Used Zftk 500 for sale (15,942)

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 80 mm, center width: 1,500 mm, rotational speed (max.): 1,600 rpm, TECHNICAL DETAILS Turning diameter over bed: max. 500 mm Turning diameter over cross slide: max. 310 mm Turning diameter in gap: max. 720 mm Bed width: 405 mm Workpiece length between centers: max. 1,500 mm Turning length: max. 1,350 mm Effective gap length: 230 mm Workpiece weight: max. 500 kg Spindle nose: D8 Spindle bore: 80 mm Spindle taper: MK 7 Metric spindle taper diameter: 113 mm Spindle taper ratio: 1:20 Number of speed stages: 12 Spindle speed: 36–1,600 rpm MACHINE DETAILS Main motor power: 7.5 kW EQUIPMENT SINO digital position display Heavy-duty, vibration-damping machine bed with reinforcing ribs Wide, induction-hardened, and ground guideways Electrically interlocked chuck guard Adjustable micrometer stop Overload clutch Hardened and ground gears with oil lubrication Precision-bearing main spindle Ergonomic controls Single-lever control for longitudinal and transverse feed Rapid traverse for X and Z axes Gearbox for speed and feed selection Finely graded feed rates and thread pitches Fpedpfj Airvaox Aanop Main spindle gearbox with electromagnetic clutch Electrical components from well-known European manufacturers, including Telemecanique Multifix tool holder Turning chuck Faceplate Steady rests

Condition: used, Year of construction: 2018, operating hours: 6,955 h, machine/vehicle number: M542 8DC D01, repeat accuracy: 0.02 mm, working length: 4,000 mm, working width: 2,000 mm, Work area 4m x 2m, traverse speed 17.8 m/min, linear axis accuracy ±0.0127 mm, repeatability ±0.02 mm, Z-axis travel 305 mm, 610 mm, acceleration 0.1 g, circle accuracy ±0.0635 mm, pump pressure 3,800 bar, mobile operator station, touchscreen, LED lighting for status indication, software FlowXpert (integrated 2D/3D CAD/CAM software), pure water cutting, conventional abrasive waterjet cutting, height sensor Dynamic Contour Follower, splash guard, laser edge finder, TECHNICAL DETAILS Work area X-axis: 4,000 mm Work area Y-axis: 2,000 mm Material support area: approx. 4,100 x 2,100 mm Z-axis travel: 305 mm / 610 mm Programmable Z-axis travel: approx. 305 mm Traverse speed: 17.8 m/min Linear axis accuracy: ±0.0127 mm Repeatability accuracy: ±0.02 mm Acceleration: 0.1 g Circle accuracy: ±0.0635 mm Cutting speed increase through DWJ technology: up to 4x MACHINE DETAILS Waterjet system Pump pressure: 3,800 bar Cutting angle through beam compensation: 90° Table load capacity: approx. 2,441 kg/m² Operating hours: 6,955 h EQUIPMENT Mobile operator station Touchscreen Fpodpfx Aao Ahgrtensp LED status display FlowXpert software with integrated 2D/3D CAD/CAM function Pure water cutting system Conventional abrasive waterjet cutting system Secondary Z-axis for pure waterjet Programmable, servo-driven Z-axis Dynamic Contour Follower – automatic height sensing PASER 4 Dynamic Waterjet (DWJ) cutting head technology Automatic compensation of natural beam bending Splash guard Laser edge finder Abrasive desliming system Stainless steel beam catcher Continuously adjustable water level regulation for quiet underwater cutting Clamping and tensioning system Distributed drive system with covered ball screws Two-part steel table construction Vibration-damping separation of tank and guide system Abrasive desliming system, stainless steel beam catcher, water level regulation, clamping and tensioning system, secondary Z-axis pure waterjet, standard abrasive waterjet, programmable Z-axis, Z-axis (height adjustment): approx. 305 mm (programmable, servo-driven), water level control: fully adjustable for underwater cutting (low noise), drive: distributed drive system with covered ball screws, cutting head technology: PASER 4 Dynamic Waterjet (DWJ), compensates for natural beam bending, for precise 90° cuts at high speed (up to 4x faster), table load: high load capacity (approx. 500 kg/sq ft), table construction: two-part steel construction, separation of tank and guide system for vibration damping, material support area: approx. 4,100 mm x 2,100 mm.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item promptly between December 8, 2026, and December 12, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to column: 190–570 mm Rapid traverse rate: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Fpsdpo Ai Scvofx Aansp Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied secondary positions: 85 mm Max. tool diameter with free secondary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vice shown in the photos is not included. External reference: Schönichen - Lot 23

