Used Fintek Amh 2035 for sale (80)

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz Chjdjwbqrtspfx Al Aoc 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more new and used items in our store! International shipping costs on request!

Condition: used, Year of construction: 1992, total height: 2,700 mm, total width: 3,000 mm, total length: 5,300 mm, Colour: White Empty weight: 11.000 kg Price: On request - Year: 1992 - Documentation available: No - CE certificate present: No - Serial number: 9220212 - Drive system: Conventional - Bed milling machine model: Movable table - Number of axes [pcs]: 3 - X-axis travel [mm]: 3200 - Y-axis travel [mm]: 1000 - Z-axis travel [mm]: 1000 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 3500 - Table width [mm]: 800 - Tool holder: ISO50 - Main spindle power [kW]: 15 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout - └ Type of digital readout: Sony 3-A - Transport dimensions: 5300mm x 3000mm x 2700mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information Codpfxszwn Ege Al Aehc VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 1993, operating hours: 14,987 h, load capacity: 12,000 kg, lifting height: 5,100 mm, fuel type: diesel, mast type: simplex, construction height: 4,200 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 20,100 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,500 mm, Diesel forklift Load center: 1200 Fork width: 200 mm Fork thickness: 100 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Cedoz Ev S Uspfx Al Ashc Description: In addition to this Svetruck model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are available from us at any time. We would also be happy to buy your used forklift outright, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this 12120-35 model. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale in our showroom. Side shifter, fork positioner, Heater, full cabin

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 19,000 h, load capacity: 12,000 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: simplex, construction height: 5,200 mm, fork carriage width: 3,320 mm, fork length: 2,000 mm, empty load weight: 22,000 kg, total length: 5,200 mm, drive type: Diesel, construction width: 2,580 mm, Diesel Forklift Load center: 1200 mm Fork width: 300 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Pneumatic Front tire size: 12.00-20 Rear tires type: Pneumatic Chjdoxz H S Topfx Al Aoc Rear tire size: 12.00-20 Description: In addition to this Svetruck model, we have approximately 200 heavy-duty forklifts, compact forklifts, forklift trucks, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing under favorable conditions are always possible. We are also happy to purchase your used vehicle, even if you do not buy one from us. Our owner, Mr. Peter Sawitzki, will be happy to give you detailed advice regarding this 12120-35. P.S.: Our master workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We are also happy to offer your vehicle for commission sale at our facility. Sideshift, fork positioner, heater, full cabin,

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) Cedpsy Avg Esfx Al Ajhc • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity

Condition: reconditioned (used), Horizontal Press Baler DIXI 60 SLD Year of manufacture: 2014 Semi-automatic 60-ton baling system for economical volume reduction of residual materials (recyclables) in industry and trade: Cardboard boxes Tetra packaging Foils PET bottles Foam Insulation boards and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Feed opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Chjdpfenfux Uex Al Aoc Bale weight (depending on material) approx. kg: 370-410 Binding: manual Number of bindings: 3, with wire with quick release eyelets Drive power: 7.5 kW; 400V/32A The presses are tested and functional and are offered with a fresh UVV and inspection in accordance with DGUV regulation 3. The Dixi 60SLD is ready for immediate use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: Replace all hydraulic hoses. Change the hydraulic oil and check the hydraulic unit. The hydraulic cylinders are checked and replaced if necessary. Net price plus VAT and possible transportation.

