Used Flash Pasteuriser for sale (712)

Condition: good (used), functionality: fully functional, machine/vehicle number: E1X353T00851, Year of construction: 2006, operating hours: 14,997 h, load capacity: 8,000 kg, lifting height: 5,650 mm, load center: 600 mm, fuel type: gas, mast type: duplex, power: 72 kW (97.89 HP), motor manufacturer: Perkins, fork length: 2,000 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 12,610 kg, Equipment: lighting, Linde H80T-03 Gas forklift, year of manufacture 2006 with a Duplex mast Details: Linde H80T-03 Year of manufacture: 2006 Work hours (h): 14997 Mast type: Duplex Lift height (mm): 5650 Freelift (mm): 0 Build height (mm): 3570 Attachments: None Lift capacity (kg): 8000 Fork length (mm): 2000 Weight (kg): 12610 Additional hydraulic vehicle: AH2 Additional hydraulic mast: AH2 Lasdszta Daopfx Anxog Front wheels: Superelastic Rear wheels: Superelastic Engine manufacturer: Perkins Engine power (kW): 72 Engine size (L): 6,0 Accessories: Full cabin with heater. Front & rear wipers. Front & rear spot lights. Flashing beacon.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 Ljdjzu Nvzspfx Anxsag - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 08812-00-6627, Year of construction: 2021, total length: 1,300 mm, total height: 1,920 mm, total width: 1,740 mm, type of input current: AC, overall weight: 550 kg, input voltage: 230 V, input current: 32 A, shaft length: 1 mm, path measurement accuracy: 1 mm, temperature: 420 °C, input frequency: 60 Hz, sheet thickness aluminum (max.): 1 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.011 mm, wall thickness: 1 mm, electrical fuse: 32 A, table width: 1,000 mm, table length: 1,000 mm, repeat accuracy: 0.011 mm, workpiece weight (max.): 50 kg, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, power: 4 kW (5.44 HP), travel speed (max.): 12,000 mm/min, space requirement length: 1,300 mm, space requirement height: 1,920 mm, noise level: 55 dB, operating temperature: 60 °C, space requirement width: 1,740 mm, Equipment: CE marking, We are offering our CreatBot F1000 industrial FDM 3D printer, which was meticulously utilized for prototyping large-scale engineering parts. This machine has spent its operational life in near-laboratory conditions - housed in a dedicated, dust-free cleanroom with internal air ventilation. It is in fully operational, working condition and has been heavily upgraded for enhanced print stability, superior surface finishes, and maximum reliability. This unit features hardware and software optimizations that make it perform significantly better than a stock factory model: - Upgraded Print Head ($500 Value): Swapped with the newer, more advanced print head from the CreatBot D1000 model for superior extrusion control. - Upgraded Software: Flashed with the updated CreatBot D1000 software suite for smoother operation and better motion profiling. - Premium PEI Build Plates ($550+ Value): Includes two (2) custom 1000x1000 mm steel sheets finished with a single-sided golden textured PEI powder coating (replaces the original metal squares). These provide an ultra-smooth first layer and incredible print adhesion. - Advanced Thermoregulation: Custom canvas insulation panels added to the doors. This ensures an even internal chamber temperature, reduces warping on large prints, and significantly lowers power consumption. - Low-Friction Filament Rollers: Custom-engineered rollers dramatically reduce filament drag and physical strain, virtually eliminating the risk of filament breakage mid-print. - Fully Rebuilt Filament Drying Compartment: Completely re-engineered for flawless material storage. Features a separate digital controller, high-precision temperature sensor, the original heating element/fan, and an additional external fan for perfectly even heat distribution. You can easily set and maintain any achievable drying temperature. - Precision Z-Offset Tool: Comes with a specialized micrometer calibration tool to check and perfectly dial in the Z-axis nozzle distance before launching massive print jobs. - Materials Printed: Primarily used to print PETG, with a small amount of ABS and PLA. Lsdpfxozhr Rhs Anxsag - Recent Major Maintenance: This machine has been frequently serviced. All X, Y, and Z axis tension belts were replaced very recently and have minimal operating hours on them. - Testing: The printer is fully operational and can be tested upon request prior to collection. What’s Included in the Sale: The upgraded CreatBot F1000 3D printer unit - 2x Custom 1000x1000mm Golden Textured PEI Build Sheets - Special Z-offset micrometer calibration tool - Massive Spare Parts Package: All original OEM items that were upgraded are included in the sale, alongside a large stash of extra printing heads, various nozzle sizes, spare filament, and more. Delivery Terms: EXW (Ex Works) Logistical arrangements and shipping costs are entirely the responsibility of the buyer. However, we will happily pack and secure the printer safely for freight transit on our end to ensure it leaves our facility in perfect condition.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN552402, Year of construction: 2017, operating hours: 6,710 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 1,800 mm, load center: 500 mm, fuel type: electric, mast type: triplex, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 7,076 kg, total height: 2,600 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, cabin, lighting, sideshift, Jungheinrich EFG 540ks 4-wheel electric forklift, year of manufacture 2017 with a Triplex mast & a battery from 2024 Details: Jungheinrich EFG 540ks Year of manufacture: 2017 Work hours (h): 6710 Mast type: Triplex Lift height (mm): 5500 Freelift (mm): 1800 Build height (mm): 2600 Attachments: Sideshift Lift capacity (kg): 4000 Fork length (mm): 1200 Weight (kg): 7076 Additional hydraulic vehicle: AH2 Additional hydraulic mast: AH2 Front wheels: Superelastic Rear wheels: Superelastic Battery YOM: 2024 Battery capacity (Ah): 775 Ljdpfx Anoz D D U Ioxjag Battery voltage (V): 80 Accessories: Front & rear wipers. Front & rear spot lights. Flashing beacon. Comments: Full freelift. AH2 hoses to the fork carriage.