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 8, 2026, and December 12, 2026! TECHNICAL DETAILS Fsdpj Ai Shlefx Aanjpp Travel in X-axis: 960 mm Travel in Y-axis: 380 mm Travel in Z-axis: 380 mm Distance from table center to stand: 190–570 mm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle connection: ISO 40 Spindle speed: 100–6,000 rpm Ball screw, X and Y axes, diameter: 32 mm Ball screw, X and Y axes, pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vice shown in the photos is not included. External Reference: Schönichen - Lot 25

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 641/302, total width: 600 mm, total length: 800 mm, total height: 1,300 mm, overall weight: 120 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 8, 2026, and December 12, 2026! MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Fsdj Ai Scgspfx Aanjpp Rated current: 30 A Connected power: 8.1 kW Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 1,300 mm Weight: 120 kg External reference: Steinbach & Holler - Lot 62

Condition: as good as new (ex-display), FRONIUS MAGICWAVE 5000 AC DC Fpedpfxsxhd Tuj Aanep Scope of delivery: ➤ Fronius MagicWave 5000 (500A) ➤ Fronius FK 4000 water cooling unit ➤ Fronius TIG hand welding torch ➤ Fronius trolley ➤ Ground cable 3-4m ➤ Pressure regulator

Condition: good (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 500 mm, saw blade speed: 2,800 rpm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, saw band length: 500 mm, main saw diameter: 500 mm, saw blade length: 6,000 mm, Double automatic aluminum saw with 500 mm blades. Fedpfex U Df Hjx Aanjpp Cuts materials up to 6000 mm in length. Can automatically cut an entire profile into smaller pieces. Length, cutting angle, and material thickness are electronically adjusted on the machine. The saw system is in perfect working order. For sale due to production shutdown. We are happy to assist with loading the machine onto the buyer's truck.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, planing width: 500 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,700 rpm, total length of planing tables: 800 mm, total width: 920 mm, total height: 1,140 mm, overall weight: 450 kg, VEBA S500 PLANER | 500 MM | 4 KNIVES | 4.3 kW | 2009 | ITALY | Fpsdoz A A Iwjpfx Aansp Professional VEBA S500 planer/thicknesser from the renowned Italian company VEBA Meccanica S.r.l. This machine is designed for the precise planing of wooden components to a specific thickness. Its robust, compact design and 4-knife cutterblock make it ideal for use in both carpentry workshops and for the production of solid wood components. Made in Italy, this machine is used and ready for operation. KEY FEATURES: - Renowned Italian brand VEBA - Model S500 - Planing width of 500 mm - 4-knife cutterblock - Traditional knives - Robust construction - 2 feed speeds - Material height range up to approx. 240 mm - Maximum planing depth of 8 mm - Table height adjustment - 2 rollers in the table to facilitate material feed - Machine equipped with CE marking - Year of manufacture 2009 TECHNICAL DATA: - Planing width: 500 mm - Work table dimensions: approx. 500 × 800 mm - Material height range: approx. 4–240 mm - Maximum planing depth: 8 mm - Planing cutterblock: Ø 110 mm - Number of knives: 4 pcs - Type of knives: traditional - Cutterblock rotational speed: approx. 4700 rpm - Feed speed: 6.5 / 13 m/min - Table rollers: 2 pcs - Height adjustment: electric and mechanical MOTOR / POWER SUPPLY: Motor power: 4.3 kW Voltage: 400 V Power supply: 3 phases DIMENSIONS AND WEIGHT: Machine dimensions: approx. 1000 × 920 × 1140 mm Weight: 450 kg – according to the nameplate We invite you to test the machine on-site. Financing options available through leasing or installment plans. WE ORGANIZE TRANSPORT.

Condition: used, Year of construction: 1997, KP03 Üretim Markası: OMERA H TİPİ EKZANTRİK PRES Makinenin Üretim Yılı: 1997 Kapasite : 500 TON Fpsdpjzxq N Dsfx Aansp Hava Tüketimi (m3/saat) : 30 Güç (KW) : 70 Kapladığı Alan (m2) : 44,12 Lokasyon: KOCAELİ/ÇAYIROVA Üst Tabla Ebatları : 268 cm x 135 cm Alt Tabla Ebatları : 270 cm x 135 cm Pres Yükseklik : 5,25 m Pres En : 4,10 m Pres Genişlik: 2,05 m Dakikadaki Vuruş Sayısı : 55 spm Sac sürücü, Sac açıcı ve Sac doğrultucu Markası : Dimeco used