Condition: excellent (used), Year of construction: 2016, operating hours: 518 h, functionality: fully functional, working width: 550 mm, area performance: 2,035 m²/h, overall weight: 253 kg, warranty duration: 12 months, water tank capacity: 40 l, FIMAP MX 55 BT SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) 2016 production year Machine mileage is 518 hours 550mm cleaning head, equipped with new pad holders with red pads, enabling work on any surface. New polyurethane rubber bands, resistant to contact with oil liquids, greases and petroleum derivatives. Wheel drive makes everyday use easier New protective rubber around the brush head prevents water from splashing outside the machine's outline New suction turbine ensures high water suction power from the squeegee Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model: Fimap MX 55 BT Power supply voltage: 24 V Brush working width (mm): 550 Suction nozzle working width (mm): 700 Efficiency (m²/h): 2035 Working speed (km/h): 4 Tank capacity (l): 40/50 Weight (kg): 253 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) Csdpfx Asu Id Tijl Aehc NEW pad holders with red pads (2x) Suction bar with new rubbers Tenzi Normal 5L liquid - FREE KEY FEATURES: A 40-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface A large working width (550mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: used, mileage: 314,567 km, power: 184 kW (250.17 HP), first registration: 05/2014, fuel type: diesel, empty load weight: 9,347 kg, maximum load weight: 8,653 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,800 mm, next inspection (TÜV): 11/2024, brakes: engine braking, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 5,700 mm, loading space width: 2,600 mm, loading space height: 900 mm, Equipment: ABS, central locking, crane, cruise control, differential lock, electronic stability program (ESP), parking heater, power assisted steering, soot filter, * German vehicle from 1st hand * Condition see photos * Hiab rear crane type 099 Hiduo * Rear crane foldable * with radio remote control * 11m hook height * 7,60m 1300kg * 5.70m = 1740kg * 4.10m = 2440kg * 2.30m = 4250kg * 5+6 control circuit * Various attachments available at extra cost * 2 hydraulic outriggers * 2 hydraulic extensions * Platform superstructure with high aluminum loading flaps * Screen printing floor * DIN lashing eyes * Load securing rail * High bulkhead * Platform dimensions 5.70m x 2.60m x 0.90m * Multifunction steering wheel * Cruise control * Air conditioning * Refrigerator * Engine brake * Comfort driver's seat with air suspension * Heated seats * E-window * Electric mirrors * CD Audio * Air suspension with raise/lower * Wheelbase 4800mm Cedjvhp Saopfx Al Aohc * 18.000kg GVW * Curb weight 9347kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, Belt line cutting device, cut-to-length line, cut-to-length shears, lever cutting machine, lever cutter -Cut-to-length system: with additional lever cutter, made from slats/blinds production -Cutting width: max. 210 mm -Cutting thickness: max. 0.5 mm -Lever cutter: IDEAL 2035 Cedpfsqh Efisx Al Aohc -Transport dimensions: 1025/500/H1240 mm -Total weight: 122 kg

Condition: good (used), Year of construction: 2019, Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, AC/DC power supply, direct current power supply, power supply module, power supply module, servo converter, servo converter -Manufacturer: Lenze, L-force Multi Drive HighLine servo inverter -Type: E94AMHE0044 Chedpfxexm Tauj Al Ajc -Expansion modules: E94EYAB / E94AYM43 / E94AYFLF / E94AYCER -Number: 9x inverters available -Price: per piece -Dimensions: 460/60/H290 mm -Weight: 4.0 kg/piece

Condition: used, power: 14 kW (19.03 HP), Year of construction: 2004, operating hours: 1,000 h, Equipment: all wheel drive, * Municipal vehicle * Creep gear * Differential lock on rear axle * Front axle can be switched on * 6-speed ----Construction: 3 cylinder diesel engine, 855 cc/14 KW, 6 forward/2 reverse gears, max. 14 km/h. Rear power lift, rear PTO, PTO speed 540/840/1000 rpm. Accessories: HW 160 Z hay tedder, year of manufacture 2016, weight 95 kg Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice). Cjdpfx Aletkb I Ue Aohc

Condition: used, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 4,240 mm, fork length: 1,000 mm, total length: 3,080 mm, - Bedienung: Sitz - Lastschwerpunkt: 500 mm - Lastabstand 388 mm - Achslast mit Last vorn/hinten: 4860/623 kg - Achslast ohne Last vorn/hinten 1689/1794kg - Spurweite vorn/hinten 942/172 mm - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/6 ° - Höhe über Schutzdach (niedrige Variante) 2035 (1949) mm - Sitzhöhe/Standhöhe 965 mm - Kupplunghöhe 473 mm - Gabelträger DIN 15173, Klasse/Form A, B: ISO II A - Arbeitsgangbreite bei Palette 1000 x 1200 quer 3390 mm - Arbeitsgangbreite bei Palette 800 x 1200 längs 3516 mm - Wenderadius 1678 mm - Fahrgeschwindigkeit (Blue-Q/Normal/Sprint) mit Last 16/16/20 km/h - Fahrgeschwindigkeit (Blue-Q/Normal/Sprint) ohne Last km/h 16/16/20 - Hubgeschwindigkeit mit Last 0,45 m/s - Hubgeschwindigkeit ohne Last m/s 0,63 - Senkgeschwindigkeit mit/ohne Last 0,48/0,41 m/s - Zugkraft mit/ohne Last N 4800/5000 - Max. Zugkraft mit/ohne Last N 11900/8700 - Steigfähigkeit mit/ohne Last 15/18,1 % - Max. Steigfähigkeit mit/ohne Last 23/27 % Beschleunigungszeit/15 m (Blue-Q/Normal/Sprint) mit Last 5,8/5,5/5,3 s - Beschleunigungszeit/15 m (Blue-Q/Normal/Sprint) ohne Last 5,4/5,1/4,8 s - Betriebsbremse Elektrisch/mechanisch Chjdpfx Alezrp Hnj Aoc - Fahrmotor, Leistung S2 60 min kW 2 x 6,5 - Hubmotor, Leistung bei S3 15 % kW 11 - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43531 - Batteriespannung V 48 - Energieverbrauch nach EN 16796 kWh/h 4,6 - Umschlagleistung t/h 155 - Energieverbrauch bei Umschlagleistung kWh/h 6,2 - Arbeitsdruck für Anbaugeräte bar 240 - Ölmenge für Anbaugeräte l/min 26,5 - Schallpegel, Fahrerohr dB(A)