Condition: good (used), functionality: fully functional, machine/vehicle number: CE311133, Year of construction: 2007, operating hours: 8,780 h, load capacity: 4,000 kg, lifting height: 5,000 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,520 mm, battery capacity: 625 Ah, battery voltage: 80 V, front tire type: superelastic tires (non-marking), rear tire type: superelastic tires (non-marking), empty load weight: 7,020 kg, Equipment: clamp, lighting, BT C4E400V 4-wheel electric forklift, year of manufacture 2007 with a Triplex mast and paper roll clamp Details: BT C4E400V Year of manufacture: 2007 Work hours (h): 8780 Laodpfx Anezmfh Doxjg Mast type: Triplex Lift height (mm): 5000 Freelift (mm): Vollfreihub Build height (mm): 2520 Lift capacity (kg): 4000 Weight (kg): 7020 Additional hydraulic vehicle: AH2 Additional hydraulic mast: AH2 Front wheels: Superelastic non marking Rear wheels: Superelastic non marking Battery YOM: 2018 Battery capacity (Ah): 625 Battery voltage (V): 80 Accessories: Flashing beacon. Comments: Full freelift. Capacity with attachment: 2150 kg.

Condition: good (used), Textile screen printing flash dryer Acosgraf Texflash SE 6000 6000W 400V 3 phases 6 x 1000W independent lamps for auto or manual machines Lodpfx Asvnrkfjnxoag automatic use with sensor very clean We ship everywhere in Europe (shipping cost to be added)

Year of construction: 2020, operating hours: 15 h, condition: like new (used), functionality: fully functional, number of chambers: 1, laser hours: 6 h, laser power: 220 W, laser wavelength: 1,064 nm, protection type (IP code): IP20, machine/vehicle number: 100102440/49, laser source manufacturer: Coherent, laser source model: Nd:YAG, Equipment: CE marking, We offer this Coherent laser, model Integral, in like-new condition, manufactured in 2020. Manufacturer: Coherent Model: Integral Year of manufacture: 2020 Condition: like new Category: 33 Type: Class 4 laser Laser type: Nd:YAG Source: Flash lamp DIN EN 60 825-1:2008-05 MADE IN GERMANY 21CFR 1040.10 / 1040.11 Laedpfx Anjz A Tcxoxog If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, overall weight: 100 kg, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, type of cooling: water, input current: 16 A, laser power: 300 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, travel distance X-axis: 120 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 800 mm, continuous power: 9 kW (12.24 HP), Equipment: type plate available, We are selling a like-new ALM300. It underwent a complete service in September 2026 and a new laser unit, including a flash lamp, was installed. The price was €12,500.00 excluding VAT. Includes special equipment: Tilting-swiveling objective, LED-UW Ergonomic wedge, 5-25 degrees Aluminum light case Camera set ALFT-HDMI Optional, if required: Laser protection curtain, 2x 4300x2100mm, €3,000.00 Extraction and filter system LN 260 ZA-W3, €3,000.00 (filter in like-new condition) Laser safety glasses, 2x, €500.00 Lajdpfxezyzwne Anxeg New price: €130,000.00

