbus module for decentralized installation Application area: Industrial automation technology Mounting type: Machine and system mounting Quantity available: 6 units

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band Bedpofg E Hyjfx Al Asln

Condition: good (used), Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS, Profibus-DP -Manufacturer: ifm electronic, Profibus-DP type AC 1305 -Controller: AS-i ControllerE 1MSTR 1RS232C 1DP -Number: 2x module available -Price per piece -Dimension: 105/85/H130 mm Bsdpfonbhk Njx Al Ajln -Weight: 0.6 kg/pc.

Condition: new, dimensions of saw-band 3650 x 27 x 0,9 mm speed 15 - 100 m/min vice 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round 260 / 200 mm capacity 45 degrees: square 250 / 180 mm capacity 45 degrees: flat 270 x 200 / 200 x 160 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170 x 170 mm total power requirement 2,2 kW weight 1.105 kg dimensions 2700 x 2300 x 1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient Bodpfx Asyv Nyljl Ajln and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Cylinder mounted servo valve. - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. - Bi-metal saw band for solid and profile material.

Condition: reconditioned (used), Year of construction: 2010, Motoman welding cell consisting of: 2x Motoman HP20, manufactured in 2010 2x SKS LSQ5 welding kits 1x Motoman positioning unit WG1000 2x torch cleaning stations 2x DX100 controller, master/slave configuration Motoman HP20 The HP20 robot is characterized by its versatility and high precision. Depending on the application, the path accuracy can be 0.1 mm. It features an anti-collision system for controlling multiple robots, which maximizes production. Due to its slim structure, it is suitable for work in small spaces and can be mounted on the floor, wall, or ceiling. Equipped with the DX100 controller. Features of the DX100 controller The compact DX100 controller from Yaskawa, with its advanced structure and process control, offers the user greater freedom even when designing an automated cell: • Multi-robot control system with up to 8 robots / 72 coordinated motion axes. • Robust PC architecture that enables the control of robot work cells at the system level. • Connections on the rear of the control cabinet to optimize internal space. • Built-in ladder logic processing; 4,096 I/O addresses • Various fieldbus network connections Bedpfx Alski Tq Se Aeln • High-speed server connection • I/F panels (10) displaying HMI on the trailer • Advanced Robot Motion Control (ARM) for higher productivity and minimal learning times • Energy saving up to 25% • Repair time (MTTR) • Easy maintenance with a function to check the status of the reducer, hardware diagnostics function, improved troubleshooting, and alarm recovery • Compact Flash slot and USB port facilitate data backup • Small and lightweight Windows® CE programming device features a color touchscreen with multi-window display.

Condition: good (used), Profibus single module, Profibus single module for PLC control, fieldbus, PROFIBUS, IO-Link input module Blsdpfxoxu Uv To Al Asn -Manufacturer: ifm, IO-Link input module -Type: AL1102 -Number: 7 modules available -Price: per piece -Dimensions: 210/60/H35 mm -Weight: 0.4 kg/pc.