Condition: excellent (used), Year of construction: 2017, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2017 CIMC 20FT ISO tank container 25,040L L4BN T12 Steam heating Bottom discharge Design temperature: -40/+130°C 2.5Y TEST/CSC valid until 03-2027 = Additional information = General Information Year of manufacture: May 2017 Model year: 2017 Weights Empty weight: 3,660 kg Payload: 32,340 kg Gross weight: 36,000 kg Chedpszdywuefx Al Asc Functional Cargo capacity: 25,000 l Body make: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for more information.

Year of construction: 1984, condition: ready for operation (used), Press force: 200t, working length: 3550mm, distance between columns: 3050mm, length: 4000mm, width: 2000mm, height: 3000mm, weight: 16t. The machine is fully functional and in good technical condition. Upper tools are included. The lower tool, consisting of the die block or prism, is missing. An on-site inspection is possible. Csdpfx Alszrn H Ho Ajhc

Condition: good (used), machine/vehicle number: 2456, Year of construction: 2008, load capacity: 15,000 kg, lifting height: 5,000 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,300 mm, total width: 2,580 mm, operation weight: 21,500 kg, additional equipment features: Warning triangle, Centralized greasing system, Equipment: lighting, SveTruck 15120-35 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20 Codpfjyuhm Hox Al Aehc

Condition: used, machine/vehicle number: 517301G00071, Diesel/propellant gas) BM 573200 - Internal no.: 5178095 - serial no.: (517301G00071) - Make: STILL - Type: RX 70-25 - Year of construction: 2017 - Lift mast: NiHo - H2 mast free lift: 1,700 mm - H1 mast free lift: 2,475 mm - H3 mast free lift: 3,690 mm - H4 mast maximum height: 4,500 mm - Fork carriage: #Int. sideshift, 1040 mm, 2A - Forks: 2000 mm - Tires: Supelelastik - Canopy: Cabin - Description: raised cab Chedjtt I H Tjpfx Al Aec - Driver's seat: MSG 65 Exklusiv PLUS textile cover - Hydraulic auxiliary system: simple for NiHo - Fuel system: Diesel tank 58L - Exhaust system: High exhaust, Eberspächer - Air filter system: Dry with pre-scraper and perforated plate - Hydraulic control: Mini-lever (4 levers) - Drive control: Single pedal - Reversing light: LED, on FSD, top, right - Lighting system: LED, normal, without MK - Searchlight: LED, on FSD, top, left+right - Hour counter: Hour counter - Cold store version: Standard - Warning signal when reversing: #STILL SafetyLight 4PLUS - Paint finish: Orange/silver metallic - Lettering: German - Operating hours counter: 2,700