Condition: good (used), functionality: fully functional, machine/vehicle number: FN548678, Year of construction: 2015, operating hours: 6,427 h, load capacity: 2,500 kg, lifting height: 4,400 mm, free lift: 1,400 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,240 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,600 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 4,995 kg, Equipment: cabin, lighting, sideshift, Jungheinrich EFG 425ks 4-wheel electric forklift, year of manufacture 2015 with a Triplex mast & scales Details: Jungheinrich EFG 425ks Year of manufacture: 2015 Work hours (h): 6427 Mast type: Triplex Ledpfx Anoyaa Aqoxjag Lift height (mm): 4400 Freelift (mm): 1400 Build height (mm): 2240 Lift capacity (kg): 2500 Fork length (mm): 1600 Weight (kg): 4995 Additional hydraulic vehicle: AH2 Additional hydraulic mast: AH2 Front wheels: Superelastic Rear wheels: Superelastic Battery YOM: 2017 Battery capacity (Ah): 620 Battery voltage (V): 80 Accessories: Partial cabin (windscreen & roof). Front wiper. LED Front & rear spot lights. Flashing beacon. Load guard. Comments: Full freelift. Capacity with attachment: 2080 kg. Forkpositioner opens from 370 mm to 1000 mm.

Condition: used, Year of construction: 1999, Capacity: 350 hl/h Operating over pressure: 24 bar Desing temperature: 104 °C Ljdpfjzty Tuox Anxeag Length: 1,6 m Width: 0,85 m Height: 2,2 m Weight: 5000 kg Features: product pump H: 9,8 bar (Hygiana CN II, GEA, 350 hl/h), booster pump H: 4,7 bar (EURO Hygia CN II, GEA, 350 hl/h), hot water pump H: 1,3 bar (Maxa -DIN 80-2ßß 4/4, GEA, 700 hl/h)

Condition: new, Model MDH 3 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 3 Micron Dryer manufactured by Hosokawa Micron. Installed Power – 45 kW (Rotor) 2,2 kW (Classifier) Airflow - 6,000 m3/hour Evaporative 600 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder, natural gas fired air heater and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Ledpfxezvxxno Anxeag Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, Year of construction: 1996, Chamber pasteuriser for the simultaneous pasteurisation of 6 pallets. Additional title: Batch pasteurisation of up to 6 pallets of filled bottles at a time Ljdpfx Anezizp Nsxeag Number of pallet spaces: 6 pcs. Material: stainless steel Position: in a stainless steel housing with feet

Condition: good (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 30 mm, displacement volume: 85 cm³, total length: 4,200 mm, total width: 2,100 mm, total height: 3,600 mm, overall weight: 7,300 kg, Equipment: documentation/manual, ARBURG Allrounder 1200 T 1000-170 Stock No.: 503459 Manufacturer: ARBURG Type: Allrounder 1200 T 1000-170 Control System: Selogica Year of Manufacture: 2013 Operating Hours: 22420 h Technical Data - Clamping Unit Clamping Force: 1000 kN Minimum Mold Height: 400 mm Maximum Mold Distance: 700 mm Opening Stroke: 300 mm Platen Size (Diameter): 1200 mm Ejector Stroke: 175 mm Ejector Force: 25 kN Centering of Moving Platen (Diameter): 125 mm Centering of Fixed Platen (Diameter): 125 mm Mold Weight: 1150 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 85 cc Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 120 mm Number of Heating Zones: 4 Nozzle Distance: 210 mm Dimensions & Weight Machine Dimensions (L x W x H): 4.2 m x 2.1 m x 3.60 m Total Weight: 7300 kg Equipment 3x Temperature Control Units for Hot Runner Screen Text: German CEE Socket 16A Lasdpfjz A Dmzjx Anxog Compact-Flash Drive Rotary Table Freely programmable inputs (2) and outputs (2) Machine with Material Hopper Machine with Water Manifold Needle Gate Nozzle, Hydraulically Actuated EUROMAP 67 Handling Interface Servo-Controlled Hydraulic Pumps Wear-Resistant Plasticizing Unit