Condition: used, Year of construction: 1998, machine/vehicle number: 098211, KP09 Üretim Markası: OMERA H TİPİ EKZANTRİK PRES Makinenin Üretim Yılı: 1998 Kapasite : 500 TON Hava Tüketimi (m3/saat) : 30 Güç (KW) : 70 Kapladığı Alan (m2) : 44,12 Fpjdpfxjzxq Uyo Aanjp Lokasyon: KOCAELİ/ÇAYIROVA Üst Tabla Ebatları : 268 cm x 135 cm Alt Tabla Ebatları : 270 cm x 135 cm Pres Yükseklik : 5,25 m Pres En : 4,10 m Pres Genişlik: 2,05 m Dakikadaki Vuruş Sayısı : 55 spm Sac sürücü, Sac açıcı ve Sac doğrultucu Markası : Dimeco

Condition: as good as new (ex-display), FRONIUS TPS 5000 ✅ Scope of supply: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feeder VR 4000 ➤ Fronius intermediate hose package, standard, from 1.5 m ➤ Fronius undercarriage ➤ Fronius hose package ➤ Ground cable, 3-4 m ➤ Pressure regulator This device can be used to weld almost all materials, including aluminum, steel, and V2A. It features wire feed programs and is also suitable for MIG brazing (Cusi), which is often used in the sheet metal industry. Additional options and uses: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, with which you can create and load characteristic curves to further expand the functions of the TPS device. ----- Fedpfx Ajwbknbeanepp IMMEDIATELY AVAILABLE WITH VAT INVOICE Inspection is possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For clarification, we buy like-new used devices, disassemble them, check everything, replace worn parts if necessary, and only then, after a successful test weld, is it approved for sale. "All" devices are clean and have neither burn marks on the displays nor countless burn marks or dents on the device! You are buying from us an item that is also worth seeing and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for an intra-community supply within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal collection. ►►►Is insured shipping possible? Yes, we will gladly send you the purchased set, well-packed and insured, on a Euro pallet. ►►►Is there a warranty? We sell the machines for a third of the new price and unfortunately do not have any room to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We know these devices and do not sell anything that we are not familiar with. All prices are starting prices; you can configure the devices with us. Robot device or hand-held device. Long or short connection hose package. Various hose packages to choose from. Synchro pulse. 270, 400 or 500 amp devices in stock. CMT version available as a hand-held or robot device. It is best to call us; we will discuss your application and you will receive an initial price estimate.

Year of construction: 1997, operating hours: 54,646 h, condition: used, Traub TNA500 Fedeyt Slwspfx Aanspp Serial No. 253 Spindle speed: 2800 rpm 12-position tool turret Equipped with driven tools Power: 46 kVA

Condition: new, Year of construction: 2020, functionality: fully functional, empty load weight: 135 kg, tank capacity: 500 l, pressure (max.): 6 bar, NEW! Packed!!! Dimplex standing buffer tank PSW 500, Universal buffer tank for sale in several pieces Nominal capacity 500 l, PU insulation (2.4 kWh/24h = 100 W), with three 1.5" sleeves for immersion heaters (up to CTHK 635) with two 2.5" heating water connections with DN 180 flange Fedpfxjw Hcdlo Aanopp for installing RWT 500 finned tube heat exchanger with three adjustable feet Inclination angle 2.08 m Operating pressure 6 bar Height: 1950 mm Inclination size: 2045 mm Diameter: 700 mm Weight 135 kg Visszajelzés küldése Oldalsó panelek Előzmények Mentve

Condition: excellent (used), CATALOG NUMBER 7614 Technical specifications: - inlet width 550mm - inlet height 220mm - shaft width 630mm - blade length 630mm - number of blades 2 pcs - screen dimensions 60x60mm - 2 toothed drive shafts from below - motor for lower shafts approximately 1.5kW - toothed drive shaft from above - motor for upper shaft approximately 1.5kW - vibratory feeder - vibratory feeder length 4750mm - vibratory feeder width 450mm - main motor 45kW - vibratory feeder motor 1.5kW - auto-reverse - reverse gear - overall machine dimensions (L/W/H) 3200x1700x1400mm - overall machine dimensions (L/W/H) 4750x800x1100mm - weight approximately 4500kg ADVANTAGES – auto-reverse (with adjustment option) – reverse gear – used shredder, very good condition Net price: 120900 PLN Net price: 28116 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) Fpjdpfxo Aithwe Aansp

Condition: excellent (used), Lifting, rotating 360°, swiveling 360°, also overhead operation Severt L manipulator, 500 kg load capacity PRODUCT TYPE S10 TYPE CODE S10.1-1HH 500 kg Fpodpfxs Ah Smxe Aansp LOAD CAPACITY (KG) 500 kg STROKE min. 600 mm STROKE max. 1400 mm ARM LENGTH (MM) 1000 mm CLAMP PLATE 760 mm Self-weight 900 kg BENDING MOMENT ARM NM 1100 LIFTING DRIVE hydraulic All machines come with documentation and operating instructions.