Condition: excellent (used), mileage: 233,953 km, power: 129 kW (175.39 HP), first registration: 10/2022, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 85 l, color: black, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, suspension: steel, number of seats: 2, total length: 6,960 mm, total width: 2,150 mm, total height: 3,000 mm, permissible axle load (axle 1): 2,100 kg, permissible axle load (axle 2): 2,800 kg, loading space length: 4,520 mm, loading space width: 2,060 mm, loading space height: 2,040 mm, Year of construction: 2022, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), hill-start assist, navigation system, onboard computer, power mirror, tail-lift, traction control, General information Number of doors: 2 Cab: single Registration number: VSG-65-T Technical information Number of cylinders: 4 Engine capacity: 2.998 cc Transmission Transmission: Hi-Matic, 8 gears, Automatic Axle configuration Cjdpfoy Dugtsx Al Ashc Tyre size: 195/75R16 Brakes: disc brakes Front axle: Max. axle load: 2100 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 2800 kg; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Weights Empty weight: 3.049 kg Carrying capacity: 451 kg GVW: 3.500 kg Functional Tail lift: DHOLLANDIA DHLM.10, tail lift, 750 kg Condition Technical condition: very good Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Climate control - DAB Radio - Heated door mirrors - Lane assist - Leaf spring suspension - LED - Metallic paint - Multifunctional Steering Wheel - Radio/Cd/Audio system - Reversing camera - Side door - Spare wheel - Twin wheel axle - Wireless phone charger - Xenon lighting = Remarks = VIDEO: Very beautiful and neat Iveco Daily 40C18 3.0D 177 hp Euro 6E Hi-Matic 8-speed automatic GVW 3500 kg (Category B driving license) 233,000 km NAP verifiable Dhollandia tail lift 750 kg Internal dimensions: L. 4516 mm / W. 2056 mm / H. 2035 mm Technically and visually in very good condition

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Ladder rack pockets - Rear light bracket - Insert pockets Net price: €13,025.21 / Gross price: €15,500.00 Article number: ULM235482035.13 Technical data: • Brand: Unsinn • Model: ULM 4820-35-14 • Vehicle type: Long material trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 966 x 204 x 35 cm • External dimensions (L x W x H): 667 x 210 x 113 cm • Loading height of the floor: 78 cm • Permissible total weight: 3,500 kg • Tare weight: 1,055 kg • Payload: 2,445 kg • Chassis: High loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics • Hollow profile construction welded and completely hot-dip galvanized • Aluminum side panels, anodized, double-walled • All side panels can be folded down and removed • Steel corner posts, removable • Stable drawbar extension, can be extended without tools, free drawbar length approx. 3100 mm • Extendable rear light bracket 2000 mm, flush with the top edge of the loading area • Max. loadable with 200 kg of long materials at body length Codszy Dtlspfx Al Aohc • Max. trailer overall length 12000 mm to be observed • 4x ladder rack pockets 100 x 100 mm embedded in the floor • 4x insert pockets L = 300 cm, 90 x 90 mm • Maintenance-free rubber spring axles • Option to insert at all 4 corners for tarpaulin frames, grille attachments, side panel attachments or front wall extension • Stable long lever locks, recessed • Made of multi-layer glued screen printing plate, 18 mm, continuous without joints, non-slip and waterproof • 8 foldable lashing eyes, mounted recessed in the floor frame profile (600 DaN/kg) • 8 lashing eyes under the loading area • Maintenance-free rubber spring axle from ALKO • Axle with continuous axle body and individual wheel suspension • Reversing automatic • ALKO inertia coupling and parking brake • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Lighting recessed in the rear frame • Integrated rear fog light • 13-pole plug • Reinforced support wheel, for safe parking of the loaded trailer _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *AVAILABLE IMMEDIATELY* Includes: E & emergency hand pump, full steel floor Equipment: - 18 lashing points - Battery charger - Electric pump Net price: €8,277.31 / Gross price: €9,850.00 Article number: UDK235422011.01 Technical data: • Brand: Unsinn • Model: UDK 4220-35-14 • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 426 x 204 x 35 cm • External dimensions (L x W x H): 575 x 221 x 120 cm • Loading height of the floor: 78 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,140 kg • Payload: 2,360 kg Chjdezugh Uspfx Al Asc • Chassis: Low loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber suspension axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics • Aluminum side walls, anodized, double-walled • All side walls can be folded down and removed • Steel corner posts removable • Rear flap can also be pivoted • Attachment option at all 4 corners for tarpaulin frames, grille attachments, side wall attachments or front wall extension • Sturdy toggle lever locks • Full steel floor, 3 mm hot-dip galvanized - extremely robust • Drawbar and frame, hollow profile construction welded together and completely hot-dip galvanized • Many cross members, resulting in high point load capacity • All cross and longitudinal members rest on the ground • 18 lashing eyes countersunk in the steel floor, (symmetrically distributed), with pot magnet (1,500 DaN/kg) • U-profile on the rear, for easier placement of the ramps • Ramp compartment • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/75AH) in the box incl. cover • Emergency pump, manual, incl. socket insert, for tipping by hand when the battery is empty • Removable remote control for E-hydraulics • Integrated battery charger with Schuko plug • Maintenance-free rubber suspension axles from ALKO • Reverse drive automatic • ALKO overrunning device and parking brake • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced, automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg • Premium jockey wheel with ratchet strap roller _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transit plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, machine/vehicle number: 697, mileage: 32,242 km, power: 132 kW (179.47 HP), first registration: 01/1995, fuel type: diesel, empty load weight: 9,500 kg, maximum load weight: 2,300 kg, overall weight: 11,800 kg, tire size: 9r22,5, axle configuration: 4x4, brakes: retarder, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, operation weight: 18,200 kg, Equipment: ABS, all wheel drive, compressor, crane, differential lock, hydraulics, retarder, trailer coupling, TUV is made NEW truck registration , The Steyr in a dreamlike good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition , The 12S18 is equipped with: All-wheel drive , differential lock rear , 2 seat patches front a 3. Load capacity at 3.6 meters = 2 tons and at 5.4 meters = 1.36 tons, - MKG crane type HLK 73a1, this also has a Rotzler cable winch, type HK 022 with 10 mm steel cable to lift or lower loads from or into the shaft at the crane tip, - The crane nozzles still have a manual extension so as not to hinder the off-road capability. - Tire size 9R22.5, transmission with 6 gears plus off-road reduction , has a speed limiter , empty weight 9500 kg , total weight is 11800 kg , cubic capacity 6592cm? , , 24Volt power supply , The Steyr not only has Tuv when handed over, but also drives reliably :-) - The Steyr is also ideal as a hobby vehicle but does not shy away from daily work. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 Greetings, Philipp Codpfjqx Sznox Al Aehc