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Radiant Vision Systems ProMetric I IC-PMI29-XB Imaging Colorimeter High-end industrial imaging colorimeter camera designed for precise luminance and color measurement in demanding applications. This system belongs to the renowned ProMetric I series, widely used in display testing, LED inspection, and automated quality control environments. Lodpfx Ajzwd Hysnxoag 29 Megapixel high-resolution imaging colorimeter Accurate luminance and chromaticity measurement Scientific-grade sensor for repeatable and reliable results High sensitivity and wide dynamic range Designed for industrial and laboratory use Compatible with Radiant Vision Systems software (TrueTest) Suitable for integration in automated inspection systems Applications Display testing (LCD, OLED, MicroLED) LED brightness and color validation Surface inspection and uniformity analysis Automotive display and lighting validation Industrial quality control processes Technical Specifications Model: IC-PMI29-XB Resolution: 29 MP (6576 × 4384) Measurement: Luminance & Color (CIE) Interface: USB / Ethernet Made in USA Condition Used unit in very good condition, removed from a professional industrial environment. Fully functional / Untested (adjust based on reality). What’s Included Radiant Vision Systems ProMetric I IC-PMI29-XB Camera Radiant Vision Systems HALCON USB License Dongle (Software Key) Radiant Vision Systems USB Flash Drive Radiant Vision Systems Electronic Component (P/N 10856) Original Protective Carrying Case Accessories as shown in photos

Condition: excellent (used), 3 x 4 trolley retorts from recently closed UK Babyfoods factory. 1300mm models. Complete with trolleys and baskets for cooking / pasteurising pouches. We have the complete contents of this factory available. Laedpfxjy I Dh Ij Anxog

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview Ledeydh Agopfx Anxjag The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: good (used), mileage: 870,595 km, power: 169 kW (229.78 HP), first registration: 02/2009, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 6,460 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro4, suspension: steel-air, number of seats: 2, total length: 10,220 mm, total width: 2,550 mm, total height: 3,720 mm, loading space length: 7,680 mm, loading space width: 2,530 mm, Year of construction: 2009, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Leather / Fabric - Manual - Pump - Central lubrication = Notes = Number of axles: 3, Configuration: 6x2, Payload: 16410 kg, Tare weight: 10590 kg, Gross vehicle weight: 27000 kg, Total tank capacity: 420 liters, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 10 tons, Central lubrication, Type of cab: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: White, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Flashing lights, Engine power: 169 kW (227 hp), Fuel: Diesel, Euro: 4, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Clutch pedal, Power steering, ABS, Pump, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Leather / Fabric, Seat adjustment: Manual, 6x2*4 Airco NL-Truck = Additional Information = Transmission Gearbox: SCA, 12 gears, Automatic Axle Configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm; Suspension: Leaf suspension Axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inside: 9 mm; Tire tread depth left outside: 6 mm; Tire tread depth right inside: 7 mm; Tire tread depth right outside: 7 mm; Suspension: Air suspension Axle 3: Tire size: 385/55R22.5; Lift axle; Steered; Tire tread depth left: 13 mm; Tire tread depth right: 10 mm; Suspension: Air suspension Weights Tare weight: 10,590 kg Payload: 16,410 kg Lsdoz Aa Auepfx Anxsag GVW: 27,000 kg Functional Load platform height: 128 cm Pump: Yes Maintenance APK (Technical Inspection): valid until 02/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification License plate: BV-VD-15 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Honest business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Ledpjzp Nz Tjfx Anxjag Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Condition: like new (used), Year of construction: 2022, functionality: fully functional, complete plat concisting of: Bi-rail overhanging conveyor with two points bar support , lift and rotation unit Spray booth for robot with full recirculation, with autimatic pre-filter replacment system High pressure humidificer for spray booth and flash off room Robotic spray system for windows with jacket nozzle cleaning unit automatic color change (3 independent ) electrostatic safty system paint flow meter drying tunnel with ldp system and axial fans supervisor systeem with data interface and datamic reader “The line is packed for transport. It has been previously installed, but it has never been taken into operation.” Lajdpfxexw Ux He Anxog