Condition: used, This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. Fpjdpfxjxv A N Re Aanep LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Plockmatic SD-500” booklet-making system Item for sale: 1 x Plockmatic SD-500 with the following equipment: incl. SD BM Booklet Maker incl. SD-BF Bookfold Fpsdezz Rp Aopfx Aanep incl. SD RCT Rotate Crease Trim incl. SD-BF Bookfold price new over 60.000€ net Meter readings: Total: Approx. 4187 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Fpsdpfozx D Efsx Aanep

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW Fsdpfjma Dkfex Aanepp two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: new, APPROX. 8.4 RUNNING METERS, H: 500CM, SHELF LOAD: 4500 KG, PALLET RACKING, HEAVY-DUTY RACKING, HIGH-BAY RACKING, INDUSTRIAL RACKING, RACKING IMMEDIATELY FROM STOCK Approx. 8.4 running meters, h: 500 cm, shelf load: 4500 kg Pallet racks, heavy duty racks, high racks . Industrial shelving , Racks Immediately from stock Data : - Height : approx. 500 cm - Depth : approx. 110 cm - Length : approx. 8.4 running meters Fodpfx Aj Aifxloanjpp - Load: 4500 kg shelf load - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 04 x upright approx. 500 cm x 110 cm, disassembled. - 18 x crossbar approx. 270 x 15 x 5 cm, T45. - 36 x safety pins. - Levels: Floor + 3 - 36 pallet spaces incl. floor spaces. - - IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1840,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Keyence VL-500” 3D co-ordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features incl. software incl. VL-H2P add-on software incl. VL-H2G add-on software incl. laptop for operation incl. calibration plate Ready for immediate use Condition: Fpedpfjz N Akgex Aanop This listing is for a second-hand unit, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our opening hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: good (used), Sumbel Herold 500 Gluing Machine This machine is like new, fully functional and ready for production. This is the most valued brand among small laminating machines. Ideal for producing covers, decorative packaging, and more. Made in Germany. Fpods Aitiijpfx Aansp The machine operates on hot glue. It features a built-in heating plate and a water bath. Brass rollers. Infinitely adjustable: glue thickness, gap width, and speed. Working width: 500mm Power supply: 380V Weight: 60kg

Condition: excellent (used), Year of construction: 2011, Duplo DC10/60i collating machine • Stations per tower: 10 stations • Loading capacity per station: 65 mm • Processing speed: Up to 10,000 sets per hour for collating only; up to 5,000 brochures per hour in a system combination. Duplo DBM 500 • Paper formats: Min. 105 x 148 mm to max. 350 x 610 mm (or 356 x 508 mm depending on the specific system configuration). • Paper weight: Fine quality paper from 52–157 g/m²; covers/card stock up to 300 g/m². • Processing speed: Up to 5,000 brochures per hour (e.g., in A5 format). The speed dynamically adjusts to the format (approx. 4,600/h for A4, approx. 4,000/h for A3). • Capacity (thickness): Staples sets up to 5 mm thick (approx. 50 sheets at 80 g/m² paper) and folds up to 25 sheets. • Paper formats: • Width: 120 mm to 356 mm • Length: 170 mm to 500 mm (or up to 508 mm in the Pro system) • Stapling heads: Standard equipped with 2 Hohner stapling heads, expandable to up to 4 heads for multiple or dual-purpose production. Duplo DBM500T • Processing speed: Synchronized with the DBM-500 booklet maker (up to 5,000 brochures per hour). • Trim width: Can remove between 1 mm and 20 mm thickness in a single cut on the front edge. • Booklet thickness: Trims booklets with a thickness of up to 5 mm (which corresponds to approx. 50 sheets / 200 pages at 80 g/m²). • Paper formats (input after folding): Fpodpfx Aj Ah Tlreanep • Width: 120 mm to 356 mm • Length: 85 mm to 250 mm (final format of the folded booklet)

Condition: used, machine/vehicle number: 008653, Max. panel width: 3200 mm Fsdpfxszvwqco Aanopp Max. panel length: 3200 mm Main saw blade projection: 150 mm No of Grippers: 9

Condition: used, Year of construction: 2013, operating hours: 10,481 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 56 m/min, rapid traverse Z-axis: 60 m/min, workpiece height (max.): 350 mm, workpiece diameter (max.): 500 mm, rotary table diameter: 500 mm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 30 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, Well-maintained MAZAK VARIAXIS i500 - Low operating hours: 10,481 - Internal coolant supply: 25 bar - Renishaw tool measurement system: RMP 600 Fodpfx Ae Air Iajanspp - Handwheel - Steep taper 40 - A-axis: -120° to +30° (0.001°) - C-axis: ±360° (0.001°) - Distance from table surface: 50 mm - 560 mm - Table load capacity: 300 kg - Available for inspection while in operation.