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 320 - 1.220 mm workpiece height max. 330 - 1.170 mm turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 1300 x 980 mm threading 42 M quill stroke 335 mm total power requirement 4,0 kW weight of the machine ca. 3000 kg. range L-W-H 2035 x 1000 x 2830 mm Furnishing: - Large-sized base plate, ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good gliding ability of the drill head on the boom - sanded surface Scope of delivery: - Cube table - Drill chuck arbor MK 5 / B 16 Cjdsxaaabspfx Al Aehc - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: good (used), machine/vehicle number: 2496, Year of construction: 2010, load capacity: 15,000 kg, lifting height: 5,500 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,230 mm, total width: 2,600 mm, operation weight: 23,200 kg, additional equipment features: Warning triangle, Centralized greasing system, Backup alarm, Dual tread, Front mud guards, Equipment: lighting, SveTruck 15120-35 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 12.00-20 Csdpfx Ajyuhnwel Aehc Wheel size – Steering wheel: 12.00-20

Condition: used, Manufacturer: CAM Model: CAM HF 77-8 Type: Continuous automatic cartoning/boxing machine Application: bottling (tilting screw) Previous use: pharmaceutical, packaging of syrup bottles. Refurbished by the manufacturer in 2004. A size range: 20mm to 70mm Size range B: 12mm to 70mm Codpfx Alozg I U He Aehc C format range: 50mm to 200mm ; Format range A + B max: 140mm Distribution of leaflets. Documents available with the machine. Siemens PLC

Condition: new, capacity 90 degrees: round 172 mm capacity 90 degrees: square 170 mm 170 x 170 dimensions of saw-band 2035 x 20 x 0,9 mm dimensions 430 x 960 x 520 m band speed 30 - 80 m/min total power requirement 1,5 kW weight of the machine ca. 38 kg SPECIAL PRICE!! Berg & Schmid - Assembly band saw PBS 171 ESC Powerful and particularly robust metal band saw Aluminum die-cast saw table and infinitely variable cutting speed for Miter cuts up to 60° Chsdpfx Ajfgyhzjl Asc Optional: machine base type 20508

Condition: new, sheet width 2035 mm plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 4145 kg dimensions of the machine ca. 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam Chsdpfx Alsxaaaho Aoc is hidden in the side stand - Segmented upper cheek