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, pressing force: 100 t, working width: 3,100 mm, working length: 3,100 mm, High quality, very clean used Bystronic 8axis cnc pressbrake for sale with hemming table BYSTRONIC XPERT100x3100 100 ton x 3100mm 8 Axis CNC Hydraulic Down stroke Press Brake Manufactured 2009 – fully serviced and well maintained High Specification: Year of Manufacture /new 2009 Model Xpert 100x3100 Hydraulic tool clamping Back gauge Programmable Guards Capacity 100 Ton Maximum length of bend 3100mm / 3metre Max stroke 215mm Rapid approach 180mm/s Tooling top and bottom Wander type footswitch Lasdpfx Aetv Ixtsnxsg Total 8 axis Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge With hemming table to Dutch fold / produce safety edges and flashings Crowning

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 35/1997, Beer pasteurizer - Heat exchanger Manufacturer APV Laodpfxsquuxue Anxjg TYPE / Year 35 / 1997 Capacity 8000 Kg /h Working Pressure 16 bar Max working temp 95 *C

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 Lasdpfoxm Rwqox Anxsg 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We are offering this Hebbecker S-LINE screen printing machine in very good condition, manufactured in 2022. Manufacturer: Hebbecker Model: S-LINE Year of manufacture: 2022 Condition: very good Type of machine: screen printing machine This is a complete set consisting of a carousel specifically designed for tote bags, with an automatic ejector and a tunnel. Electric rotation, pneumatic screen locking, 8 stations/3 printing positions. 1 flash pre-drying unit, 1 pneumatic tensioning system for securing the tote bags. SIEMENS automatic ejector integrated into the tunnel entrance. Lasdpfjzu Nxcex Anxsg Purchase value in 2022 - net price €112,000.00 - new condition, very little use. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2024, CMM machine manufactured in 2024. This Hexagon MARVEL 3D Scanner features multiple scanning modes, including Standard, Fine, and Edge Detection, with a measurement rate of up to 2,100,000 points per second. It offers a scanning area of up to 600 x 550 mm and a resolution of up to 0.02 mm. If you are looking to get high-quality scanning capabilities, consider the Hexagon MARVEL CMM machine we have for sale. Contact us for further details. • Measurement rate: • Standard / Single Line: 2,100,000 pts/s • Fine: 900,000 pts/s • Scanning area: up to 600 x 550 mm • Single Line mode width: 300 mm • Light source: 22 blue laser lines + 1 single blue laser line + 5 parallel blue laser lines • Resolution: up to 0.02 mm • Accuracy (with targets): • Volumetric (Standard): 0.02 + 0.04 mm/m • Volumetric with scale bar: 0.02 + 0.03 mm/m • Volumetric + photogrammetry: 0.02 + 0.02 mm/m • Hole accuracy: up to 0.03 mm • Hole volumetric accuracy: 0.03 + 0.04 mm/m • Target-free accuracy: • Volumetric (Standard): 0.05 + 0.02 mm/m Lsdpfsz Df Rksx Anxjag • Hole volumetric accuracy: 0.06 + 0.02 mm/m • Built-in photogrammetry: • Volumetric accuracy: 0.020 mm/m • Average deviation: 0.007 mm • Depth of field: • General: 600–2500 mm • By mode: Standard/Single Line 450 mm; Fine 150 mm • Maximum DOF at furthest range: 550 mm • Stand-off distance: • Standard / Single Line: 300 mm • Fine: 150 mm • Recommended part size: 0.1–6 m • Physical / operating: • Weight: 1.3 kg • Dimensions: 300 x 150 x 75 mm • Connection: USB 3.0 • Working temperature: -10 to 40°C • IP rating: IP50 • Working humidity: 10–90% non-condensing • Export formats: .stl, .ply, .obj, .txt, .xyz, .asc • Customisable formats: Available • Compatible software: • Hexagon: Inspire, PC-DMIS, DESIGNER, Geomagic, BendingStudio XT • Third-party: PolyWorks, Metrologic, and other software importing point clouds or STL • Key features: • Built-in photogrammetry; target-free and dynamic scanning • Galaxy Mode; 3 main scan modes with on-the-fly switching • Hole Flash Capture; multi-size target recognition (3 / 6 / 12 / 16 mm) • Instant LED visual feedback • Wireless scanning capability • Large stand-off distance • Automation-ready for third-party integration • Combine data from different modes in one point cloud/mesh • Suitable for large or delicate components • Certifications: • Certified to VDI/VDE 2634-3 • Accuracy validation linked to an ISO 17025-certified laboratory • Typical applications / sectors: • Railway, general manufacturing, industrial equipment, automotive, marine, non-manufacturing applications • Quantity: 1 scannerAdditional equipment (accessories, not part of the base machine) • 3 mm positioning targets (ID), self-adhesive • Article code: B841-P007-A • Quantity included: 10 boxes; 1,000 pcs/box (approx. 10,000 pcs total) • 6 mm positioning targets (ID), self-adhesive • Article code: B841-P006-A • Quantity included: 10 boxes; 1,000 pcs/box (approx. 10,000 pcs total) • 6 mm magnetic cubic positioning targets (ID) • Article code: B841-P050-126-A • Quantity included: 1 box; 8 pcs/box • FREEBox-II Wireless Scanning Module • Function: 5G Wi‑Fi wireless transmission and processing of scanning data; increases operator freedom/flexibility • Package includes: • 1x FREEBox II wireless module with strap • 2x 1 m FREEBox II USB cables • 1x power adapter • 1x power cable • 1x FREEBox battery • 1x travel case • 1x screwdriver set • Packing list • Quick installation guide

Condition: good (used), mileage: 342,344 km, power: 176 kW (239.29 HP), first registration: 06/2008, fuel type: diesel, tire size: 265/70R19,5, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro4, suspension: steel-air, total length: 9,300 mm, total width: 2,550 mm, total height: 3,000 mm, loading space length: 5,920 mm, loading space width: 2,490 mm, loading space height: 400 mm, Year of construction: 2008, Equipment: ABS, air conditioning, crane, cruise control, electric window regulation, power mirror, seat heater, tail-lift, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Tail lift - Manual Lodpfx Aezg A Twenxeag - Auxiliary drive - Pump - Seat cover Number of axles: 2, Configuration: 4x2, Unladen weight: 7955 kg, Gross vehicle weight: 12000 kg, Total tank capacity: 200 liters, Fifth wheel coupling: Fixed, Number of differentials: 1, Winch pulling capacity: 300 tons, Suspension type: Air suspension, Type of cab: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Color: White, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Flashing lights, Engine power: 176 kW (236 hp), Fuel: Diesel, Euro: 4, Transmission type: Manual, Transmission type: Volvo, Gears: 6, Clutch pedal, Power steering, ABS, Auxiliary drive, PTO type: 1, Pump, Seat arrangement: 1+1, Seat cover: Seat cover, Seat adjustment: Manual, Crane, Crane manufacturer: Hiab 033T, Crane year of construction: 2007, Crane load capacity: 3300, Maximum load: 930 kg at 3.6 m, Number of support legs: 1, CE certified, Control position: Side control on the right, Crane position: behind the cab, Hydraulic extension: 1, Mechanical extension: 1, Hydraulic additional connection: none, Load hook, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 2000 kg, Tail lift manufacturer: Zepro Z 200-135 MA, Tail lift material: Aluminum, Tail lift size: 146 x 254 Transmission Transmission: VOL, 6 gears, Manual transmission Axle configuration Tire size: 265/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 7 mm; Tire tread depth right: 8 mm; Suspension: Leaf suspension Axle 2: Dual tires; Tire tread depth left inner: 8 mm; Tire tread depth left outer: 9 mm; Tire tread depth right inner: 8 mm; Tire tread depth right outer: 9 mm; Suspension: Air suspension Weights Unladen weight: 7,955 kg Payload: 4,045 kg GVW: 12,000 kg Functional Tail lift: Zepro Z 200-135 MA, Rear door, 2000 kg Crane: Hiab 033T, Year of construction 2007, behind the cab Height of loading platform: 104 cm Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of construction and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website.